how to write an abstract example in research paper

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

Generate accurate APA citations for free

• Knowledge Base
• APA Style 7th edition
• How to write and format an APA abstract

APA Abstract (2020) | Formatting, Length, and Keywords

Published on November 6, 2020 by Raimo Streefkerk . Revised on January 17, 2024.

An APA abstract is a comprehensive summary of your paper in which you briefly address the research problem , hypotheses , methods , results , and implications of your research. It’s placed on a separate page right after the title page and is usually no longer than 250 words.

Most professional papers that are submitted for publication require an abstract. Student papers typically don’t need an abstract, unless instructed otherwise.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

How to format the abstract, how to write an apa abstract, which keywords to use, frequently asked questions, apa abstract example.

Formatting instructions

Follow these five steps to format your abstract in APA Style:

• Insert a running head (for a professional paper—not needed for a student paper) and page number.
• Set page margins to 1 inch (2.54 cm).
• Write “Abstract” (bold and centered) at the top of the page.
• Do not indent the first line.
• Double-space the text.
• Use a legible font like Times New Roman (12 pt.).
• Limit the length to 250 words.
• Indent the first line 0.5 inches.
• Write the label “Keywords:” (italicized).
• Write keywords in lowercase letters.
• Separate keywords with commas.
• Do not use a period after the keywords.

Scribbr Citation Checker New

The AI-powered Citation Checker helps you avoid common mistakes such as:

• Missing commas and periods
• Incorrect usage of “et al.”
• Ampersands (&) in narrative citations
• Missing reference entries

The abstract is a self-contained piece of text that informs the reader what your research is about. It’s best to write the abstract after you’re finished with the rest of your paper.

The questions below may help structure your abstract. Try answering them in one to three sentences each.

• What is the problem? Outline the objective, research questions , and/or hypotheses .
• What has been done? Explain your research methods .
• What did you discover? Summarize the key findings and conclusions .
• What do the findings mean? Summarize the discussion and recommendations .

Check out our guide on how to write an abstract for more guidance and an annotated example.

Guide: writing an abstract

At the end of the abstract, you may include a few keywords that will be used for indexing if your paper is published on a database. Listing your keywords will help other researchers find your work.

Choosing relevant keywords is essential. Try to identify keywords that address your topic, method, or population. APA recommends including three to five keywords.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An APA abstract is around 150–250 words long. However, always check your target journal’s guidelines and don’t exceed the specified word count.

In an APA Style paper , the abstract is placed on a separate page after the title page (page 2).

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Streefkerk, R. (2024, January 17). APA Abstract (2020) | Formatting, Length, and Keywords. Scribbr. Retrieved June 18, 2024, from https://www.scribbr.com/apa-style/apa-abstract/

Is this article helpful?

Raimo Streefkerk

Other students also liked, apa headings and subheadings, apa running head, apa title page (7th edition) | template for students & professionals, scribbr apa citation checker.

An innovative new tool that checks your APA citations with AI software. Say goodbye to inaccurate citations!

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write an Abstract

Expedite peer review, increase search-ability, and set the tone for your study

The abstract is your chance to let your readers know what they can expect from your article. Learn how to write a clear, and concise abstract that will keep your audience reading.

How your abstract impacts editorial evaluation and future readership

After the title , the abstract is the second-most-read part of your article. A good abstract can help to expedite peer review and, if your article is accepted for publication, it’s an important tool for readers to find and evaluate your work. Editors use your abstract when they first assess your article. Prospective reviewers see it when they decide whether to accept an invitation to review. Once published, the abstract gets indexed in PubMed and Google Scholar , as well as library systems and other popular databases. Like the title, your abstract influences keyword search results. Readers will use it to decide whether to read the rest of your article. Other researchers will use it to evaluate your work for inclusion in systematic reviews and meta-analysis. It should be a concise standalone piece that accurately represents your research. 

What to include in an abstract

The main challenge you’ll face when writing your abstract is keeping it concise AND fitting in all the information you need. Depending on your subject area the journal may require a structured abstract following specific headings. A structured abstract helps your readers understand your study more easily. If your journal doesn’t require a structured abstract it’s still a good idea to follow a similar format, just present the abstract as one paragraph without headings. 

Background or Introduction – What is currently known? Start with a brief, 2 or 3 sentence, introduction to the research area. 

Objectives or Aims – What is the study and why did you do it? Clearly state the research question you’re trying to answer.

Methods – What did you do? Explain what you did and how you did it. Include important information about your methods, but avoid the low-level specifics. Some disciplines have specific requirements for abstract methods. 

• CONSORT for randomized trials.
• STROBE for observational studies
• PRISMA for systematic reviews and meta-analyses

Results – What did you find? Briefly give the key findings of your study. Include key numeric data (including confidence intervals or p values), where possible.

Conclusions – What did you conclude? Tell the reader why your findings matter, and what this could mean for the ‘bigger picture’ of this area of research. 

Writing tips

The main challenge you may find when writing your abstract is keeping it concise AND convering all the information you need to.

• Keep it concise and to the point. Most journals have a maximum word count, so check guidelines before you write the abstract to save time editing it later.
• Write for your audience. Are they specialists in your specific field? Are they cross-disciplinary? Are they non-specialists? If you’re writing for a general audience, or your research could be of interest to the public keep your language as straightforward as possible. If you’re writing in English, do remember that not all of your readers will necessarily be native English speakers.
• Focus on key results, conclusions and take home messages.
• Write your paper first, then create the abstract as a summary.
• Check the journal requirements before you write your abstract, eg. required subheadings.
• Include keywords or phrases to help readers search for your work in indexing databases like PubMed or Google Scholar.
• Double and triple check your abstract for spelling and grammar errors. These kind of errors can give potential reviewers the impression that your research isn’t sound, and can make it easier to find reviewers who accept the invitation to review your manuscript. Your abstract should be a taste of what is to come in the rest of your article.

Don’t

• Sensationalize your research.
• Speculate about where this research might lead in the future.
• Use abbreviations or acronyms (unless absolutely necessary or unless they’re widely known, eg. DNA).
• Repeat yourself unnecessarily, eg. “Methods: We used X technique. Results: Using X technique, we found…”
• Contradict anything in the rest of your manuscript.
• Include content that isn’t also covered in the main manuscript.
• Include citations or references.

Tip: How to edit your work

Editing is challenging, especially if you are acting as both a writer and an editor. Read our guidelines for advice on how to refine your work, including useful tips for setting your intentions, re-review, and consultation with colleagues.

• How to Write a Great Title
• How to Write Your Methods
• How to Report Statistics
• How to Write Discussions and Conclusions
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

• Privacy Policy

Home » Research Paper Abstract – Writing Guide and Examples

Research Paper Abstract – Writing Guide and Examples

Table of Contents

Research Paper Abstract

Research Paper Abstract is a brief summary of a research pape r that describes the study’s purpose, methods, findings, and conclusions . It is often the first section of the paper that readers encounter, and its purpose is to provide a concise and accurate overview of the paper’s content. The typical length of an abstract is usually around 150-250 words, and it should be written in a concise and clear manner.

Research Paper Abstract Structure

The structure of a research paper abstract usually includes the following elements:

• Background or Introduction: Briefly describe the problem or research question that the study addresses.
• Methods : Explain the methodology used to conduct the study, including the participants, materials, and procedures.
• Results : Summarize the main findings of the study, including statistical analyses and key outcomes.
• Conclusions : Discuss the implications of the study’s findings and their significance for the field, as well as any limitations or future directions for research.
• Keywords : List a few keywords that describe the main topics or themes of the research.

How to Write Research Paper Abstract

Here are the steps to follow when writing a research paper abstract:

• Start by reading your paper: Before you write an abstract, you should have a complete understanding of your paper. Read through the paper carefully, making sure you understand the purpose, methods, results, and conclusions.
• Identify the key components : Identify the key components of your paper, such as the research question, methods used, results obtained, and conclusion reached.
• Write a draft: Write a draft of your abstract, using concise and clear language. Make sure to include all the important information, but keep it short and to the point. A good rule of thumb is to keep your abstract between 150-250 words.
• Use clear and concise language : Use clear and concise language to explain the purpose of your study, the methods used, the results obtained, and the conclusions drawn.
• Emphasize your findings: Emphasize your findings in the abstract, highlighting the key results and the significance of your study.
• Revise and edit: Once you have a draft, revise and edit it to ensure that it is clear, concise, and free from errors.
• Check the formatting: Finally, check the formatting of your abstract to make sure it meets the requirements of the journal or conference where you plan to submit it.

Research Paper Abstract Examples

Research Paper Abstract Examples could be following:

Title : “The Effectiveness of Cognitive-Behavioral Therapy for Treating Anxiety Disorders: A Meta-Analysis”

Abstract : This meta-analysis examines the effectiveness of cognitive-behavioral therapy (CBT) in treating anxiety disorders. Through the analysis of 20 randomized controlled trials, we found that CBT is a highly effective treatment for anxiety disorders, with large effect sizes across a range of anxiety disorders, including generalized anxiety disorder, panic disorder, and social anxiety disorder. Our findings support the use of CBT as a first-line treatment for anxiety disorders and highlight the importance of further research to identify the mechanisms underlying its effectiveness.

Title : “Exploring the Role of Parental Involvement in Children’s Education: A Qualitative Study”

Abstract : This qualitative study explores the role of parental involvement in children’s education. Through in-depth interviews with 20 parents of children in elementary school, we found that parental involvement takes many forms, including volunteering in the classroom, helping with homework, and communicating with teachers. We also found that parental involvement is influenced by a range of factors, including parent and child characteristics, school culture, and socio-economic status. Our findings suggest that schools and educators should prioritize building strong partnerships with parents to support children’s academic success.

Title : “The Impact of Exercise on Cognitive Function in Older Adults: A Systematic Review and Meta-Analysis”

Abstract : This paper presents a systematic review and meta-analysis of the existing literature on the impact of exercise on cognitive function in older adults. Through the analysis of 25 randomized controlled trials, we found that exercise is associated with significant improvements in cognitive function, particularly in the domains of executive function and attention. Our findings highlight the potential of exercise as a non-pharmacological intervention to support cognitive health in older adults.

When to Write Research Paper Abstract

The abstract of a research paper should typically be written after you have completed the main body of the paper. This is because the abstract is intended to provide a brief summary of the key points and findings of the research, and you can’t do that until you have completed the research and written about it in detail.

Once you have completed your research paper, you can begin writing your abstract. It is important to remember that the abstract should be a concise summary of your research paper, and should be written in a way that is easy to understand for readers who may not have expertise in your specific area of research.

Purpose of Research Paper Abstract

The purpose of a research paper abstract is to provide a concise summary of the key points and findings of a research paper. It is typically a brief paragraph or two that appears at the beginning of the paper, before the introduction, and is intended to give readers a quick overview of the paper’s content.

The abstract should include a brief statement of the research problem, the methods used to investigate the problem, the key results and findings, and the main conclusions and implications of the research. It should be written in a clear and concise manner, avoiding jargon and technical language, and should be understandable to a broad audience.

The abstract serves as a way to quickly and easily communicate the main points of a research paper to potential readers, such as academics, researchers, and students, who may be looking for information on a particular topic. It can also help researchers determine whether a paper is relevant to their own research interests and whether they should read the full paper.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Table of Contents – Types, Formats, Examples

Research Paper Title Page – Example and Making...

Context of the Study – Writing Guide and Examples

Research Paper Title – Writing Guide and Example

Tables in Research Paper – Types, Creating Guide...

Scope of the Research – Writing Guide and...

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Prevent plagiarism, run a free check.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 18 June 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

Reference management. Clean and simple.

How to write an abstract

What is an abstract?

General format of an abstract, the content of an abstract, abstract example, abstract style guides, frequently asked questions about writing an abstract, related articles.

An abstract is a summary of the main contents of a paper.

The abstract is the first glimpse that readers get of the content of a research paper. It can influence the popularity of a paper, as a well-written one will attract readers, and a poorly-written one will drive them away.

➡️ Different types of papers may require distinct abstract styles. Visit our guide on the different types of research papers to learn more.

Tip: Always wait until you’ve written your entire paper before you write the abstract.

Before you actually start writing an abstract, make sure to follow these steps:

• Read other papers : find papers with similar topics, or similar methodologies, simply to have an idea of how others have written their abstracts. Notice which points they decided to include, and how in depth they described them.
• Double check the journal requirements : always make sure to review the journal guidelines to format your paper accordingly. Usually, they also specify abstract's formats.
• Write the abstract after you finish writing the paper : you can only write an abstract once you finish writing the whole paper. This way you can include all important aspects, such as scope, methodology, and conclusion.

➡️ Read more about  what is a research methodology?

The general format of an abstract includes the following features:

• Between 150-300 words .
• An independent page , after the title page and before the table of contents.
• Concise summary including the aim of the research, methodology , and conclusion .
• Keywords describing the content.

As mentioned before, an abstract is a text that summarizes the main points of a research. Here is a break down of each element that should be included in an abstract:

• Purpose : every abstract should start by describing the main purpose or aim of the research.
• Methods : as a second point, the methodology carried out should be explained.
• Results : then, a concise summary of the results should be included.
• Conclusion : finally, a short outline of the general outcome of the research should be given.
• Keywords : along with the abstract, specific words and phrases related to the topics discussed in the research should be added. These words are usually around five, but the number can vary depending on the journal's guidelines.

This abstract, taken from ScienceDirect , illustrates the ideal structure of an abstract. It has 155 words, it's concise, and it clearly shows the division of elements necessary to write a successful abstract.

This paper explores the implicit assumption in the growing body of literature that social media usage is fundamentally different in business-to-business (B2B) companies than in the extant business-to-consumer (B2C) literature. Sashi's (2012) customer engagement cycle is utilized to compare organizational practices in relation to social media marketing in B2B, B2C, Mixed B2B/B2C and B2B2C business models. Utilizing 449 responses to an exploratory panel based survey instrument, we clearly identify differences in social media usage and its perceived importance as a communications channel. In particular we identify distinct differences in the relationship between social media importance and the perceived effectiveness of social media marketing across business models. Our results indicate that B2B social media usage is distinct from B2C, Mixed and B2B2C business model approaches. Specifically B2B organizational members perceive social media to have a lower overall effectiveness as a channel and identify it as less important for relationship oriented usage than other business models.

The exact format of an abstract depends on the citation style you implement. Whether it’s a well-known style (like APA, IEEE, etc.) or a journal's style, each format has its own guidelines, so make sure you know which style you are using before writing your abstract.

APA is one of the most commonly used styles to format an abstract. Therefore, we created a guide with exact instructions on how to write an abstract in APA style, and a template to download:

📕 APA abstract page: format and template

Additionally, you will find below an IEEE and ASA abstract guide by Purdue Online Writing Lab :

📗 IEEE General Format - Abstract

📘 ASA Manuscript Formatting - Abstract

No. You should always write an abstract once you finish writing the whole paper. This way you can include all important aspects of the paper, such as scope, methodology, and conclusion.

The length of an abstract depends on the formatting style of the paper. For example, APA style calls for 150 to 250 words. Generally, you need between 150-300 words.

No. An abstract has an independent section after the title page and before the table of contents, and should not be included in the table of contents.

Take a look at APA abstract page: format and template for exact details on how to format an abstract in APA style.

You can access any paper through Google Scholar or any other search engine; pick a paper and read the abstract. Abstracts are always freely available to read.

How to Write an Abstract APA Format

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

An APA abstract is a brief, comprehensive summary of the contents of an article, research paper, dissertation, or report.

It is written in accordance with the guidelines of the American Psychological Association (APA), which is a widely used format in social and behavioral sciences. 

An APA abstract summarizes, usually in one paragraph of between 150–250 words, the major aspects of a research paper or dissertation in a prescribed sequence that includes:

• The rationale: the overall purpose of the study, providing a clear context for the research undertaken.
• Information regarding the method and participants: including materials/instruments, design, procedure, and data analysis.
• Main findings or trends: effectively highlighting the key outcomes of the hypotheses.
• Interpretations and conclusion(s): solidify the implications of the research.
• Keywords related to the study: assist the paper’s discoverability in academic databases.

The abstract should stand alone, be “self-contained,” and make sense to the reader in isolation from the main article.

The purpose of the abstract is to give the reader a quick overview of the essential information before reading the entire article. The abstract is placed on its own page, directly after the title page and before the main body of the paper.

Although the abstract will appear as the very first part of your paper, it’s good practice to write your abstract after you’ve drafted your full paper, so that you know what you’re summarizing.

Note : This page reflects the latest version of the APA Publication Manual (i.e., APA 7), released in October 2019.

Structure of the Abstract

[NOTE: DO NOT separate the components of the abstract – it should be written as a single paragraph. This section is separated to illustrate the abstract’s structure.]

1) The Rationale

One or two sentences describing the overall purpose of the study and the research problem(s) you investigated. You are basically justifying why this study was conducted.

