how to write and publish an academic research paper

Peer Recognized

Make a name in academia

How to Write a Research Paper: the LEAP approach (+cheat sheet)

In this article I will show you how to write a research paper using the four LEAP writing steps. The LEAP academic writing approach is a step-by-step method for turning research results into a published paper .

The LEAP writing approach has been the cornerstone of the 70 + research papers that I have authored and the 3700+ citations these paper have accumulated within 9 years since the completion of my PhD. I hope the LEAP approach will help you just as much as it has helped me to make an real, tangible impact with my research.

What is the LEAP research paper writing approach?

I designed the LEAP writing approach not only for merely writing the papers. My goal with the writing system was to show young scientists how to first think about research results and then how to efficiently write each section of the research paper.

In other words, you will see how to write a research paper by first analyzing the results and then building a logical, persuasive arguments. In this way, instead of being afraid of writing research paper, you will be able to rely on the paper writing process to help you with what is the most demanding task in getting published – thinking.

The four research paper writing steps according to the LEAP approach:

I will show each of these steps in detail. And you will be able to download the LEAP cheat sheet for using with every paper you write.

But before I tell you how to efficiently write a research paper, I want to show you what is the problem with the way scientists typically write a research paper and why the LEAP approach is more efficient.

How scientists typically write a research paper (and why it isn’t efficient)

Writing a research paper can be tough, especially for a young scientist. Your reasoning needs to be persuasive and thorough enough to convince readers of your arguments. The description has to be derived from research evidence, from prior art, and from your own judgment. This is a tough feat to accomplish.

The figure below shows the sequence of the different parts of a typical research paper. Depending on the scientific journal, some sections might be merged or nonexistent, but the general outline of a research paper will remain very similar.

Here is the problem: Most people make the mistake of writing in this same sequence.

While the structure of scientific articles is designed to help the reader follow the research, it does little to help the scientist write the paper. This is because the layout of research articles starts with the broad (introduction) and narrows down to the specifics (results). See in the figure below how the research paper is structured in terms of the breath of information that each section entails.

How to write a research paper according to the LEAP approach

For a scientist, it is much easier to start writing a research paper with laying out the facts in the narrow sections (i.e. results), step back to describe them (i.e. write the discussion), and step back again to explain the broader picture in the introduction.

For example, it might feel intimidating to start writing a research paper by explaining your research’s global significance in the introduction, while it is easy to plot the figures in the results. When plotting the results, there is not much room for wiggle: the results are what they are.

Starting to write a research papers from the results is also more fun because you finally get to see and understand the complete picture of the research that you have worked on.

Most importantly, following the LEAP approach will help you first make sense of the results yourself and then clearly communicate them to the readers. That is because the sequence of writing allows you to slowly understand the meaning of the results and then develop arguments for presenting to your readers.

I have personally been able to write and submit a research article in three short days using this method.

Step 1: Lay Out the Facts

You have worked long hours on a research project that has produced results and are no doubt curious to determine what they exactly mean. There is no better way to do this than by preparing figures, graphics and tables. This is what the first LEAP step is focused on – diving into the results.

How to p repare charts and tables for a research paper

Your first task is to try out different ways of visually demonstrating the research results. In many fields, the central items of a journal paper will be charts that are based on the data generated during research. In other fields, these might be conceptual diagrams, microscopy images, schematics and a number of other types of scientific graphics which should visually communicate the research study and its results to the readers. If you have reasonably small number of data points, data tables might be useful as well.

Tips for preparing charts and tables

• Try multiple chart types but in the finished paper only use the one that best conveys the message you want to present to the readers
• Follow the eight chart design progressions for selecting and refining a data chart for your paper: https://peerrecognized.com/chart-progressions
• Prepare scientific graphics and visualizations for your paper using the scientific graphic design cheat sheet: https://peerrecognized.com/tools-for-creating-scientific-illustrations/

How to describe the results of your research

Now that you have your data charts, graphics and tables laid out in