• What is the importance of the research?
• Why would a reader be interested in the larger work?
• For example, are you filling a gap in previous research or applying new methods to take a fresh look at existing ideas or data?
• Women who are diagnosed with breast cancer can experience an array of psychosocial difficulties; however, social support, particularly from a spouse, has been shown to have a protective function during this time. This study examined the ways in which a woman’s daily mood, pain, and fatigue, and her spouse’s marital satisfaction predict the woman’s report of partner support in the context of breast cancer.
• The current nursing shortage, high hospital nurse job dissatisfaction, and reports of uneven quality of hospital care are not uniquely American phenomena.
• Students with special educational needs and disabilities (SEND) are more likely to exhibit behavioral difficulties than their typically developing peers. The aim of this study was to identify specific risk factors that influence variability in behavior difficulties among individuals with SEND.

2) The Method

Information regarding the participants (number, and population). One or two sentences outlining the method, explaining what was done and how. The method is described in the present tense.

• Pretest data from a larger intervention study and multilevel modeling were used to examine the effects of women’s daily mood, pain, and fatigue and average levels of mood, pain, and fatigue on women’s report of social support received from her partner, as well as how the effects of mood interacted with partners’ marital satisfaction.
• This paper presents reports from 43,000 nurses from more than 700 hospitals in the United States, Canada, England, Scotland, and Germany in 1998–1999.
• The study sample comprised 4,228 students with SEND, aged 5–15, drawn from 305 primary and secondary schools across England. Explanatory variables were measured at the individual and school levels at baseline, along with a teacher-reported measure of behavior difficulties (assessed at baseline and the 18-month follow-up).

3) The Results

One or two sentences indicating the main findings or trends found as a result of your analysis. The results are described in the present or past tense.

• Results show that on days in which women reported higher levels of negative or positive mood, as well as on days they reported more pain and fatigue, they reported receiving more support. Women who, on average, reported higher levels of positive mood tended to report receiving more support than those who, on average, reported lower positive mood. However, average levels of negative mood were not associated with support. Higher average levels of fatigue but not pain were associated with higher support. Finally, women whose husbands reported higher levels of marital satisfaction reported receiving more partner support, but husbands’ marital satisfaction did not moderate the effect of women’s mood on support.
• Nurses in countries with distinctly different healthcare systems report similar shortcomings in their work environments and the quality of hospital care. While the competence of and relation between nurses and physicians appear satisfactory, core problems in work design and workforce management threaten the provision of care.
• Hierarchical linear modeling of data revealed that differences between schools accounted for between 13% (secondary) and 15.4% (primary) of the total variance in the development of students’ behavior difficulties, with the remainder attributable to individual differences. Statistically significant risk markers for these problems across both phases of education were being male, eligibility for free school meals, being identified as a bully, and lower academic achievement. Additional risk markers specific to each phase of education at the individual and school levels are also acknowledged.

4) The Conclusion / Implications

A brief summary of your conclusions and implications of the results, described in the present tense. Explain the results and why the study is important to the reader.

• For example, what changes should be implemented as a result of the findings of the work?
• How does this work add to the body of knowledge on the topic?

Implications of these findings are discussed relative to assisting couples during this difficult time in their lives.

• Resolving these issues, which are amenable to managerial intervention, is essential to preserving patient safety and care of consistently high quality.
• Behavior difficulties are affected by risks across multiple ecological levels. Addressing any one of these potential influences is therefore likely to contribute to the reduction in the problems displayed.

The above examples of abstracts are from the following papers:

Aiken, L. H., Clarke, S. P., Sloane, D. M., Sochalski, J. A., Busse, R., Clarke, H., … & Shamian, J. (2001). Nurses’ reports on hospital care in five countries . Health affairs, 20(3) , 43-53.

Boeding, S. E., Pukay-Martin, N. D., Baucom, D. H., Porter, L. S., Kirby, J. S., Gremore, T. M., & Keefe, F. J. (2014). Couples and breast cancer: Women’s mood and partners’ marital satisfaction predicting support perception . Journal of Family Psychology, 28(5) , 675.

Oldfield, J., Humphrey, N., & Hebron, J. (2017). Risk factors in the development of behavior difficulties among students with special educational needs and disabilities: A multilevel analysis . British journal of educational psychology, 87(2) , 146-169.

5) Keywords

APA style suggests including a list of keywords at the end of the abstract. This is particularly common in academic articles and helps other researchers find your work in databases.

Keywords in an abstract should be selected to help other researchers find your work when searching an online database. These keywords should effectively represent the main topics of your study. Here are some tips for choosing keywords:

Core Concepts: Identify the most important ideas or concepts in your paper. These often include your main research topic, the methods you’ve used, or the theories you’re discussing.

Specificity: Your keywords should be specific to your research. For example, suppose your paper is about the effects of climate change on bird migration patterns in a specific region. In that case, your keywords might include “climate change,” “bird migration,” and the region’s name.

Consistency with Paper: Make sure your keywords are consistent with the terms you’ve used in your paper. For example, if you use the term “adolescent” rather than “teen” in your paper, choose “adolescent” as your keyword, not “teen.”

Jargon and Acronyms: Avoid using too much-specialized jargon or acronyms in your keywords, as these might not be understood or used by all researchers in your field.

Synonyms: Consider including synonyms of your keywords to capture as many relevant searches as possible. For example, if your paper discusses “post-traumatic stress disorder,” you might include “PTSD” as a keyword.

Remember, keywords are a tool for others to find your work, so think about what terms other researchers might use when searching for papers on your topic.

The Abstract SHOULD NOT contain:

Lengthy background or contextual information: The abstract should focus on your research and findings, not general topic background.

Undefined jargon, abbreviations,  or acronyms: The abstract should be accessible to a wide audience, so avoid highly specialized terms without defining them.

Citations: Abstracts typically do not include citations, as they summarize original research.

Incomplete sentences or bulleted lists: The abstract should be a single, coherent paragraph written in complete sentences.

New information not covered in the paper: The abstract should only summarize the paper’s content.

Subjective comments or value judgments: Stick to objective descriptions of your research.

Excessive details on methods or procedures: Keep descriptions of methods brief and focused on main steps.

Speculative or inconclusive statements: The abstract should state the research’s clear findings, not hypotheses or possible interpretations.

• Any illustration, figure, table, or references to them . All visual aids, data, or extensive details should be included in the main body of your paper, not in the abstract. 
• Elliptical or incomplete sentences should be avoided in an abstract . The use of ellipses (…), which could indicate incomplete thoughts or omitted text, is not appropriate in an abstract.

APA Style for Abstracts

An APA abstract must be formatted as follows:

Include the running head aligned to the left at the top of the page (professional papers only) and page number. Note, student papers do not require a running head. On the first line, center the heading “Abstract” and bold (do not underlined or italicize). Do not indent the single abstract paragraph (which begins one line below the section title). Double-space the text. Use Times New Roman font in 12 pt. Set one-inch (or 2.54 cm) margins. If you include a “keywords” section at the end of the abstract, indent the first line and italicize the word “Keywords” while leaving the keywords themselves without any formatting.

Example APA Abstract Page

Download this example as a PDF

Further Information

• APA 7th Edition Abstract and Keywords Guide
• Example APA Abstract
• How to Write a Good Abstract for a Scientific Paper or Conference Presentation
• How to Write a Lab Report
• Writing an APA paper

How long should an APA abstract be?

An APA abstract should typically be between 150 to 250 words long. However, the exact length may vary depending on specific publication or assignment guidelines. It is crucial that it succinctly summarizes the essential elements of the work, including purpose, methods, findings, and conclusions.

Where does the abstract go in an APA paper?

In an APA formatted paper, the abstract is placed on its own page, directly after the title page and before the main body of the paper. It’s typically the second page of the document. It starts with the word “Abstract” (centered and not in bold) at the top of the page, followed by the text of the abstract itself.

What are the 4 C’s of abstract writing?

The 4 C’s of abstract writing are an approach to help you create a well-structured and informative abstract. They are:

Conciseness: An abstract should briefly summarize the key points of your study. Stick to the word limit (typically between 150-250 words for an APA abstract) and avoid unnecessary details.

Clarity: Your abstract should be easy to understand. Avoid jargon and complex sentences. Clearly explain the purpose, methods, results, and conclusions of your study.

Completeness: Even though it’s brief, the abstract should provide a complete overview of your study, including the purpose, methods, key findings, and your interpretation of the results.

Cohesion: The abstract should flow logically from one point to the next, maintaining a coherent narrative about your study. It’s not just a list of disjointed elements; it’s a brief story of your research from start to finish.

What is the abstract of a psychology paper?

An abstract in a psychology paper serves as a snapshot of the paper, allowing readers to quickly understand the purpose, methodology, results, and implications of the research without reading the entire paper. It is generally between 150-250 words long.

Related Articles

Student Resources

How To Cite A YouTube Video In APA Style – With Examples

APA References Page Formatting and Example

APA Title Page (Cover Page) Format, Example, & Templates

How do I Cite a Source with Multiple Authors in APA Style?

How to Write a Psychology Essay

Lab Report Format: Step-by-Step Guide & Examples

How to write an abstract for a research paper

Read about three elements to include in your research paper abstract and some tips for making yours stand out

Ankitha Shetty

• More on this topic

Created in partnership with

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} The secrets to success as a provost

Using non verbal cues to build rapport with students, emotionally challenging research and researcher well-being, augmenting the doctoral thesis in preparation for a viva, how hard can it be testing ai detection tools.

Writing an abstract might not seem to be at the top of your list of priorities when writing your PhD dissertation , but it’s probably the first thing a reader will see when they encounter your research, so it’s worth putting the effort in to get it right. Here are some ways to make it sing. 

What is an abstract?

An abstract is a concise overview of an extensive piece of research work such as a thesis, dissertation or research paper. Depending on the discipline, it usually contains the purpose of the research, the methodologies employed and the conclusions derived. Abstracts typically range from 500 to 800 words and appear on a separate page after the title page and acknowledgements, but preceding the table of contents. Although it might be tempting to start your thesis by drafting your abstract, I advise postponing until you’ve completed a first draft so that you ensure you cover all topics discussed in your thesis.

What to include in your abstract

Purpose of the study.

Begin your abstract by concisely defining the problems your study addresses or outlining the gaps in knowledge it fills. It should provide the reader with new and useful information regarding your research in the present or past tense. Use verbs such as “test”, “evaluate” and “analyse” to make the research objective specific, measurable, attainable and time-bound. Avoid providing detailed background information and personal opinions at this stage.

In this part of your abstract, explain how you designed and conducted your research and how it addresses your research questions in the past tense. The aim here is to give the reader a prompt insight into your approach, not to evaluate challenges, validity and reliability. Highlight the samples you used and the data collection and analysis tools you employed. 

• Campus resource collection: What I wish I’d known about academia
• Campus resource collection: Resources on academic writing
• What is your academic writing temperament?

Results and conclusion

Summarise and highlight the most significant findings that will allow the reader to understand the conclusions in the present or past tense. At the end of your abstract, the reader ought to have a firm grasp of the main argument. If the motive of the research is to resolve a real-world issue, you can include practical implications and suggestions in the findings. Briefly offer future recommendations for further research, if applicable. 

When writing your abstract, imagine who might read your research; a curious reader, not necessarily an expert in the field, expects the information to be accessible and not overly complex. 

Tips on how to write an abstract for a research paper

• Explain why you chose this area of research and the significance of the study
• Ask yourself “why?” “what?” “how?” and “so what?” and use the abstract to address these questions. 
• Highlight the novelty of your research 
• Explain how your research adds to the existing body of literature on the topic
• Explain your research design, highlighting elements such as approach, demographics, sampling and geographical information
• Explain how your research is relevant and significant
• Address practical implications to potential interested parties – for example, any issues relating to policy 
• Avoid technical jargon, generalised statements and vague claims that make your work difficult to read
• Avoid acronyms and abbreviations at this stage. Add them into the introduction instead 
• Provide concise, consistent and accurate details
• Adhere to the word count limit specified in your instructions
• Include essential keywords for search engine optimisation
• There’s no need to include references at this stage
• Never copy and paste content directly from elsewhere in the thesis; use new vocabulary and phrases to differentiate the abstract from the rest of the text.

These tips will help to make the abstract writing process smoother, allowing you to make a good first impression on whoever comes across your work when you’re ready to send it out into the world.

Ankitha Shetty is an assistant professor (senior scale) at the department of commerce and a coordinator at the Centre for Doctoral Studies at Manipal Academy of Higher Education, India.

If you would like advice and insight from academics and university staff delivered direct to your inbox each week, sign up for the Campus newsletter.

The secrets to success as a provost

Emotions and learning: what role do emotions play in how and why students learn, the podcast: bringing an outsider’s eye to primary sources, a diy guide to starting your own journal, formative, summative or diagnostic assessment a guide, harnessing the power of data to drive student success.

Register for free

and unlock a host of features on the THE site

How To Write an Abstract for Any Subject and Publication (With Examples)

Table of contents

Christian Rigg

An abstract is a short summary of a longer work, such as a study or research paper. The goal is to provide readers with an overview of the purpose, methodology, results, conclusion, and importance of this text.

As a writing coach and part-time academic editor and translator, I’ve read hundreds of abstracts and helped authors draft and refine dozens more. I’ve found that, when writing an abstract, the greatest difficulty lies in balancing brevity, detail, and accessibility.

Fortunately, there’s a simple formula you can use to write a solid abstract for publication, regardless of the subject. What’s more, you can leverage AI to help you write a clear, concise abstract — without losing your voice or sounding unprofessional.

Below you’ll find step-by-step instructions, best practices, examples, and a helpful checklist. 

Key Takeaways

• An abstract offers a succinct overview of the aims, results, and importance of your research.
• Check submission guidelines, write clearly and concisely, and use language to “guide” readers through your abstract. 
• The IMRaD (Introduction, Methodology, Results, and Discussion) approach is simple and effective. 
• More and more authors are using AI to do the heavy lifting. With the right prompts, AI can save you time and create a cohesive abstract.

Writing an abstract: First steps and best practices

Keep the following in mind as you write your abstract:

• If you’re submitting to a publication , check for specific guidelines regarding overall length, format, keywords, and the presence or absence of section headings (e.g. “Purpose”). Follow these guidelines exactly.
• Write concisely and clearly . If you struggle to write concisely, consider using an AI-writing assistant like Wordtune . Simply select text to receive suggestions on how to write a sentence or paragraph more concisely without losing any value.
• Make your abstract self-contained . Don’t refer to passages in your article or research. If you must include terms that your audience may not be familiar with, such as highly technical jargon or concepts borrowed from another field, offer a brief definition.
• Use connecting phrases like “for this reason,” “as a result,” and “this led us” to “guide” the reader through your abstract and help them see the connections between your research goal, methodology, results, and conclusions. ‍
• Read abstracts on similar studies . This gives you a good benchmark and can help you get started. If you’re submitting your abstract to a particular publication, it also gives you a good idea of the type of language and structure they prefer.

Get Wordtune for free > Get Wordtune for free >

How to write an abstract: The IMRaD Structure

IMRaD stands for Introduction, Methodology, Results, and Discussion (or Conclusion). 

It’s the most common way to structure a research paper and a very simple way to approach your abstract. In some cases, authors even include these section headings in their abstracts. 

Step One: Introduction

Length : About 25% of your abstract

Purpose : Provide context for your research and describe your research objectives. 

Start by introducing your topic. There are two main parts to this:

• Your research question stated simply and straightforwardly (what missing knowledge does your study aim to answer?). You can use words like “investigate,” “review,” “test,” “analyze,” “study,” and “evaluate” to make it clear how your work relates to the context.
• A brief overview of the academic, historical, social, or scientific context. This helps the reader understand the importance and relevance of your work. In many cases, starting with context before your research question makes more sense, so feel free to write in that order. 

Regarding context, consider the following: 

For example:

Psychologists and neuroscientists have long studied the role of sleep in the formation of new memories. Previous research into how sleep affects memory has often struggled because it’s difficult to measure the quality, stages, and overall impact of sleep accurately. As a result, there’s ongoing debate in the scientific community , and recent research suggests sleep may not be as important as researchers once thought. In this study, we review the evidence and offer a novel conclusion : the same mechanisms thought to mediate sleep-related memory formation also operate during waking hours, particularly quiet wakefulness.  In this example, several contextual cues are offered: it’s a long-standing topic in the literature; previous research is limited due to a specific issue , and there is active scientific debate . The section closes with the research aims: to review the evidence and offer a new conclusion. 

Step Two: Methodology

Purpose : Clearly describe what you did and highlight novelty. 

In this section, provide a clear description of your research methodology. While it’s important to be concise, make sure you’re not being vague. Mention specific frameworks and tools. 

‍ To explore the impact of social media on political engagement, we conducted a study with 200 participants, divided into two groups. The first was exposed to curated political content on social media, while the control group received a neutral feed. Our mixed-method approach combined quantitative engagement metrics analysis and qualitative interviews to assess changes in political participation.

There’s no need to provide an in-depth justification of your approach, although if it’s a novel one, it’s worth highlighting this and explaining what makes it appropriate. For example, " We chose this approach because it offers a clearer image of the structure of proteins involved in the transfer of electrons during cellular respiration ."

Finally, you can omit methodological limitations; we’ll cover these later. 

Step Three: Results

Length : About 35% of your abstract

Purpose : Provide a clear, specific account of your results. 

This section is arguably the most important (and interesting) part of your abstract.

Explain the results of your analysis in a specific and detailed fashion. This isn’t the time to be vague or bury the lead. For example:

“Our survey indicates a marked shift in sedimentary rock composition. In three locations, we observed significant erosion, and mineralogical analysis revealed a high concentration of quartz. Further analysis suggests two major events in the past 200 years, correlating with disturbances in the region.”

"Our survey of the Redstone Canyon region identified a marked shift in sedimentary rock composition from predominantly sandstone to shale, particularly evident in the lower strata. Quantitative analysis showed a 40% increase in shale content compared to previous surveys. In three distinct locations, we observed significant erosion, with up to two meters of topsoil displacement, primarily due to water runoff. Mineralogical analysis revealed an unexpectedly high concentration of quartz (up to 22%) in these eroded areas. Additionally, our seismic retrogression analysis suggests two major seismic events in the past 200 years, correlating with the observed stratification disturbances."

Incidentally, you don’t need to include all of your findings here, only those that will help the reader to understand the next section: your discussion and conclusion (i.e., what the results mean). This will help you keep the results section concise and relevant. 

Step Four: Discussion/Conclusion

Length : About 15%

Purpose : Present what new knowledge you’ve found and why it matters.

Bearing in mind your research question, give a clear account of your conclusions. What new knowledge has been gained? 

The simplest way to do this is in the present tense: “We conclude that…”

You should also briefly explain why this matters. What are the implications of your findings? Be specific and avoid making claims that aren’t directly supported by your research. 

If there are any important limitations (such as population or control group size), you can mention them now. This helps readers assess the credibility and generalizability of your findings. 

You can use these samples for inspiration.

They are divided into introduction , methodology , results , and conclusion.

The rising urbanization rate poses challenges to mental health, an issue garnering increasing attention in recent years. This study aims to analyze the impact of urban green spaces on the mental health of city dwellers. The focus is on how access to parks and natural environments within urban settings contributes to psychological well-being . For this purpose, we employed a cross-sectional survey methodology, targeting residents in three major cities with varying levels of green space availability. We used a combination of GIS mapping to determine green space distribution and structured questionnaires to assess mental health indicators among 1,000 participants . Our results show a clear correlation between access to green spaces and improved mental health outcomes. Residents with frequent access to parks reported 30% lower stress levels and a 25% reduction in symptoms related to anxiety and depression, compared to those with limited access. Additionally, our analysis revealed that green spaces in dense urban areas had a more significant impact than those in less populated districts . We conclude that urban green spaces play a crucial role in enhancing mental health. This underscores the importance of urban planning policies that prioritize green space development as a public health strategy. These findings have significant implications for city planning and public health policy, advocating for the integration of green spaces in urban development to foster mental well-being .

The phenomenon of antibiotic resistance is a growing concern in medical science. This study investigates the effectiveness of novel synthetic peptides as potential antibiotics against multi-drug resistant bacteria. The research specifically examines the impact of these peptides on the cellular integrity and replication processes of resistant bacterial strains . Our methodology involved in vitro testing of three newly synthesized peptides against a panel of bacteria known for high resistance to conventional antibiotics. The bacterial strains included methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococci (VRE). We used a combination of microbiological assays and electron microscopy to evaluate the antibacterial activity and the cellular changes induced by the peptides . The results were promising, showing that two of the three peptides effectively inhibited the growth of MRSA and VRE at low concentrations. Electron microscopy revealed significant disruption of bacterial cell walls and membranes, leading to cell lysis. These peptides also demonstrated low toxicity in preliminary mammalian cell culture tests, suggesting a high therapeutic index . Our study provides promising evidence for the use of synthetic peptides in combating antibiotic-resistant bacteria. These findings open new avenues for developing effective treatments against infections caused by drug-resistant pathogens and highlight the potential of peptide-based therapies in future pharmaceutical applications .

The integration of artificial intelligence (AI) in education is a rapidly evolving area of study. This research explores the effectiveness of AI-driven personalized learning systems in enhancing student performance in high school mathematics. The study focuses on understanding how AI customization impacts learning outcomes compared to traditional teaching methods . We conducted a randomized controlled trial involving 500 high school students from five schools, divided into two groups. The experimental group used an AI-based learning platform that adapted to each student's learning pace and style, while the control group continued with standard classroom instruction. The study measured improvements in mathematical understanding and problem-solving skills over a six-month period . The results indicated a significant improvement in the AI group, with a 40% increase in test scores and a 35% rise in problem-solving abilities compared to the control group. Additionally, students using the AI system reported higher levels of engagement and satisfaction with the learning process . In conclusion, the use of AI-driven personalized learning systems shows considerable promise in enhancing educational outcomes in mathematics. This study suggests that AI personalization can be a valuable tool in modern educational strategies, potentially revolutionizing how subjects are taught and learned in schools .

What is the main objective of an abstract?

The goal of an abstract is to provide readers with a concise overview of the purpose, methodology, results, conclusion, and importance of a longer work, such as a research paper or study. 

How long should an abstract be?

Depending on the publication, an abstract should be anywhere from 150 to 250 words. 

What should an abstract include?

An abstract should include an introduction (context + research question), the methodology, the results, and a conclusion (what you found and why it matters).

IMRaD is a simple formula you can follow to write a great abstract for any topic and publication type. Simply follow the instructions above to write each section: Introduction, Methodology, Results, and Discussion/Conclusion.

Be careful to balance detail with brevity, as abstracts are meant to be a short overview of your study. If you struggle with writing concisely and clearly, consider using a writing aid like Wordtune to handle some of the heavy lifting. 

Want to learn more key writing tips? Check out these articles:

• How to Write Concisely and Effectively (+Examples)
• Transition Word Examples and How to Use Them Effectively
• How to Write a Research Paper (+Free AI Research Paper Writer)

Share This Article:

The Dos and Don’ts of Using AI to Study

How to Use Modal Verbs for Clear Communication

A Friendly Guide to Apostrophes vs Quotation Marks

Looking for fresh content, thank you your submission has been received.

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write an Abstract for a Research Paper | Examples

What is a research paper abstract?

Research paper abstracts summarize your study quickly and succinctly to journal editors and researchers and prompt them to read further. But with the ubiquity of online publication databases, writing a compelling abstract is even more important today than it was in the days of bound paper manuscripts.

Abstracts exist to “sell”  your work, and they could thus be compared to the “executive summary” of a business resume: an official briefing on what is most important about your research. Or the “gist” of your research. With the majority of academic transactions being conducted online, this means that you have even less time to impress readers–and increased competition in terms of other abstracts out there to read.

The APCI (Academic Publishing and Conferences International) notes that there are  12 questions or “points” considered in the selection process  for journals and conferences and stresses the importance of having an abstract that ticks all of these boxes. Because it is often the ONLY chance you have to convince readers to keep reading, it is important that you spend time and energy crafting an abstract that faithfully represents the central parts of your study and captivates your audience.

With that in mind, follow these suggestions when structuring and writing your abstract, and learn how exactly to put these ideas into a solid abstract that will captivate your target readers.

Before Writing Your Abstract

How long should an abstract be.

All abstracts are written with the same essential objective: to give a summary of your study. But there are two basic styles of abstract: descriptive and informative . Here is a brief delineation of the two:

Of the two types of abstracts, informative abstracts are much more common, and they are widely used for submission to journals and conferences. Informative abstracts apply to lengthier and more technical research and are common in the sciences, engineering, and psychology, while descriptive abstracts are more likely used in humanities and social science papers. The best method of determining which abstract type you need to use is to follow the instructions for journal submissions and to read as many other published articles in those journals as possible.

Research Abstract Guidelines and Requirements

As any article about research writing will tell you, authors must always closely follow the specific guidelines and requirements indicated in the Guide for Authors section of their target journal’s website. The same kind of adherence to conventions should be applied to journal publications, for consideration at a conference, and even when completing a class assignment.

Each publisher has particular demands when it comes to formatting and structure. Here are some common questions addressed in the journal guidelines:

• Is there a maximum or minimum word/character length?
• What are the style and formatting requirements?
• What is the appropriate abstract type?
• Are there any specific content or organization rules that apply?

There are of course other rules to consider when composing a research paper abstract. But if you follow the stated rules the first time you submit your manuscript, you can avoid your work being thrown in the “circular file” right off the bat.

Identify Your Target Readership

The main purpose of your abstract is to lead researchers to the full text of your research paper. In scientific journals, abstracts let readers decide whether the research discussed is relevant to their own interests or study. Abstracts also help readers understand your main argument quickly. Consider these questions as you write your abstract:

• Are other academics in your field the main target of your study?
• Will your study perhaps be useful to members of the general public?
• Do your study results include the wider implications presented in the abstract?

Outlining and Writing Your Abstract

What to include in an abstract.

Just as your  research paper title  should cover as much ground as possible in a few short words, your abstract must cover  all  parts of your study in order to fully explain your paper and research. Because it must accomplish this task in the space of only a few hundred words, it is important not to include ambiguous references or phrases that will confuse the reader or mislead them about the content and objectives of your research. Follow these  dos  and  don’ts  when it comes to what kind of writing to include:

• Avoid acronyms or abbreviations since these will need to be explained in order to make sense to the reader, which takes up valuable abstract space. Instead, explain these terms in the Introduction section of the main text.
• Only use references to people or other works if they are well-known. Otherwise, avoid referencing anything outside of your study in the abstract.
• Never include tables, figures, sources, or long quotations in your abstract; you will have plenty of time to present and refer to these in the body of your paper.

Use keywords in your abstract to focus your topic

A vital search tool is the research paper keywords section, which lists the most relevant terms directly underneath the abstract. Think of these keywords as the “tubes” that readers will seek and enter—via queries on databases and search engines—to ultimately land at their destination, which is your paper. Your abstract keywords should thus be words that are commonly used in searches but should also be highly relevant to your work and found in the text of your abstract. Include 5 to 10 important words or short phrases central to your research in both the abstract and the keywords section.

For example, if you are writing a paper on the prevalence of obesity among lower classes that crosses international boundaries, you should include terms like “obesity,” “prevalence,” “international,” “lower classes,” and “cross-cultural.” These are terms that should net a wide array of people interested in your topic of study. Look at our nine rules for choosing keywords for your research paper if you need more input on this.

Research Paper Abstract Structure

As mentioned above, the abstract (especially the informative abstract) acts as a surrogate or synopsis of your research paper, doing almost as much work as the thousands of words that follow it in the body of the main text. In the hard sciences and most social sciences, the abstract includes the following sections and organizational schema.

Each section is quite compact—only a single sentence or two, although there is room for expansion if one element or statement is particularly interesting or compelling. As the abstract is almost always one long paragraph, the individual sections should naturally merge into one another to create a holistic effect. Use the following as a checklist to ensure that you have included all of the necessary content in your abstract.

1) Identify your purpose and motivation

So your research is about rabies in Brazilian squirrels. Why is this important? You should start your abstract by explaining why people should care about this study—why is it significant to your field and perhaps to the wider world? And what is the exact purpose of your study; what are you trying to achieve? Start by answering the following questions:

• What made you decide to do this study or project?
• Why is this study important to your field or to the lay reader?
• Why should someone read your entire article?

In summary, the first section of your abstract should include the importance of the research and its impact on related research fields or on the wider scientific domain.

2) Explain the research problem you are addressing

Stating the research problem that your study addresses is the corollary to why your specific study is important and necessary. For instance, even if the issue of “rabies in Brazilian squirrels” is important, what is the problem—the “missing piece of the puzzle”—that your study helps resolve?

You can combine the problem with the motivation section, but from a perspective of organization and clarity, it is best to separate the two. Here are some precise questions to address:

• What is your research trying to better understand or what problem is it trying to solve?
• What is the scope of your study—does it try to explain something general or specific?
• What is your central claim or argument?

3) Discuss your research approach

Your specific study approach is detailed in the Methods and Materials section .  You have already established the importance of the research, your motivation for studying this issue, and the specific problem your paper addresses. Now you need to discuss  how  you solved or made progress on this problem—how you conducted your research. If your study includes your own work or that of your team, describe that here. If in your paper you reviewed the work of others, explain this here. Did you use analytic models? A simulation? A double-blind study? A case study? You are basically showing the reader the internal engine of your research machine and how it functioned in the study. Be sure to:

• Detail your research—include methods/type of the study, your variables, and the extent of the work
• Briefly present evidence to support your claim
• Highlight your most important sources

4) Briefly summarize your results

Here you will give an overview of the outcome of your study. Avoid using too many vague qualitative terms (e.g, “very,” “small,” or “tremendous”) and try to use at least some quantitative terms (i.e., percentages, figures, numbers). Save your qualitative language for the conclusion statement. Answer questions like these:

• What did your study yield in concrete terms (e.g., trends, figures, correlation between phenomena)?
• How did your results compare to your hypothesis? Was the study successful?
• Where there any highly unexpected outcomes or were they all largely predicted?

5) State your conclusion

In the last section of your abstract, you will give a statement about the implications and  limitations of the study . Be sure to connect this statement closely to your results and not the area of study in general. Are the results of this study going to shake up the scientific world? Will they impact how people see “Brazilian squirrels”? Or are the implications minor? Try not to boast about your study or present its impact as  too  far-reaching, as researchers and journals will tend to be skeptical of bold claims in scientific papers. Answer one of these questions:

• What are the exact effects of these results on my field? On the wider world?
• What other kind of study would yield further solutions to problems?
• What other information is needed to expand knowledge in this area?

After Completing the First Draft of Your Abstract

Revise your abstract.

The abstract, like any piece of academic writing, should be revised before being considered complete. Check it for  grammatical and spelling errors  and make sure it is formatted properly.

Get feedback from a peer

Getting a fresh set of eyes to review your abstract is a great way to find out whether you’ve summarized your research well. Find a reader who understands research papers but is not an expert in this field or is not affiliated with your study. Ask your reader to summarize what your study is about (including all key points of each section). This should tell you if you have communicated your key points clearly.

In addition to research peers, consider consulting with a professor or even a specialist or generalist writing center consultant about your abstract. Use any resource that helps you see your work from another perspective.

Consider getting professional editing and proofreading

While peer feedback is quite important to ensure the effectiveness of your abstract content, it may be a good idea to find an academic editor  to fix mistakes in grammar, spelling, mechanics, style, or formatting. The presence of basic errors in the abstract may not affect your content, but it might dissuade someone from reading your entire study. Wordvice provides English editing services that both correct objective errors and enhance the readability and impact of your work.

Additional Abstract Rules and Guidelines

Write your abstract after completing your paper.

Although the abstract goes at the beginning of your manuscript, it does not merely introduce your research topic (that is the job of the title), but rather summarizes your entire paper. Writing the abstract last will ensure that it is complete and consistent with the findings and statements in your paper.

Keep your content in the correct order

Both questions and answers should be organized in a standard and familiar way to make the content easier for readers to absorb. Ideally, it should mimic the overall format of your essay and the classic “introduction,” “body,” and “conclusion” form, even if the parts are not neatly divided as such.

Write the abstract from scratch

Because the abstract is a self-contained piece of writing viewed separately from the body of the paper, you should write it separately as well. Never copy and paste direct quotes from the paper and avoid paraphrasing sentences in the paper. Using new vocabulary and phrases will keep your abstract interesting and free of redundancies while conserving space.

Don’t include too many details in the abstract

Again, the density of your abstract makes it incompatible with including specific points other than possibly names or locations. You can make references to terms, but do not explain or define them in the abstract. Try to strike a balance between being specific to your study and presenting a relatively broad overview of your work.

Wordvice Resources

If you think your abstract is fine now but you need input on abstract writing or require English editing services (including paper editing ), then head over to the Wordvice academic resources page, where you will find many more articles, for example on writing the Results , Methods , and Discussion sections of your manuscript, on choosing a title for your paper , or on how to finalize your journal submission with a strong cover letter .    

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

How to Write an APA Abstract

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Emily is a board-certified science editor who has worked with top digital publishing brands like Voices for Biodiversity, Study.com, GoodTherapy, Vox, and Verywell.

Verywell / Nusha Ashjaee 

• Writing Your Abstract
• How to Use Keywords

An APA abstract is a concise but comprehensive summary of a scientific paper. It is typically a paragraph long, or about 150 to 250 words. The goal of the abstract is to provide the reader with a brief and accurate idea of what a paper is about.

The APA abstract should appear on a separate page immediately after the title page and before the main content of your paper. While professional papers that appear in scientific journals and other publications require an APA abstract, they may not be required for student papers. However, you should always check with your instructor for specific requirements.

What Is APA Format?

APA format is the official style of the American Psychological Association. It is used in writing for psychology and other social sciences. These style guidelines specify different aspects of a document's presentation and layout, including how pages are structured, how references are organized, and how sources are cited.

This article explains how to create an abstract in APA format for your psychology papers or other types of scientific writing. It covers the basic rules you should follow as well as specific guidelines for writing abstracts for experimental reports, literature reviews, and other articles.

What Is an Abstract in APA Format?

In addition to providing guidance for the general style and organization of a paper, APA format also stipulates using an abstract designed to briefly summarize the key details in a paper.

While it is sometimes overlooked or only an afterthought, an abstract is an integral part of any academic or professional paper. The abstract is a critical component of an APA-formatted paper. This brief overview summarizes what your paper contains. It should succinctly and accurately represent what your paper is about and what the reader can expect to find.

Following a few simple guidelines, you can create an abstract following the format. Done well, an abstract generates interest in your work and helps readers learn if the paper will interest them.

APA Format Abstract Basics

The abstract is the second page of a lab report or APA-format paper and should immediately follow the title page . Think of an abstract as a highly condensed summary of your entire paper.

The purpose of your abstract is to provide a brief yet thorough overview of your paper. It should function much like your title page—it should allow the person reading it to quickly determine what your paper is all about. Your abstract is the first thing that most people will read, and it is usually what informs their decision to read the rest of your paper.

The abstract is the single most important paragraph in your entire paper, according to the APA Publication Manual. A good abstract lets the reader know that your paper is worth reading.

According to the official guidelines of the American Psychological Association, an abstract should be brief but packed with information. Each sentence must be written with maximum impact in mind. To keep your abstract short, focus on including just four or five of the essential points, concepts, or findings.

An abstract must also be objective and accurate. The abstract's purpose is to report rather than provide commentary. It should accurately reflect what your paper is about. Only include information that is also included in the body of your paper.

Key Elements of an APA Abstract

Your abstract page should include:

• A running head , which is a shortened version of your title that appears in all caps at the top left of each page of your paper
• A section label , which should be the word "Abstract" centered and bolded at the top of the page
• A page number , which should be the second page of your paper (the title page should be page 1)
• A double-spaced paragraph of about 150 to 250 words
• An indented list of keywords related to your paper's content. Include the label "Keywords:" in italics and list three to five keywords that are separated by commas

How to Write an Abstract in APA Format

Before you write your abstract, you first need to write your paper in its entirety. In order to write a good abstract, you need to have a finished draft of your paper so you can summarize it accurately.

While the abstract will be at the beginning of your paper, it should be the last section you write.

Once you have completed the final draft of your psychology paper , use it as a guide for writing your abstract.

• Begin your abstract on a new page . Place your running head and page number 2 in the top right-hand corner. Center the word "Abstract" at the top of the page.
• Know your target word count . An abstract should be between 150 and 250 words. Exact word counts vary from journal to journal . If you are writing your paper for a psychology course, your professor may have specific word requirements, so be sure to ask. The abstract should be written as only one paragraph with no indentation.
• Structure the abstract in the same order as your paper . Begin with a brief summary of the introduction , and then continue on with a summary of the method , results , and discussion sections of your paper.
• Look at other abstracts in professional journals for examples of how to summarize your paper . Notice the main points that the authors chose to mention in the abstract. Use these examples as a guide when choosing the main ideas in your own paper.
• Write a rough draft of your abstract . Use the format required for your type of paper (see next sections). While you should aim for brevity, be careful not to make your summary too short. Try to write one to two sentences summarizing each section of your paper. Once you have a rough draft, you can edit for length and clarity.
• Ask a friend to read over the abstract . Sometimes, having someone look at your abstract with fresh eyes can provide perspective and help you spot possible typos and other errors.

The abstract is vital to your paper, so it should not be overlooked or treated as an afterthought. Spend time writing this section carefully to ensure maximum readability and clarity.

It is important to remember that while the abstract is the last thing you write, it is often the most read part of your paper.

Experimental Report Abstracts

The format of your abstract also depends on the type of paper you are writing. For example, an abstract summarizing an experimental paper will differ from that of a meta-analysis or case study . For an experimental report, your abstract should:

• Identify the problem . In many cases, you should begin by stating the question you sought to investigate and your hypothesis .
• Describe the participants in the study . State how many participants took part and how they were selected. For example: "In this study, 215 undergraduate student participants were randomly assigned to [the experimental condition] or [the control condition]."
• Describe the study method . For example, identify whether you used a within-subjects, between-subjects, or mixed design.
• Give the basic findings . This is essentially a brief preview of the results of your paper. 
• Provide any conclusions or implications of the study . What might your results indicate, and what directions does it point to for future research?

Literature Review Abstracts

If your paper is a meta-analysis or literature review, your abstract should:

• Describe the problem of interest . In other words, what is it that you set out to investigate in your analysis or review?
• Explain the criteria used to select the studies included in the paper . There may be many different studies devoted to your topic. Your analysis or review probably only looks at a portion of these studies. For what reason did you select these specific studies to include in your research?
• Identify the participants in the studies . Inform the reader about who the participants were in the studies. Were they college students? Older adults? How were they selected and assigned?
• Provide the main results . Again, this is essentially a quick peek at what readers will find when they read your results section. Don't try to include everything. Just provide a very brief summary of your main findings. 
• Describe any conclusions or implications . What might these results mean and what do they reveal about the body of research that exists on this particular topic?

Lab Reports and Articles

Psychology papers such as lab reports and APA format articles also often require an abstract. In these cases as well, the abstract should include all of the major elements of your paper, including an introduction, hypothesis, methods, results, and discussion.

Remember, although the abstract should be placed at the beginning of your paper (right after the title page), you will write the abstract last after you have completed a final draft of your paper.

To ensure that all of your APA formatting is correct, consider consulting a copy of the  Publication Manual of the American Psychological Association .

Keywords in an APA Abstract

After the paragraph containing the main elements of your abstract, you can also include keywords related to your paper. Such keywords are used when indexing your paper in databases and can help researchers and students locate your paper when searching for information about those topics.

Because keywords help people find your paper, it is essential to choose the right ones. The APA suggests including between three and five keywords.

You can identify keywords by thinking about what your paper is about. For example, if your paper focuses on how social media use is related to depression in teenagers, you might include the keywords: social media, mood, depression, adolescents, social networking sites 

A Word From Verywell

The abstract may be very brief, but it is so important that the official APA style manual identifies it as the most important paragraph in your entire paper. Careful attention to detail can ensure that your abstract does a good job representing the contents of your paper. If possible, take your paper to your school's writing lab for assistance.

Nagda S. How to write a scientific abstract. J Indian Prosthodont Soc. 2013;13(3):382–383. doi:10.1007/s13191-013-0299-x

Kumar A. Writing an abstract: Revealing the essence with eloquence .  J Indian Soc Periodontol . 2022;26(1):1-2. doi:10.4103/jisp.jisp_634_21

American Psychological Association. APA Style Journal Article Reporting Standards: Reporting Standards for Studies With an Experimental Manipulation .

American Psychological Association. APA Style Journal Article Reporting Standards: Quantitative Meta-Analysis Article Reporting Standards .

Tullu MS. Writing the title and abstract for a research paper: Being concise, precise, and meticulous is the key .  Saudi J Anaesth . 2019;13(Suppl 1):S12-S17. doi:10.4103/sja.SJA_685_18

American Psychological Association. Publication Manual of the American Psychological Association (7th ed.). American Psychological Association; 2019.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Magnum Proofreading Services

• Jake Magnum
• Jan 2, 2021

Writing an Abstract for a Research Paper: Guidelines, Examples, and Templates

There are six steps to writing a standard abstract. (1) Begin with a broad statement about your topic. Then, (2) state the problem or knowledge gap related to this topic that your study explores. After that, (3) describe what specific aspect of this problem you investigated, and (4) briefly explain how you went about doing this. After that, (5) describe the most meaningful outcome(s) of your study. Finally, (6) close your abstract by explaining the broad implication(s) of your findings.

In this article, I present step-by-step guidelines for writing an abstract for an academic paper. These guidelines are fo llowed by an example of a full abstract that follows these guidelines and a few fill-in-the-blank templates that you can use to write your own abstract.

Guidelines for Writing an Abstract

The basic structure of an abstract is illustrated below.

A standard abstract starts with a very general statement and becomes more specific with each sentence that follows until once again making a broad statement about the study’s implications at the end. Altogether, a standard abstract has six functions, which are described in detail below.

Start by making a broad statement about your topic.

The first sentence of your abstract should briefly describe a problem that is of interest to your readers. When writing this first sentence, you should think about who comprises your target audience and use terms that will appeal to this audience. If your opening sentence is too broad, it might lose the attention of potential readers because they will not know if your study is relevant to them.

Too broad : Maintaining an ideal workplace environment has a positive effect on employees.

The sentence above is so broad that it will not grab the reader’s attention. While it gives the reader some idea of the area of study, it doesn’t provide any details about the author’s topic within their research area. This can be fixed by inserting some keywords related to the topic (these are underlined in the revised example below).

Improved : Keeping the workplace environment at an ideal temperature positively affects the overall health of employees.

The revised sentence is much better, as it expresses two points about the research topic—namely, (i) what aspect of workplace environment was studied, (ii) what aspect of employees was observed. The mention of these aspects of the research will draw the attention of readers who are interested in them.

Describe the general problem that your paper addresses.

After describing your topic in the first sentence, you can then explain what aspect of this topic has motivated your research. Often, authors use this part of the abstract to describe the research gap that they identified and aimed to fill. These types of sentences are often characterized by the use of words such as “however,” “although,” “despite,” and so on.

However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking.

The above example is typical of a sentence describing the problem that a study intends to tackle. The author has noticed that there is a gap in the research, and they briefly explain this gap here.

Although it has been established that quantity and quality of sleep can affect different types of task performance and personal health, the interactions between sleep habits and workplace behaviors have received very little attention.

The example above illustrates a case in which the author has accomplished two tasks with one sentence. The first part of the sentence (up until the comma) mentions the general topic that the research fits into, while the second part (after the comma) describes the general problem that the research addresses.

Express the specific problem investigated in your paper.

After describing the general problem that motivated your research, the next sentence should express the specific aspect of the problem that you investigated. Sentences of this type are often indicated by the use of phrases like “the purpose of this research is to,” “this paper is intended to,” or “this work aims to.”

Uninformative : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to provide new insights into the relationship between workplace bullying and absenteeism .

The second sentence in the above example is a mere rewording of the first sentence. As such, it adds nothing to the abstract. The second sentence should be more specific than the preceding one.

Improved : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to define various subtypes of workplace bullying and determine which subtypes tend to lead to absenteeism .

The second sentence of this passage is much more informative than in the previous example. This sentence lets the reader know exactly what they can expect from the full research article.

Explain how you attempted to resolve your study’s specific problem.

In this part of your abstract, you should attempt to describe your study’s methodology in one or two sentences. As such, you must be sure to include only the most important information about your method. At the same time, you must also be careful not to be too vague.

Too vague : We conducted multiple tests to examine changes in various factors related to well-being.

This description of the methodology is too vague. Instead of merely mentioning “tests” and “factors,” the author should note which specific tests were run and which factors were assessed.

Improved : Using data from BHIP completers, we conducted multiple one-way multivariate analyses of variance and follow-up univariate t-tests to examine changes in physical and mental health, stress, energy levels, social satisfaction, self-efficacy, and quality of life.

This sentence is very well-written. It packs a lot of specific information about the method into a single sentence. Also, it does not describe more details than are needed for an abstract.

Briefly tell the reader what you found by carrying out your study.

This is the most important part of the abstract—the other sentences in the abstract are there to explain why this one is relevant. When writing this sentence, imagine that someone has asked you, “What did you find in your research?” and that you need to answer them in one or two sentences.

Too vague : Consistently poor sleepers had more health risks and medical conditions than consistently optimal sleepers.

This sentence is okay, but it would be helpful to let the reader know which health risks and medical conditions were related to poor sleeping habits.

Improved : Consistently poor sleepers were more likely than consistently optimal sleepers to suffer from chronic abdominal pain, and they were at a higher risk for diabetes and heart disease.

This sentence is better, as the specific health conditions are named.

Finally, describe the major implication(s) of your study.

Most abstracts end with a short sentence that explains the main takeaway(s) that you want your audience to gain from reading your paper. Often, this sentence is addressed to people in power (e.g., employers, policymakers), and it recommends a course of action that such people should take based on the results.

Too broad : Employers may wish to make use of strategies that increase employee health.

This sentence is too broad to be useful. It does not give employers a starting point to implement a change.

Improved : Employers may wish to incorporate sleep education initiatives as part of their overall health and wellness strategies.

This sentence is better than the original, as it provides employers with a starting point—specifically, it invites employers to look up information on sleep education programs.

Abstract Example

The abstract produced here is from a paper published in Electronic Commerce Research and Applications . I have made slight alterations to the abstract so that this example fits the guidelines given in this article.

(1) Gamification can strengthen enjoyment and productivity in the workplace. (2) Despite this, research on gamification in the work context is still limited. (3) In this study, we investigated the effect of gamification on the workplace enjoyment and productivity of employees by comparing employees with leadership responsibilities to those without leadership responsibilities. (4) Work-related tasks were gamified using the habit-tracking game Habitica, and data from 114 employees were gathered using an online survey. (5) The results illustrated that employees without leadership responsibilities used work gamification as a trigger for self-motivation, whereas employees with leadership responsibilities used it to improve their health. (6) Work gamification positively affected work enjoyment for both types of employees and positively affected productivity for employees with leadership responsibilities. (7) Our results underline the importance of taking work-related variables into account when researching work gamification.

In Sentence (1), the author makes a broad statement about their topic. Notice how the nouns used (“gamification,” “enjoyment,” “productivity”) are quite general while still indicating the focus of the paper. The author uses Sentence (2) to very briefly state the problem that the research will address.

In Sentence (3), the author explains what specific aspects of the problem mentioned in Sentence (2) will be explored in the present work. Notice that the mention of leadership responsibilities makes Sentence (3) more specific than Sentence (2). Sentence (4) gets even more specific, naming the specific tools used to gather data and the number of participants.

Sentences (5) and (6) are similar, with each sentence describing one of the study’s main findings. Then, suddenly, the scope of the abstract becomes quite broad again in Sentence (7), which mentions “work-related variables” instead of a specific variable and “researching” instead of a specific kind of research.

Abstract Templates

Copy and paste any of the paragraphs below into a word processor. Then insert the appropriate information to produce an abstract for your research paper.

Template #1

Researchers have established that [Make a broad statement about your area of research.] . However, [Describe the knowledge gap that your paper addresses.] . The goal of this paper is to [Describe the purpose of your paper.] . The achieve this goal, we [Briefly explain your methodology.] . We found that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #2

It is well-understood that [Make a broad statement about your area of research.] . Despite this, [Describe the knowledge gap that your paper addresses.] . The current research aims to [Describe the purpose of your paper.] . To accomplish this, we [Briefly explain your methodology.] . It was discovered that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #3

Extensive research indicates that [Make a broad statement about your area of research.] . Nevertheless, [Describe the knowledge gap that your paper addresses.] . The present work is intended to [Describe the purpose of your paper.] . To this end, we [Briefly explain your methodology.] . The results revealed that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

• How to Write an Abstract

Related Posts

How to Write a Research Paper in English: A Guide for Non-native Speakers

How to Write an Abstract Quickly

Using the Present Tense and Past Tense When Writing an Abstract

How to Write an Abstract

• Research Process

Abstracts are the first thing people read when they come across your manuscript on online databases. It's also a deciding factor in peer reviews. Do not overlook its importance.

Updated on March 24, 2022

You've finished your entire paper. All those hours put into your research have finally paid off. Research writing can be tough .

But hold on; you're not quite finished yet. You forgot to write your abstract!

The abstract can sometimes be overlooked, but that does not mean it's unimportant. In fact, some researchers argue that the abstract is the most important part of your manuscript. It's the first thing people read when they come across your manuscript on online databases. Depending on how well written it is, it could also be the first and last thing your audience reads.

It's also what publications and journals use to determine whether they want to publish your research. Continue reading to learn how to write an abstract and how AJE can help you with your writing.

What is an abstract?

An abstract is a concise summary of the major findings in your research paper. It is usually found at the beginning of your research paper. A good abstract should be able to give the average lay reader a strong sense of the main findings within your full-text paper.

Abstracts are typically one paragraph depending on how you decide to structure it. Your target publication could have specific guidelines that determine the structure of your abstract. However, all abstracts have the commonality of being brief summaries of your longer research.

Types of abstracts

Informative abstracts.

A good informative abstract acts as a thorough summary for your full paper. It should be a structured abstract. It includes sections for the introduction, methods, results, discussion and conclusion. Each section should only be a couple sentences each. The total number of words should typically be around 250, but they can be longer, too.

Informative abstracts are typically meant for psychology, science, and engineering papers.

Components of an informative abstract

Introduction.

The introduction should only be one or two sentences. This is where you state your thesis and why your research is important. The introduction should state:

• Your paper's purpose
• The problems your research solves
• Historical references

Start writing your methods sections by explaining what you did in the experiment. Begin by setting the scene. The methods section should only be a couple sentences long.

Who/what was involved in the study?

• State who or what was used in the experiment. Include the population studied; mention any plants, animals, or humans and how many were involved.

When did the experiment take place?

• State the time frame or duration of the experiment.

Where did the experiment take place?

• Give the geographical location of the experiment.

Tips for writing the methods section

• Write your research methods section as you are doing your experimentation. Some details of your experiment could be left out if you wait too long between the experiment and writing an abstract.
• If you're having trouble structuring your methods, look at what others have done. Look at an abstract from a study in your target publication.

The results section should describe your most important findings with the data to back it up. Write this section in the past tense.

Conclusions

Your conclusions section should only be two to three sentences. In this short amount of space, you should include your interpretation of the experiment to answer the main question of your research. It should answer this question: How do these results have an effect on my area of study or the wider population?

Descriptive abstracts

A descriptive abstract is also called a limited abstract for a good reason. It's much shorter than an informative abstract - about half the size. It's a very brief summary.

It should include background information, the study's purpose, the focus of the paper, and an optional overview of the contents.

A descriptive abstract is generally used for psychology, social sciences, and humanities papers.

Tip for writing a descriptive abstract

If you're having trouble writing a descriptive abstract, take your main headings from your table of contents and write them into a paragraph format.

Critical abstracts

A critical abstract is less common than the other abstracts, but it's still worth knowing. It still includes your general findings, but it also has a section devoted to the completeness, validity, and readability of your paper. In a critical abstract, your work is compared with other studies on your subject matter.

Incorporate keywords found in your research paper

It is wise to list the key phrases and words in your research paper for Search Engine Optimization (SEO) purposes. Your key terms section helps search engines like Google and Bing direct readers and other researchers to your work. The key words section comes at the bottom of your abstract. It can be formatted as follows:

Keywords: example 1, example 2, example 3

How to format the abstract

Some researchers make their abstract a single paragraph that looks like one giant block of text. If you wish to make it easier on your readers, you can break your abstract into sections depending on your target journal's specifications.

It should immediately follow the title page. There should be no page number on the abstract page.

When should you write your abstract?

Since the abstract is the first thing your audience reads, it would make sense to write an abstract first, right?

Not exactly.

Trying to summarize your research before you've written your research paper can be incredibly challenging.

Instead, the abstract should be the last thing you write. Your research should still be fresh in your mind and you should have no problem summarizing the important findings.

There are plenty of other tips for writing your abstract as well.

Final Thoughts

Abstract writing can be difficult. Luckily, AJE's editing staff can edit your abstract . If your target journal requests a graphic abstract, our Figure Formatting team can make you one for you.

Jonny Rhein, BA

See our "Privacy Policy"

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing

How to Write an Abstract in APA

Last Updated: April 4, 2024 Fact Checked

This article was reviewed by Gerald Posner . Gerald Posner is an Author & Journalist based in Miami, Florida. With over 35 years of experience, he specializes in investigative journalism, nonfiction books, and editorials. He holds a law degree from UC College of the Law, San Francisco, and a BA in Political Science from the University of California-Berkeley. He’s the author of thirteen books, including several New York Times bestsellers, the winner of the Florida Book Award for General Nonfiction, and has been a finalist for the Pulitzer Prize in History. He was also shortlisted for the Best Business Book of 2020 by the Society for Advancing Business Editing and Writing. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 703,096 times.

A good abstract summarizes the key points of your paper without providing unnecessary detail. The APA style guide has a specific format for abstract pages, so you should be aware of this format if you are writing an APA paper. Moreover, there are other details to keep in mind concerning how to write an effective abstract. Here's what you should know.

Things You Should Know

• Write and finalize your paper before writing the abstract.
• Center the word "Abstract" at the top of the page, under the header.
• Write a 150-250 word paragraph stating the purpose, methods, scope, results, conclusions, and recommendations included in your paper.

Following the Basic Format

• A shortened version of your paper's title should be aligned to the top left of the page. The character count should not exceed 50 characters, including spaces and punctuation.
• Every letter in the page header should be capitalized.
• The page number should appear in the top right of the page. An APA abstract should be the second page of your paper, so the number "2" should appear in the corner.

• Some professors will also accept Arial font in 10-point or 12-point, but you should check with your professor before deciding to choose it.

• "Double-spaced" means that lines of texts are separated by a blank line.
• Aside from the abstract, the entire paper should also be double-spaced.

• The first letter of the word is capitalized, but the rest of the word is in lower-case.
• Do not bold, italicize, or underline the word, and do not use quotation marks. The word should stand alone and in normal font.

• Keep it short. A standard APA abstract is 150 to 250 words long and contained in a single paragraph.

• Indent as though starting a new paragraph.
• Type the word "Keywords" in italics. Capitalize the "K" and follow it with a colon.
• In normal, non-italicized font, follow the colon with three to four keywords describing the paper. These keywords should each appear in the text of the abstract. Separate them with commas.

Writing a Good Abstract

• To reflect the fact that it is a summary, your abstract should use present tense when referring to results and conclusions and past tense when referring to methods and measurements taken. Do not use future tense.
• Reread your essay before writing the abstract to refresh your memory. Pay close attention to the purpose, methods, scope, results, conclusions, and recommendations mentioned in your paper.
• Write a rough draft of your abstract without looking directly at your paper. This will help you to summarize without copying key sentences from your paper.

• An informational abstract states the purpose, methods, scope, results, conclusions, and recommendations included in your report. The abstract should highlight essential points in order to allow the reader to decide whether or not to read the rest of the report. Its total length should be about 10 percent or less of the length of the report.
• Descriptive abstracts include the purpose, methods, and scope defined in the report, but not the results, conclusions, or recommendations. These abstracts are less common to APA style and usually fall under 100 words. The purpose is the introduce the subject to the reader, essentially teasing the reader into reading the report in order to learn the results.

• For instance, ask yourself why you did the study, what you did, how you did it, what you found, and what those findings signify.
• If your paper is about a new method, ask yourself what the advantages of the new method are and how well it works.

• Even if the information is closely tied to information used in the paper, it does not belong in the abstract.
• Note that you can and should use different wording in your abstract. The information should be the same as the information in your paper, but the way that information is phrased should differ.

• Avoid phrases like, "This paper will look at..." Since the abstract is so short, you should cut straight to the facts and details of your paper instead of spending effort explaining their connection to your paper.
• Do not rephrase or repeat the title since the abstract is almost always read along with the title.
• The abstract should be complete on its own since it is often read without the rest of the paper.

• You can and should state your findings, but do not attempt to justify them. The paper itself should be used to justify your findings and provide additional support, not the abstract.

• You should also stick with active verbs more often than passive verbs.
• For instance, the strongest statement for an abstract would be, "research shows." Avoid using phrases like "I researched" or "it was researched."

• Also avoid trade names and symbols.

Sample Abstracts

Community Q&A

• If you are writing a short APA paper for a professor and the instructions do not specifically call for an abstract, ask the professor to verify that he or she actually wants one. While APA style officially promotes the use of abstracts for all papers, many professors will allow or even prefer that you skip the abstract if the assignment only calls for a 1- to 2-page paper. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/general_format.html
• ↑ https://apastyle.apa.org/instructional-aids/abstract-keywords-guide.pdf
• ↑ https://morningside.libguides.com/APA7/abstracts
• ↑ https://writingcenter.unc.edu/tips-and-tools/abstracts/
• ↑ https://www.simplypsychology.org/abstract.html

About This Article

To write an abstract in APA format, start by writing your paper first. After your paper is done, go back and reread what you've written to identify your purpose, methods, scope, results, and conclusions. State these clearly in your abstract, starting with a broad declaration of your topic, like "This paper explores the role of gender on career ambitions" and then providing more specific information about what is covered in your paper. As you write, use present tense and avoid using first person pronouns like "I" or "me." To learn how to format your font and headings correctly in APA format, read on! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Whitney Simpson

Jul 4, 2016

Did this article help you?

Madelynn Champion

Jul 1, 2019

Debra Lewis

Mar 16, 2016

Lauranna Boone

Jun 11, 2017

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Don’t miss out! Sign up for

wikiHow’s newsletter

University of Missouri

• Bias Hotline: Report bias incidents

Undergraduate Research

• How to Write An Abstract

Think of your abstract or artist statement like a movie trailer: it should leave the reader eager to learn more but knowledgeable enough to grasp the scope of your work. Although abstracts and artist statements need to contain key information on your project, your title and summary should be understandable to a lay audience.

Please remember that you can seek assistance with any of your writing needs at the MU Writing Center . Their tutors work with students from all disciplines on a wide variety of documents. And they are specially trained to use the Abstract Review Rubric that will be used on the abstracts reviewed at the Spring Forum.

Types of Research Summaries

Students should submit artist statements as their abstracts.  Artist statements should introduce to the art, performance, or creative work and include information on media and methods in creating the pieces.  The statements should also include a description of the inspiration for the work, the meaning the work signifies to the artist, the artistic influences, and any unique methods used to create the pieces.  Students are encouraged to explain the connections of the work with their inspirations or themes.  The statements should be specific to the work presented and not a general statements about the students’ artistic philosophies and approaches.  Effective artist statements should provide the viewer with information to better understand the work of the artists.  If presentations are based on previous performances, then students may include reflections on the performance experiences and audience reactions.

Abstracts should describe the nature of the project or piece (ex:  architectural images used for a charrette, fashion plates, advertising campaign story boards) and its intended purpose.  Students should describe the project or problem that they addressed and limitations and challenges that impact the design process.  Students may wish to include research conducted to provide context for the project and inform the design process. A description of the clients/end users may be included.  Information on inspirations, motivations, and influences may also be included as appropriate to the discipline and project.  A description of the project outcome should be included.

Abstracts should include a short introduction or background to put the research into context; purpose of the research project; a problem statement or thesis; a brief description of materials, methods, or subjects (as appropriate for the discipline); results and analysis; conclusions and implications; and recommendations.  For research projects still in progress at the time of abstract submission, students may opt to indicate that results and conclusions will be presented [at the Forum].

Tips for writing a clear and concise abstract

The title of your abstract/statement/poster should include some language that the lay person can understand.   When someone reads your title they should have SOME idea of the nature of your work and your discipline.

Ask a peer unfamiliar with your research to read your abstract. If they’re confused by it, others will be too.

Keep it short and sweet.

• Interesting eye-catching title
• Introduction: 1-3 sentences
• What you did: 1 sentence
• Why you did it: 1 sentence
• How you did it: 1 sentence
• Results or when they are expected: 2 sentences
• Conclusion: 1-3 sentences

Ideas to Address:

• The big picture your project helps tackle
• The problem motivating your work on this particular project
• General methods you used
• Results and/or conclusions
• The next steps for the project

Things to Avoid:

• A long and confusing title
• Jargon or complicated industry terms
• Long description of methods/procedures
• Exaggerating your results
• Exceeding the allowable word limit
• Forgetting to tell people why to care
• References that keep the abstract from being a “stand alone” document
• Being boring, confusing, or unintelligible!

Artist Statement

The artist statement should be an introduction to the art and include information on media and methods in creating the piece(s).  It should include a description of the inspiration for the work, what the work signifies to the artist, the artistic influences, and any unique methods used to create the work.  Students are encouraged to explain the connections of the work with their inspiration or theme.  The artist statement (up to 300 words) should be written in plain language to invite viewers to learn more about the artist’s work and make their own interpretations.  The statement should be specific to the piece(s) that will be on display, and not a general statement about the student’s artistic philosophy and approach.  An effective artist statement should provide the viewer with information to better understand and experience viewing the work on display.

Research/Applied Design Abstract

The project abstract (up to 300 words) should describe the nature of the project or piece (ex:  architectural images used for a charrette, fashion plates, small scale model of a theater set) and its intended purpose.  Students should describe the project or problem that was addressed and limitations and challenges that impact the design process.  Students may wish to include research conducted to provide context for the project and inform the design process. A description of the clients/end users may be included.  Information on inspirations, motivations, and influences may also be included as appropriate to the discipline and project.

Key Considerations

• What is the problem/ big picture that your project helps to address?
• What is the appropriate background to put your project into context? What do we know? What don’t we know? (informed rationale)
• What is YOUR project? What are you seeking to answer?
• How do you DO your research? What kind of data do you collect?  How do you collect it?
• What is the experimental design? Number of subjects or tests run? (quantify if you can!)
• Provide some data (not raw, but analyzed)
• What have you found? What are your results? How do you KNOW this – how did you analyze this?
• What does this mean?
• What are the next steps? What don’t we know still?
• How does this relate (again) to the bigger picture. Who should care and why?  (what is your audience?)

More Resources

• Abstract Writing Presentation from University of Illinois – Chicago
• Sample Abstracts
• A 10-Step Guide to Make Your Research Paper More Effective
• Your Artist Statement: Explaining the Unexplainable
• How to Write an Artist Statement

Here is the Forum Abstract Review Rubric for you and your mentor to use when writing your abstract to submit to the Spring Research & Creative Achievements Forum.

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Indian J Psychiatry
• v.53(2); Apr-Jun 2011

How to write a good abstract for a scientific paper or conference presentation

Chittaranjan andrade.

Department of Psychopharmacology, National Institute of Mental Health and Neurosciences, Bangalore, Karnataka, India

Abstracts of scientific papers are sometimes poorly written, often lack important information, and occasionally convey a biased picture. This paper provides detailed suggestions, with examples, for writing the background, methods, results, and conclusions sections of a good abstract. The primary target of this paper is the young researcher; however, authors with all levels of experience may find useful ideas in the paper.

INTRODUCTION

This paper is the third in a series on manuscript writing skills, published in the Indian Journal of Psychiatry . Earlier articles offered suggestions on how to write a good case report,[ 1 ] and how to read, write, or review a paper on randomized controlled trials.[ 2 , 3 ] The present paper examines how authors may write a good abstract when preparing their manuscript for a scientific journal or conference presentation. Although the primary target of this paper is the young researcher, it is likely that authors with all levels of experience will find at least a few ideas that may be useful in their future efforts.

The abstract of a paper is the only part of the paper that is published in conference proceedings. The abstract is the only part of the paper that a potential referee sees when he is invited by an editor to review a manuscript. The abstract is the only part of the paper that readers see when they search through electronic databases such as PubMed. Finally, most readers will acknowledge, with a chuckle, that when they leaf through the hard copy of a journal, they look at only the titles of the contained papers. If a title interests them, they glance through the abstract of that paper. Only a dedicated reader will peruse the contents of the paper, and then, most often only the introduction and discussion sections. Only a reader with a very specific interest in the subject of the paper, and a need to understand it thoroughly, will read the entire paper.

Thus, for the vast majority of readers, the paper does not exist beyond its abstract. For the referees, and the few readers who wish to read beyond the abstract, the abstract sets the tone for the rest of the paper. It is therefore the duty of the author to ensure that the abstract is properly representative of the entire paper. For this, the abstract must have some general qualities. These are listed in Table 1 .

General qualities of a good abstract

SECTIONS OF AN ABSTRACT

Although some journals still publish abstracts that are written as free-flowing paragraphs, most journals require abstracts to conform to a formal structure within a word count of, usually, 200–250 words. The usual sections defined in a structured abstract are the Background, Methods, Results, and Conclusions; other headings with similar meanings may be used (eg, Introduction in place of Background or Findings in place of Results). Some journals include additional sections, such as Objectives (between Background and Methods) and Limitations (at the end of the abstract). In the rest of this paper, issues related to the contents of each section will be examined in turn.

This section should be the shortest part of the abstract and should very briefly outline the following information:

• What is already known about the subject, related to the paper in question
• What is not known about the subject and hence what the study intended to examine (or what the paper seeks to present)

In most cases, the background can be framed in just 2–3 sentences, with each sentence describing a different aspect of the information referred to above; sometimes, even a single sentence may suffice. The purpose of the background, as the word itself indicates, is to provide the reader with a background to the study, and hence to smoothly lead into a description of the methods employed in the investigation.

Some authors publish papers the abstracts of which contain a lengthy background section. There are some situations, perhaps, where this may be justified. In most cases, however, a longer background section means that less space remains for the presentation of the results. This is unfortunate because the reader is interested in the paper because of its findings, and not because of its background.

A wide variety of acceptably composed backgrounds is provided in Table 2 ; most of these have been adapted from actual papers.[ 4 – 9 ] Readers may wish to compare the content in Table 2 with the original abstracts to see how the adaptations possibly improve on the originals. Note that, in the interest of brevity, unnecessary content is avoided. For instance, in Example 1 there is no need to state “The antidepressant efficacy of desvenlafaxine (DV), a dual-acting antidepressant drug , has been established…” (the unnecessary content is italicized).

Examples of the background section of an abstract

The methods section is usually the second-longest section in the abstract. It should contain enough information to enable the reader to understand what was done, and how. Table 3 lists important questions to which the methods section should provide brief answers.

Questions regarding which information should ideally be available in the methods section of an abstract

Carelessly written methods sections lack information about important issues such as sample size, numbers of patients in different groups, doses of medications, and duration of the study. Readers have only to flip through the pages of a randomly selected journal to realize how common such carelessness is.

Table 4 presents examples of the contents of accept-ably written methods sections, modified from actual publications.[ 10 , 11 ] Readers are invited to take special note of the first sentence of each example in Table 4 ; each is packed with detail, illustrating how to convey the maximum quantity of information with maximum economy of word count.

Examples of the methods section of an abstract

The results section is the most important part of the abstract and nothing should compromise its range and quality. This is because readers who peruse an abstract do so to learn about the findings of the study. The results section should therefore be the longest part of the abstract and should contain as much detail about the findings as the journal word count permits. For example, it is bad writing to state “Response rates differed significantly between diabetic and nondiabetic patients.” A better sentence is “The response rate was higher in nondiabetic than in diabetic patients (49% vs 30%, respectively; P <0.01).”

Important information that the results should present is indicated in Table 5 . Examples of acceptably written abstracts are presented in Table 6 ; one of these has been modified from an actual publication.[ 11 ] Note that the first example is rather narrative in style, whereas the second example is packed with data.

Information that the results section of the abstract should ideally present

Examples of the results section of an abstract

CONCLUSIONS

This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcome measure; however, other important or unexpected findings should also be mentioned. It is also customary, but not essential, for the authors to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:

• The primary take-home message
• The additional findings of importance
• The perspective

Despite its necessary brevity, this section has the most impact on the average reader because readers generally trust authors and take their assertions at face value. For this reason, the conclusions should also be scrupulously honest; and authors should not claim more than their data demonstrate. Hypothetical examples of the conclusions section of an abstract are presented in Table 7 .

Examples of the conclusions section of an abstract

MISCELLANEOUS OBSERVATIONS

Citation of references anywhere within an abstract is almost invariably inappropriate. Other examples of unnecessary content in an abstract are listed in Table 8 .

Examples of unnecessary content in a abstract

It goes without saying that whatever is present in the abstract must also be present in the text. Likewise, whatever errors should not be made in the text should not appear in the abstract (eg, mistaking association for causality).

As already mentioned, the abstract is the only part of the paper that the vast majority of readers see. Therefore, it is critically important for authors to ensure that their enthusiasm or bias does not deceive the reader; unjustified speculations could be even more harmful. Misleading readers could harm the cause of science and have an adverse impact on patient care.[ 12 ] A recent study,[ 13 ] for example, concluded that venlafaxine use during the second trimester of pregnancy may increase the risk of neonates born small for gestational age. However, nowhere in the abstract did the authors mention that these conclusions were based on just 5 cases and 12 controls out of the total sample of 126 cases and 806 controls. There were several other serious limitations that rendered the authors’ conclusions tentative, at best; yet, nowhere in the abstract were these other limitations expressed.

As a parting note: Most journals provide clear instructions to authors on the formatting and contents of different parts of the manuscript. These instructions often include details on what the sections of an abstract should contain. Authors should tailor their abstracts to the specific requirements of the journal to which they plan to submit their manuscript. It could also be an excellent idea to model the abstract of the paper, sentence for sentence, on the abstract of an important paper on a similar subject and with similar methodology, published in the same journal for which the manuscript is slated.

Source of Support: Nil

Conflict of Interest: None declared.

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Welcome to the Purdue Online Writing Lab

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

The Online Writing Lab (the Purdue OWL) at Purdue University houses writing resources and instructional material, and we provide these as a free service at Purdue. Students, members of the community, and users worldwide will find information to assist with many writing projects. Teachers and trainers may use this material for in-class and out-of-class instruction.

The On-Campus and Online versions of Purdue OWL assist clients in their development as writers—no matter what their skill level—with on-campus consultations, online participation, and community engagement. The Purdue OWL serves the Purdue West Lafayette and Indianapolis campuses and coordinates with local literacy initiatives. The Purdue OWL offers global support through online reference materials and services.

Social Media

Facebook twitter.

Introductions

What this handout is about.

This handout will explain the functions of introductions, offer strategies for creating effective introductions, and provide some examples of less effective introductions to avoid.

The role of introductions

Introductions and conclusions can be the most difficult parts of papers to write. Usually when you sit down to respond to an assignment, you have at least some sense of what you want to say in the body of your paper. You might have chosen a few examples you want to use or have an idea that will help you answer the main question of your assignment; these sections, therefore, may not be as hard to write. And it’s fine to write them first! But in your final draft, these middle parts of the paper can’t just come out of thin air; they need to be introduced and concluded in a way that makes sense to your reader.

Your introduction and conclusion act as bridges that transport your readers from their own lives into the “place” of your analysis. If your readers pick up your paper about education in the autobiography of Frederick Douglass, for example, they need a transition to help them leave behind the world of Chapel Hill, television, e-mail, and The Daily Tar Heel and to help them temporarily enter the world of nineteenth-century American slavery. By providing an introduction that helps your readers make a transition between their own world and the issues you will be writing about, you give your readers the tools they need to get into your topic and care about what you are saying. Similarly, once you’ve hooked your readers with the introduction and offered evidence to prove your thesis, your conclusion can provide a bridge to help your readers make the transition back to their daily lives. (See our handout on conclusions .)

Note that what constitutes a good introduction may vary widely based on the kind of paper you are writing and the academic discipline in which you are writing it. If you are uncertain what kind of introduction is expected, ask your instructor.

Why bother writing a good introduction?

You never get a second chance to make a first impression. The opening paragraph of your paper will provide your readers with their initial impressions of your argument, your writing style, and the overall quality of your work. A vague, disorganized, error-filled, off-the-wall, or boring introduction will probably create a negative impression. On the other hand, a concise, engaging, and well-written introduction will start your readers off thinking highly of you, your analytical skills, your writing, and your paper.

Your introduction is an important road map for the rest of your paper. Your introduction conveys a lot of information to your readers. You can let them know what your topic is, why it is important, and how you plan to proceed with your discussion. In many academic disciplines, your introduction should contain a thesis that will assert your main argument. Your introduction should also give the reader a sense of the kinds of information you will use to make that argument and the general organization of the paragraphs and pages that will follow. After reading your introduction, your readers should not have any major surprises in store when they read the main body of your paper.

Ideally, your introduction will make your readers want to read your paper. The introduction should capture your readers’ interest, making them want to read the rest of your paper. Opening with a compelling story, an interesting question, or a vivid example can get your readers to see why your topic matters and serve as an invitation for them to join you for an engaging intellectual conversation (remember, though, that these strategies may not be suitable for all papers and disciplines).

Strategies for writing an effective introduction

Start by thinking about the question (or questions) you are trying to answer. Your entire essay will be a response to this question, and your introduction is the first step toward that end. Your direct answer to the assigned question will be your thesis, and your thesis will likely be included in your introduction, so it is a good idea to use the question as a jumping off point. Imagine that you are assigned the following question:

Drawing on the Narrative of the Life of Frederick Douglass , discuss the relationship between education and slavery in 19th-century America. Consider the following: How did white control of education reinforce slavery? How did Douglass and other enslaved African Americans view education while they endured slavery? And what role did education play in the acquisition of freedom? Most importantly, consider the degree to which education was or was not a major force for social change with regard to slavery.

You will probably refer back to your assignment extensively as you prepare your complete essay, and the prompt itself can also give you some clues about how to approach the introduction. Notice that it starts with a broad statement and then narrows to focus on specific questions from the book. One strategy might be to use a similar model in your own introduction—start off with a big picture sentence or two and then focus in on the details of your argument about Douglass. Of course, a different approach could also be very successful, but looking at the way the professor set up the question can sometimes give you some ideas for how you might answer it. (See our handout on understanding assignments for additional information on the hidden clues in assignments.)

Decide how general or broad your opening should be. Keep in mind that even a “big picture” opening needs to be clearly related to your topic; an opening sentence that said “Human beings, more than any other creatures on earth, are capable of learning” would be too broad for our sample assignment about slavery and education. If you have ever used Google Maps or similar programs, that experience can provide a helpful way of thinking about how broad your opening should be. Imagine that you’re researching Chapel Hill. If what you want to find out is whether Chapel Hill is at roughly the same latitude as Rome, it might make sense to hit that little “minus” sign on the online map until it has zoomed all the way out and you can see the whole globe. If you’re trying to figure out how to get from Chapel Hill to Wrightsville Beach, it might make more sense to zoom in to the level where you can see most of North Carolina (but not the rest of the world, or even the rest of the United States). And if you are looking for the intersection of Ridge Road and Manning Drive so that you can find the Writing Center’s main office, you may need to zoom all the way in. The question you are asking determines how “broad” your view should be. In the sample assignment above, the questions are probably at the “state” or “city” level of generality. When writing, you need to place your ideas in context—but that context doesn’t generally have to be as big as the whole galaxy!

Try writing your introduction last. You may think that you have to write your introduction first, but that isn’t necessarily true, and it isn’t always the most effective way to craft a good introduction. You may find that you don’t know precisely what you are going to argue at the beginning of the writing process. It is perfectly fine to start out thinking that you want to argue a particular point but wind up arguing something slightly or even dramatically different by the time you’ve written most of the paper. The writing process can be an important way to organize your ideas, think through complicated issues, refine your thoughts, and develop a sophisticated argument. However, an introduction written at the beginning of that discovery process will not necessarily reflect what you wind up with at the end. You will need to revise your paper to make sure that the introduction, all of the evidence, and the conclusion reflect the argument you intend. Sometimes it’s easiest to just write up all of your evidence first and then write the introduction last—that way you can be sure that the introduction will match the body of the paper.

Don’t be afraid to write a tentative introduction first and then change it later. Some people find that they need to write some kind of introduction in order to get the writing process started. That’s fine, but if you are one of those people, be sure to return to your initial introduction later and rewrite if necessary.

Open with something that will draw readers in. Consider these options (remembering that they may not be suitable for all kinds of papers):

• an intriguing example —for example, Douglass writes about a mistress who initially teaches him but then ceases her instruction as she learns more about slavery.
• a provocative quotation that is closely related to your argument —for example, Douglass writes that “education and slavery were incompatible with each other.” (Quotes from famous people, inspirational quotes, etc. may not work well for an academic paper; in this example, the quote is from the author himself.)
• a puzzling scenario —for example, Frederick Douglass says of slaves that “[N]othing has been left undone to cripple their intellects, darken their minds, debase their moral nature, obliterate all traces of their relationship to mankind; and yet how wonderfully they have sustained the mighty load of a most frightful bondage, under which they have been groaning for centuries!” Douglass clearly asserts that slave owners went to great lengths to destroy the mental capacities of slaves, yet his own life story proves that these efforts could be unsuccessful.
• a vivid and perhaps unexpected anecdote —for example, “Learning about slavery in the American history course at Frederick Douglass High School, students studied the work slaves did, the impact of slavery on their families, and the rules that governed their lives. We didn’t discuss education, however, until one student, Mary, raised her hand and asked, ‘But when did they go to school?’ That modern high school students could not conceive of an American childhood devoid of formal education speaks volumes about the centrality of education to American youth today and also suggests the significance of the deprivation of education in past generations.”
• a thought-provoking question —for example, given all of the freedoms that were denied enslaved individuals in the American South, why does Frederick Douglass focus his attentions so squarely on education and literacy?

Pay special attention to your first sentence. Start off on the right foot with your readers by making sure that the first sentence actually says something useful and that it does so in an interesting and polished way.

How to evaluate your introduction draft

Ask a friend to read your introduction and then tell you what they expect the paper will discuss, what kinds of evidence the paper will use, and what the tone of the paper will be. If your friend is able to predict the rest of your paper accurately, you probably have a good introduction.

Five kinds of less effective introductions

1. The placeholder introduction. When you don’t have much to say on a given topic, it is easy to create this kind of introduction. Essentially, this kind of weaker introduction contains several sentences that are vague and don’t really say much. They exist just to take up the “introduction space” in your paper. If you had something more effective to say, you would probably say it, but in the meantime this paragraph is just a place holder.

Example: Slavery was one of the greatest tragedies in American history. There were many different aspects of slavery. Each created different kinds of problems for enslaved people.

2. The restated question introduction. Restating the question can sometimes be an effective strategy, but it can be easy to stop at JUST restating the question instead of offering a more specific, interesting introduction to your paper. The professor or teaching assistant wrote your question and will be reading many essays in response to it—they do not need to read a whole paragraph that simply restates the question.

Example: The Narrative of the Life of Frederick Douglass discusses the relationship between education and slavery in 19th century America, showing how white control of education reinforced slavery and how Douglass and other enslaved African Americans viewed education while they endured. Moreover, the book discusses the role that education played in the acquisition of freedom. Education was a major force for social change with regard to slavery.

3. The Webster’s Dictionary introduction. This introduction begins by giving the dictionary definition of one or more of the words in the assigned question. Anyone can look a word up in the dictionary and copy down what Webster says. If you want to open with a discussion of an important term, it may be far more interesting for you (and your reader) if you develop your own definition of the term in the specific context of your class and assignment. You may also be able to use a definition from one of the sources you’ve been reading for class. Also recognize that the dictionary is also not a particularly authoritative work—it doesn’t take into account the context of your course and doesn’t offer particularly detailed information. If you feel that you must seek out an authority, try to find one that is very relevant and specific. Perhaps a quotation from a source reading might prove better? Dictionary introductions are also ineffective simply because they are so overused. Instructors may see a great many papers that begin in this way, greatly decreasing the dramatic impact that any one of those papers will have.

Example: Webster’s dictionary defines slavery as “the state of being a slave,” as “the practice of owning slaves,” and as “a condition of hard work and subjection.”

4. The “dawn of man” introduction. This kind of introduction generally makes broad, sweeping statements about the relevance of this topic since the beginning of time, throughout the world, etc. It is usually very general (similar to the placeholder introduction) and fails to connect to the thesis. It may employ cliches—the phrases “the dawn of man” and “throughout human history” are examples, and it’s hard to imagine a time when starting with one of these would work. Instructors often find them extremely annoying.

Example: Since the dawn of man, slavery has been a problem in human history.

5. The book report introduction. This introduction is what you had to do for your elementary school book reports. It gives the name and author of the book you are writing about, tells what the book is about, and offers other basic facts about the book. You might resort to this sort of introduction when you are trying to fill space because it’s a familiar, comfortable format. It is ineffective because it offers details that your reader probably already knows and that are irrelevant to the thesis.

Example: Frederick Douglass wrote his autobiography, Narrative of the Life of Frederick Douglass, An American Slave , in the 1840s. It was published in 1986 by Penguin Books. In it, he tells the story of his life.

And now for the conclusion…

Writing an effective introduction can be tough. Try playing around with several different options and choose the one that ends up sounding best to you!

Just as your introduction helps readers make the transition to your topic, your conclusion needs to help them return to their daily lives–but with a lasting sense of how what they have just read is useful or meaningful. Check out our handout on  conclusions for tips on ending your paper as effectively as you began it!

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Douglass, Frederick. 1995. Narrative of the Life of Frederick Douglass, an American Slave, Written by Himself . New York: Dover.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Introduction
• Conclusions
• Article Information

Kernel density plots are shown for the average across 3 independent licensed health care professional evaluators using principles of crowd evaluation. A, The overall quality metric is shown. B, The overall empathy metric is shown.

eTable 1. Sample Sensitivity Analysis

eFigure 1. Response Length Sensitivity Analysis

Data Sharing Statement

• Large Language Models Answer Medical Questions Accurately, but Can’t Match Clinicians’ Knowledge JAMA Medical News & Perspectives September 5, 2023 This Medical News article discusses new research on artificial intelligence systems such as ChatGPT and Med-PaLM. Emily Harris
• Physicians, Patients, and AI: Whose Humanity Is It, Anyway? JAMA Medical News & Perspectives October 17, 2023 In this Medical News article, Ida Sim, MD, PhD, a primary care physician and computational precision health expert at the University of California, San Francisco, discusses the ramifications of using AI technologies in patient care. Rebecca Voelker, MSJ
• How Kaiser Permanente Is Testing AI in the Clinic JAMA Medical News & Perspectives November 14, 2023 In this Medical News article, Andrew Bindman, MD, executive vice president and chief medical officer for Kaiser Permanente, discusses how AI can alert clinicians when patients are falling through the health care system’s cracks. Rebecca Voelker, MSJ; Yulin Hswen, ScD, MPH
• How AI Assistants Could Help Answer Patient Messages JAMA Medical News & Perspectives January 9, 2024 This Medical News article is an interview with John Ayers, PhD, MA, vice chief of innovation in the Division of Infectious Diseases & Global Public Health at the University of California, San Diego, the lead author of a recent study on chatbot responses to patient questions. Jennifer Abbasi; Yulin Hswen, ScD, MPH
• How Generative AI Done Right Could Help Democratize Health Care JAMA Medical News & Perspectives April 23, 2024 This Medical News article is an interview with JAMA Editor in Chief Kirsten Bibbins-Domingo and Virologist Davey Smith, head of the Division of Infectious Diseases and Global Public Health at the University of California, San Diego. Samantha Anderer; Yulin Hswen, ScD, MPH
• Hey Chatbot, Write Me an H&P JAMA Internal Medicine Perspective June 1, 2023 This Perspective envisions a world where artificial intelligence is integrated into health care. Teva D. Brender, MD
• Chatbot Confabulations Are Not Hallucinations—Reply JAMA Internal Medicine Comment & Response October 1, 2023 Teva D. Brender, MD
• Chatbot Confabulations Are Not Hallucinations JAMA Internal Medicine Comment & Response October 1, 2023 Rami Hatem, BS; Brianna Simmons, BS; Joseph E. Thornton, MD
• Machine-Made Empathy? Why Medicine Still Needs Humans—Reply JAMA Internal Medicine Comment & Response November 1, 2023 John W. Ayers, PhD, MA; Mark Dredze, PhD; Davey M. Smith, MD, MAS
• Medicine Still Needs Humans JAMA Internal Medicine Comment & Response November 1, 2023 Alfredo Vannacci, MD, PhD; Roberto Bonaiuti, MEng; Claudia Ravaldi, MD, MSc, PhD
• Why Medicine Still Needs Humans JAMA Internal Medicine Comment & Response November 1, 2023 Angelo Cadiente, BS; Jamie Chen, BS; Bryan Pilkington, PhD
• Chatbots and Modern Medicine—Fountain of Creativity or Pandora’s Box? JAMA Internal Medicine Invited Commentary June 1, 2023 Ron Li, MD; Andre Kumar, MD, MEd; Jonathan H. Chen, MD, PhD

See More About

Select your interests.

Customize your JAMA Network experience by selecting one or more topics from the list below.

• Academic Medicine
• Acid Base, Electrolytes, Fluids
• Allergy and Clinical Immunology
• American Indian or Alaska Natives
• Anesthesiology
• Anticoagulation
• Art and Images in Psychiatry
• Artificial Intelligence
• Assisted Reproduction
• Bleeding and Transfusion
• Caring for the Critically Ill Patient
• Challenges in Clinical Electrocardiography
• Climate and Health
• Climate Change
• Clinical Challenge
• Clinical Decision Support
• Clinical Implications of Basic Neuroscience
• Clinical Pharmacy and Pharmacology
• Complementary and Alternative Medicine
• Consensus Statements
• Coronavirus (COVID-19)
• Critical Care Medicine
• Cultural Competency
• Dental Medicine
• Dermatology
• Diabetes and Endocrinology
• Diagnostic Test Interpretation
• Drug Development
• Electronic Health Records
• Emergency Medicine
• End of Life, Hospice, Palliative Care
• Environmental Health
• Equity, Diversity, and Inclusion
• Facial Plastic Surgery
• Gastroenterology and Hepatology
• Genetics and Genomics
• Genomics and Precision Health
• Global Health
• Guide to Statistics and Methods
• Hair Disorders
• Health Care Delivery Models
• Health Care Economics, Insurance, Payment
• Health Care Quality
• Health Care Reform
• Health Care Safety
• Health Care Workforce
• Health Disparities
• Health Inequities
• Health Policy
• Health Systems Science
• History of Medicine
• Hypertension
• Images in Neurology
• Implementation Science
• Infectious Diseases
• Innovations in Health Care Delivery
• JAMA Infographic
• Law and Medicine
• Leading Change
• Less is More
• LGBTQIA Medicine
• Lifestyle Behaviors
• Medical Coding
• Medical Devices and Equipment
• Medical Education
• Medical Education and Training
• Medical Journals and Publishing
• Mobile Health and Telemedicine
• Narrative Medicine
• Neuroscience and Psychiatry
• Notable Notes
• Nutrition, Obesity, Exercise
• Obstetrics and Gynecology
• Occupational Health
• Ophthalmology
• Orthopedics
• Otolaryngology
• Pain Medicine
• Palliative Care
• Pathology and Laboratory Medicine
• Patient Care
• Patient Information
• Performance Improvement
• Performance Measures
• Perioperative Care and Consultation
• Pharmacoeconomics
• Pharmacoepidemiology
• Pharmacogenetics
• Pharmacy and Clinical Pharmacology
• Physical Medicine and Rehabilitation
• Physical Therapy
• Physician Leadership
• Population Health
• Primary Care
• Professional Well-being
• Professionalism
• Psychiatry and Behavioral Health
• Public Health
• Pulmonary Medicine
• Regulatory Agencies
• Reproductive Health
• Research, Methods, Statistics
• Resuscitation
• Rheumatology
• Risk Management
• Scientific Discovery and the Future of Medicine
• Shared Decision Making and Communication
• Sleep Medicine
• Sports Medicine
• Stem Cell Transplantation
• Substance Use and Addiction Medicine
• Surgical Innovation
• Surgical Pearls
• Teachable Moment
• Technology and Finance
• The Art of JAMA
• The Arts and Medicine
• The Rational Clinical Examination
• Tobacco and e-Cigarettes
• Translational Medicine
• Trauma and Injury
• Treatment Adherence
• Ultrasonography
• Users' Guide to the Medical Literature
• Vaccination
• Venous Thromboembolism
• Veterans Health
• Women's Health
• Workflow and Process
• Wound Care, Infection, Healing

Others Also Liked

• Download PDF
• X Facebook More LinkedIn

Ayers JW , Poliak A , Dredze M, et al. Comparing Physician and Artificial Intelligence Chatbot Responses to Patient Questions Posted to a Public Social Media Forum. JAMA Intern Med. 2023;183(6):589–596. doi:10.1001/jamainternmed.2023.1838

Manage citations:

© 2024

• Permissions

Comparing Physician and Artificial Intelligence Chatbot Responses to Patient Questions Posted to a Public Social Media Forum

• 1 Qualcomm Institute, University of California San Diego, La Jolla
• 2 Division of Infectious Diseases and Global Public Health, Department of Medicine, University of California San Diego, La Jolla
• 3 Department of Computer Science, Bryn Mawr College, Bryn Mawr, Pennsylvania
• 4 Department of Computer Science, Johns Hopkins University, Baltimore, Maryland
• 5 Herbert Wertheim School of Public Health and Human Longevity Science, University of California San Diego, La Jolla
• 6 Human Longevity, La Jolla, California
• 7 Naval Health Research Center, Navy, San Diego, California
• 8 Division of Blood and Marrow Transplantation, Department of Medicine, University of California San Diego, La Jolla
• 9 Moores Cancer Center, University of California San Diego, La Jolla
• 10 Department of Biomedical Informatics, University of California San Diego, La Jolla
• 11 Altman Clinical Translational Research Institute, University of California San Diego, La Jolla
• Invited Commentary Chatbots and Modern Medicine—Fountain of Creativity or Pandora’s Box? Ron Li, MD; Andre Kumar, MD, MEd; Jonathan H. Chen, MD, PhD JAMA Internal Medicine
• Medical News & Perspectives Large Language Models Answer Medical Questions Accurately, but Can’t Match Clinicians’ Knowledge Emily Harris JAMA
• Medical News & Perspectives Physicians, Patients, and AI: Whose Humanity Is It, Anyway? Rebecca Voelker, MSJ JAMA
• Medical News & Perspectives How Kaiser Permanente Is Testing AI in the Clinic Rebecca Voelker, MSJ; Yulin Hswen, ScD, MPH JAMA
• Medical News & Perspectives How AI Assistants Could Help Answer Patient Messages Jennifer Abbasi; Yulin Hswen, ScD, MPH JAMA
• Medical News & Perspectives How Generative AI Done Right Could Help Democratize Health Care Samantha Anderer; Yulin Hswen, ScD, MPH JAMA
• Perspective Hey Chatbot, Write Me an H&P Teva D. Brender, MD JAMA Internal Medicine
• Comment & Response Chatbot Confabulations Are Not Hallucinations—Reply Teva D. Brender, MD JAMA Internal Medicine
• Comment & Response Chatbot Confabulations Are Not Hallucinations Rami Hatem, BS; Brianna Simmons, BS; Joseph E. Thornton, MD JAMA Internal Medicine
• Comment & Response Machine-Made Empathy? Why Medicine Still Needs Humans—Reply John W. Ayers, PhD, MA; Mark Dredze, PhD; Davey M. Smith, MD, MAS JAMA Internal Medicine
• Comment & Response Medicine Still Needs Humans Alfredo Vannacci, MD, PhD; Roberto Bonaiuti, MEng; Claudia Ravaldi, MD, MSc, PhD JAMA Internal Medicine
• Comment & Response Why Medicine Still Needs Humans Angelo Cadiente, BS; Jamie Chen, BS; Bryan Pilkington, PhD JAMA Internal Medicine

Question   Can an artificial intelligence chatbot assistant, provide responses to patient questions that are of comparable quality and empathy to those written by physicians?

Findings   In this cross-sectional study of 195 randomly drawn patient questions from a social media forum, a team of licensed health care professionals compared physician’s and chatbot’s responses to patient’s questions asked publicly on a public social media forum. The chatbot responses were preferred over physician responses and rated significantly higher for both quality and empathy.

Meaning   These results suggest that artificial intelligence assistants may be able to aid in drafting responses to patient questions.

Importance   The rapid expansion of virtual health care has caused a surge in patient messages concomitant with more work and burnout among health care professionals. Artificial intelligence (AI) assistants could potentially aid in creating answers to patient questions by drafting responses that could be reviewed by clinicians.

Objective   To evaluate the ability of an AI chatbot assistant (ChatGPT), released in November 2022, to provide quality and empathetic responses to patient questions.

Design, Setting, and Participants   In this cross-sectional study, a public and nonidentifiable database of questions from a public social media forum (Reddit’s r/AskDocs) was used to randomly draw 195 exchanges from October 2022 where a verified physician responded to a public question. Chatbot responses were generated by entering the original question into a fresh session (without prior questions having been asked in the session) on December 22 and 23, 2022. The original question along with anonymized and randomly ordered physician and chatbot responses were evaluated in triplicate by a team of licensed health care professionals. Evaluators chose “which response was better” and judged both “the quality of information provided” ( very poor , poor , acceptable , good , or very good ) and “the empathy or bedside manner provided” ( not empathetic , slightly empathetic , moderately empathetic , empathetic , and very empathetic ). Mean outcomes were ordered on a 1 to 5 scale and compared between chatbot and physicians.

Results   Of the 195 questions and responses, evaluators preferred chatbot responses to physician responses in 78.6% (95% CI, 75.0%-81.8%) of the 585 evaluations. Mean (IQR) physician responses were significantly shorter than chatbot responses (52 [17-62] words vs 211 [168-245] words; t  = 25.4; P  < .001). Chatbot responses were rated of significantly higher quality than physician responses ( t  = 13.3; P  < .001). The proportion of responses rated as good or very good quality (≥ 4), for instance, was higher for chatbot than physicians (chatbot: 78.5%, 95% CI, 72.3%-84.1%; physicians: 22.1%, 95% CI, 16.4%-28.2%;). This amounted to 3.6 times higher prevalence of good or very good quality responses for the chatbot. Chatbot responses were also rated significantly more empathetic than physician responses ( t  = 18.9; P  < .001). The proportion of responses rated empathetic or very empathetic (≥4) was higher for chatbot than for physicians (physicians: 4.6%, 95% CI, 2.1%-7.7%; chatbot: 45.1%, 95% CI, 38.5%-51.8%; physicians: 4.6%, 95% CI, 2.1%-7.7%). This amounted to 9.8 times higher prevalence of empathetic or very empathetic responses for the chatbot.

Conclusions   In this cross-sectional study, a chatbot generated quality and empathetic responses to patient questions posed in an online forum. Further exploration of this technology is warranted in clinical settings, such as using chatbot to draft responses that physicians could then edit. Randomized trials could assess further if using AI assistants might improve responses, lower clinician burnout, and improve patient outcomes.

The COVID-19 pandemic hastened the adoption of virtual health care, 1 concomitant with a 1.6-fold increase in electronic patient messages, with each message adding 2.3 minutes of work in the electronic health record and more after-hours work. 2 Additional messaging volume predicts increased burnout for clinicians 3 with 62% of physicians, a record high, reporting at least 1 burnout symptom. 4 More messages also makes it more likely that patients’ messages will go unanswered or get unhelpful responses.

Some patient messages are unsolicited questions seeking medical advice, which also take more skill and time to answer than generic messages (eg, scheduling an appointment, accessing test results). Current approaches to decreasing these message burdens include limiting notifications, billing for responses, or delegating responses to less trained support staff. 5 Unfortunately, these strategies can limit access to high-quality health care. For instance, when patients were told they might be billed for messaging, they sent fewer messages and had shorter back-and-forth exchanges with clinicians. 6 Artificial intelligence (AI) assistants are an unexplored resource for addressing the burden of messages. While some proprietary AI assistants show promise, 7 some public tools have failed to recognize even basic health concepts. 8 , 9

ChatGPT 10 represents a new generation of AI technologies driven by advances in large language models. 11 ChatGPT reached 100 million users within 64 days of its November 30, 2022 release and is widely recognized for its ability to write near-human-quality text on a wide range of topics. 12 The system was not developed to provide health care, and its ability to help address patient questions is unexplored. 13 We tested ChatGPT’s ability to respond with high-quality and empathetic answers to patients’ health care questions, by comparing the chatbot responses with physicians’ responses to questions posted on a public social media forum.

Studying patient questions from health care systems using a chatbot was not possible in this cross-sectional study because, at the time, the AI was not compliant with the Health Insurance Portability and Accountability Act of 1996 (HIPAA) regulations. Deidentifying patient messages by removing unique information to make them HIPAA compliant could change the content enough to alter patient questions and affect the chatbot responses. Additionally, open science requires public data to enable research to build on and critique prior research. 14 Lastly, media reports suggest that physicians are already integrating chatbots into their practices without evidence. For reasons of need, practicality, and to empower the development of a rapidly available and shareable database of patient questions, we collected public and patient questions and physician responses posted to an online social media forum, Reddit’s r/AskDocs. 15

The online forum, r/AskDocs, is a subreddit with approximately 474 000 members where users can post medical questions and verified health care professional volunteers submit answers. 15 While anyone can respond to a question, subreddit moderators verify health care professionals’ credentials and responses display the respondent’s level of credential next to their response (eg, physician) and flag a question when it has already been answered. Background and use cases for data in this online forum are described by Nobles et al. 16

All analyses adhered to Reddit’s terms and conditions 17 and were determined by the University of California, San Diego, human research protections program to be exempt. Informed consent was not required because the data were public and did not contain identifiable information (45 CFR §46). Direct quotes from posts were summarized to protect patient’s identities. 18 Actual quotes were used to obtain the chatbot responses.

Our study’s target sample was 200, assuming 80% power to detect a 10 percentage point difference between physician and chatbot responses (45% vs 55%). The analytical sample ultimately contained 195 randomly drawn exchanges, ie, a unique member’s question and unique physician’s answer, during October 2022. The original question, including the title and text, was retained for analysis, and the physician response was retained as a benchmark response. Only physician responses were studied because we expected that physicians’ responses are generally superior to those of other health care professionals or laypersons. When a physician replied more than once, we only considered the first response, although the results were nearly identical regardless of our decision to exclude or include follow-up physician responses ( see eTable 1 in Supplement 1 ). On December 22 and 23, 2022, the original full text of the question was put into a fresh chatbot session, in which the session was free of prior questions asked that could bias the results (version GPT-3.5, OpenAI), and the chatbot response was saved.

The original question, physician response, and chatbot response were reviewed by 3 members of a team of licensed health care professionals working in pediatrics, geriatrics, internal medicine, oncology, infectious disease, and preventive medicine (J.B.K., D.J.F., A.M.G., M.H., D.M.S.). The evaluators were shown the entire patient’s question, the physician’s response, and chatbot response. Responses were randomly ordered, stripped of revealing information (eg, statements such as “I’m an artificial intelligence”), and labeled response 1 or response 2 to blind evaluators to the identity of the responders. The evaluators were instructed to read the entire patient question and both responses before answering questions about the interaction. First, evaluators were asked “which response [was] better” (ie, response 1 or response 2). Then, using Likert scales, evaluators judged both “the quality of information provided” ( very poor , poor , acceptable , good , or very good ) and “the empathy or bedside manner provided” ( not empathetic , slightly empathetic , moderately empathetic , empathetic , and very empathetic ) of responses. Response options were translated into a 1 to 5 scale, where higher values indicated greater quality or empathy.

We relied on a crowd (or ensemble) scoring strategy, 19 where scores were averaged across evaluators for each exchange studied. This method is used when there is no ground truth in the outcome being studied, and the evaluated outcomes themselves are inherently subjective (eg, judging figure skating, National Institutes of Health grants, concept discovery). As a result, the mean score reflects evaluator consensus, and disagreements (or inherent ambiguity, uncertainty) between evaluators is reflected in the score variance (eg, the CIs will, in part, be conditional on evaluator agreement). 20

We compared the number of words in physician and chatbot responses and reported the percentage of responses for which chatbot was preferred. Using 2-tailed t tests, we compared mean quality and empathy scores of physician responses with chatbot responses. Furthermore, we compared rates of responses above or below important thresholds, such as less than adequate , and computed prevalence ratios comparing the chatbot to physician responses. The significance threshold used was P  < .05. All statistical analyses were performed in R statistical software, version 4.0.2 (R Project for Statistical Computing).

We also reported the Pearson correlation between quality and empathy scores. Assuming that in-clinic patient questions may be longer than those posted on the online forum, we also assessed the extent to which subsetting the data into longer replies authored by physicians (including those above the median or 75th percentile length) changed evaluator preferences and the quality or empathy ratings relative to the chatbot responses.

The sample contained 195 randomly drawn exchanges with a unique member-patient’s question and unique physician’s answer. The mean (IQR) length of patient questions in words averaged 180 (94-223). Mean (IQR) physician responses were significantly shorter than the chatbot responses (52 [17-62] words vs 211 [168-245] words; t  = 25.4; P  < .001). A total of 182 (94%) of these exchanges consisted of a single message and only a single response from a physician. A remaining 13 (6%) exchanges consisted of a single message but with 2 separate physician responses. Second responses appeared incidental (eg, an additional response was given when a post had already been answered) (eTable 1 in Supplement 1 ).

The evaluators preferred the chatbot response to the physician responses 78.6% (95% CI, 75.0%-81.8%) of the 585 evaluations. Summaries of example questions and the corresponding physician and chatbot responses are shown in the Table .

Evaluators also rated chatbot responses significantly higher quality than physician responses ( t  = 13.3; P  < .001). The mean rating for chatbot responses was better than good (4.13; 95% CI, 4.05-4.20), while on average, physicians’ responses were rated 21% lower, corresponding to an acceptable response (3.26; 95% CI, 3.15-3.37) ( Figure ). The proportion of responses rated less than acceptable quality (<3) was higher for physician responses than for chatbot (physicians: 27.2%; 95% CI, 21.0%-33.3%; chatbot: 2.6%; 95% CI, 0.5%-5.1%). This amounted to 10.6 times higher prevalence of less than acceptable quality responses for physicians. Conversely, the proportion of responses rated good or very good quality was higher for chatbot than physicians (physicians: 22.1%; 95% CI, 16.4%-28.2%; chatbot: 78.5%; 95% CI, 72.3%-84.1%). This amounted to 3.6 times higher prevalence of good or very good responses for the chatbot.

Chatbot responses (3.65; 95% CI, 3.55-3.75) were rated significantly more empathetic ( t  = 18.9; P  < .001) than physician responses (2.15; 95% CI, 2.03-2.27). Specifically, physician responses were 41% less empathetic than chatbot responses, which generally equated to physician responses being slightly empathetic and chatbot being empathetic . Further, the proportion of responses rated less than slightly empathetic (<3) was higher for physicians than for chatbot (physicians: 80.5%; 95% CI, 74.4%-85.6%; chatbot: 14.9%; 95% CI, 9.7-20.0). This amounted to 5.4 times higher prevalence of less than slightly empathetic responses for physicians. The proportion of responses rated empathetic or very empathetic was higher for chatbot than for physicians (physicians: 4.6%; 95% CI, 2.1%-7.7%; chatbot: 45.1%; 95% CI, 38.5%-51.8%). This amounted to 9.8 times higher prevalence of empathetic or very empathetic responses for the chatbot.

The Pearson correlation coefficient between quality and empathy scores of responses authored by physicians was r  = 0.59. The correlation coefficient between quality and empathy scores of responses generated by the chatbot was r  = 0.32. A sensitivity analysis showed longer physician responses were preferred at higher rates, scored higher for empathy and quality, but remained significantly below chatbot scores (eFigure in Supplement 1 ). For instance, among the subset of physician responses longer than the median length, evaluators preferred the response of chatbot to physicians in 71.4% (95% CI, 66.3%-76.9%) of evaluations and preferred the response of chatbot to physician responses in the top 75th percentile of length 62.0% (95% CI, 54.0-69.3) of evaluations.

In this cross-sectional study within the context of patient questions in a public online forum, chatbot responses were longer than physician responses, and the study’s health care professional evaluators preferred chatbot-generated responses over physician responses 4 to 1. Additionally, chatbot responses were rated significantly higher for both quality and empathy, even when compared with the longest physician-authored responses.

We do not know how chatbots will perform responding to patient questions in a clinical setting, yet the present study should motivate research into the adoption of AI assistants for messaging, despite being previously overlooked. 5 For instance, as tested, chatbots could assist clinicians when messaging with patients, by drafting a message based on a patient’s query for physicians or support staff to edit. This approach fits into current message response strategies, where teams of clinicians often rely on canned responses or have support staff draft replies. Such an AI-assisted approach could unlock untapped productivity so that clinical staff can use the time-savings for more complex tasks, resulting in more consistent responses and helping staff improve their overall communication skills by reviewing and modifying AI-written drafts.

In addition to improving workflow, investments into AI assistant messaging could affect patient outcomes. If more patients’ questions are answered quickly, with empathy, and to a high standard, it might reduce unnecessary clinical visits, freeing up resources for those who need them. 21 Moreover, messaging is a critical resource for fostering patient equity, where individuals who have mobility limitations, work irregular hours, or fear medical bills, are potentially more likely to turn to messaging. 22 High-quality responses might also improve patient outcomes. 23 For some patients, responsive messaging may collaterally affect health behaviors, including medication adherence, compliance (eg, diet), and fewer missed appointments. Evaluating AI assistant technologies in the context of randomized clinical trials will be essential to their implementation, including studying outcomes for clinical staff, such as physician burnout, job satisfaction, and engagement.

The main study limitation was the use of the online forum question and answer exchanges. Such messages may not reflect typical patient-physician questions. For instance, we only studied responding to questions in isolation, whereas actual physicians may form answers based on established patient-physician relationships. We do not know to what extent clinician responses incorporate this level of personalization, nor have we evaluated the chatbot’s ability to provide similar details extracted from the electronic health record. Furthermore, while we demonstrate the overall quality of chatbot responses, we have not evaluated how an AI assistant will enhance clinicians responding to patient questions. The value added will vary in many ways across hospitals, specialties, and clinicians, as it augments, rather than replaces, existing processes for message-based care delivery. Another limitation is that general clinical questions are just one reason patients message their clinicians. Other common messages are requests for sooner appointments, medication refills, questions about their specific test results, their personal treatment plans, and their prognosis. Additional limitations of this study include: the summary measures of quality and empathy were not pilot tested or validated; this study’s evaluators despite being blinded to the source of a response and any initial results were also coauthors, which could have biased their assessments; the additional length of the chatbot responses could have been erroneously associated with greater empathy; and evaluators did not independently and specifically assess the physician or chatbot responses for accuracy or fabricated information, though this was considered as a subcomponent of each quality evaluation and overall response preference.

The use of a public database ensures that the present study can be replicated, expanded, and validated, especially as new AI products become available. For example, we considered only unidimensional metrics of response quality and empathy, but further research can clarify subdimensions of quality (eg, responsiveness or accuracy) and empathy (eg, communicating the patient is understood or expressing remorse for patient outcomes). Additionally, we did not evaluate patient assessments whose judgments of empathy may differ from our health care professional evaluators and who may have adverse reactions to AI assistant–generated responses. Last, using AI assistants in health care poses a range of ethical concerns 24 that need to be addressed prior to implementation of these technologies, including the need for human review of AI-generated content for accuracy and potential false or fabricated information.

While this cross-sectional study has demonstrated promising results in the use of AI assistants for patient questions, it is crucial to note that further research is necessary before any definitive conclusions can be made regarding their potential effect in clinical settings. Despite the limitations of this study and the frequent overhyping of new technologies, 25 , 26 studying the addition of AI assistants to patient messaging workflows holds promise with the potential to improve both clinician and patient outcomes.

Accepted for Publication: February 28, 2023.

Published Online: April 28, 2023. doi:10.1001/jamainternmed.2023.1838

Correction: This article was corrected on May 8, 2023, to clarify in 2 instances that chatbots cannot author responses or be considered authors, rather they are generating responses and are considered responders, and to clarify that though accuracy of responses were not specifically and independently evaluated in the study, this was considered as a subcomponent of the quality evaluations and overall preferences of the evaluators.

Corresponding Author: John W. Ayers, PhD, MA, Qualcomm Institute, University of California San Diego, La Jolla, CA ( [email protected] ).

Author Contributions: Dr Ayers had full access to all of the data in the study and takes responsibility for the integrity of the data and the accuracy of the data analysis.

Concept and design: Ayers, Poliak, Dredze, Leas, Faix, Longhurst, Smith.

Acquisition, analysis, or interpretation of data: Ayers, Poliak, Leas, Zhu, Kelley, Faix, Goodman, Longhurst, Hogarth, Smith.

Drafting of the manuscript: Ayers, Poliak, Dredze, Leas, Zhu, Kelley, Longhurst, Smith.

Critical revision of the manuscript for important intellectual content: Ayers, Poliak, Dredze, Leas, Zhu, Faix, Goodman, Longhurst, Hogarth, Smith.

Statistical analysis: Leas, Zhu, Faix.

Obtained funding: Smith.

Administrative, technical, or material support: Poliak, Dredze, Leas, Kelley, Longhurst, Smith.

Supervision: Dredze, Smith.

Conflict of Interest Disclosures: Dr Ayers reported owning equity in companies focused on data analytics, Good Analytics, of which he was CEO until June 2018, and Health Watcher. Dr Dredze reported personal fees from Bloomberg LP and Sickweather outside the submitted work and owning an equity position in Good Analytics. Dr Leas reported personal fees from Good Analytics during the conduct of the study. Dr Goodman reported personal fees from Seattle Genetics outside the submitted work. Dr Hogarth reported being an adviser for LifeLink, a health care chatbot company. Dr Longhurst reported being an adviser and equity holder at Doximity. Dr Smith reported stock options from Linear Therapies, personal fees from Arena Pharmaceuticals, Model Medicines, Pharma Holdings, Bayer Pharmaceuticals, Evidera, Signant Health, Fluxergy, Lucira, and Kiadis outside the submitted work. No other disclosures were reported.

Funding/Support: This work was supported by the Burroughs Wellcome Fund, University of California San Diego PREPARE Institute, and National Institutes of Health. Dr Leas acknowledges salary support from grant K01DA054303 from the National Institutes on Drug Abuse.

Role of the Funder/Sponsor: The funders had no role in the design and conduct of the study; collection, management, analysis, and interpretation of the data; preparation, review, or approval of the manuscript; and decision to submit the manuscript for publication.

Data Sharing Statement: See Supplement 2 .

• Register for email alerts with links to free full-text articles
• Access PDFs of free articles
• Manage your interests
• Save searches and receive search alerts

Reference Examples

More than 100 reference examples and their corresponding in-text citations are presented in the seventh edition Publication Manual . Examples of the most common works that writers cite are provided on this page; additional examples are available in the Publication Manual .

To find the reference example you need, first select a category (e.g., periodicals) and then choose the appropriate type of work (e.g., journal article ) and follow the relevant example.

When selecting a category, use the webpages and websites category only when a work does not fit better within another category. For example, a report from a government website would use the reports category, whereas a page on a government website that is not a report or other work would use the webpages and websites category.

Also note that print and electronic references are largely the same. For example, to cite both print books and ebooks, use the books and reference works category and then choose the appropriate type of work (i.e., book ) and follow the relevant example (e.g., whole authored book ).

Examples on these pages illustrate the details of reference formats. We make every attempt to show examples that are in keeping with APA Style’s guiding principles of inclusivity and bias-free language. These examples are presented out of context only to demonstrate formatting issues (e.g., which elements to italicize, where punctuation is needed, placement of parentheses). References, including these examples, are not inherently endorsements for the ideas or content of the works themselves. An author may cite a work to support a statement or an idea, to critique that work, or for many other reasons. For more examples, see our sample papers .

Reference examples are covered in the seventh edition APA Style manuals in the Publication Manual Chapter 10 and the Concise Guide Chapter 10

Related handouts

• Common Reference Examples Guide (PDF, 147KB)
• Reference Quick Guide (PDF, 225KB)

Textual Works

Textual works are covered in Sections 10.1–10.8 of the Publication Manual . The most common categories and examples are presented here. For the reviews of other works category, see Section 10.7.

• Journal Article References
• Magazine Article References
• Newspaper Article References
• Blog Post and Blog Comment References
• UpToDate Article References
• Book/Ebook References
• Diagnostic Manual References
• Children’s Book or Other Illustrated Book References
• Classroom Course Pack Material References
• Religious Work References
• Chapter in an Edited Book/Ebook References
• Dictionary Entry References
• Wikipedia Entry References
• Report by a Government Agency References
• Report with Individual Authors References
• Brochure References
• Ethics Code References
• Fact Sheet References
• ISO Standard References
• Press Release References
• White Paper References
• Conference Presentation References
• Conference Proceeding References
• Published Dissertation or Thesis References
• Unpublished Dissertation or Thesis References
• ERIC Database References
• Preprint Article References

Data and Assessments

Data sets are covered in Section 10.9 of the Publication Manual . For the software and tests categories, see Sections 10.10 and 10.11.

• Data Set References
• Toolbox References

Audiovisual Media

Audiovisual media are covered in Sections 10.12–10.14 of the Publication Manual . The most common examples are presented together here. In the manual, these examples and more are separated into categories for audiovisual, audio, and visual media.

• Artwork References
• Clip Art or Stock Image References
• Film and Television References
• Musical Score References
• Online Course or MOOC References
• Podcast References
• PowerPoint Slide or Lecture Note References
• Radio Broadcast References
• TED Talk References
• Transcript of an Audiovisual Work References
• YouTube Video References

Online Media

Online media are covered in Sections 10.15 and 10.16 of the Publication Manual . Please note that blog posts are part of the periodicals category.

• Facebook References
• Instagram References
• LinkedIn References
• Online Forum (e.g., Reddit) References
• TikTok References
• X References
• Webpage on a Website References
• Clinical Practice References
• Open Educational Resource References
• Whole Website References

Unfortunately we don't fully support your browser. If you have the option to, please upgrade to a newer version or use Mozilla Firefox , Microsoft Edge , Google Chrome , or Safari 14 or newer. If you are unable to, and need support, please send us your feedback .

We'd appreciate your feedback. Tell us what you think! opens in new tab/window

CRediT author statement

CRediT (Contributor Roles Taxonomy) was introduced with the intention of recognizing individual author contributions, reducing authorship disputes and facilitating collaboration. The idea came about following a 2012 collaborative workshop led by Harvard University and the Wellcome Trust, with input from researchers, the International Committee of Medical Journal Editors (ICMJE) and publishers, including Elsevier, represented by Cell Press.

CRediT offers authors the opportunity to share an accurate and detailed description of their diverse contributions to the published work.

The corresponding author is responsible for ensuring that the descriptions are accurate and agreed by all authors

The role(s) of all authors should be listed, using the relevant above categories

Authors may have contributed in multiple roles

CRediT in no way changes the journal’s criteria to qualify for authorship

CRediT statements should be provided during the submission process and will appear above the acknowledgment section of the published paper as shown further below.

*Reproduced from Brand et al. (2015), Learned Publishing 28(2), with permission of the authors.

Sample CRediT author statement

Zhang San:  Conceptualization, Methodology, Software  Priya Singh. : Data curation, Writing- Original draft preparation.  Wang Wu : Visualization, Investigation.  Jan Jansen :  Supervision. : Ajay Kumar : Software, Validation.:  Sun Qi:  Writing- Reviewing and Editing,

Read more about CRediT  here opens in new tab/window  or check out this  article from  Authors' Updat e:  CRediT where credit's due .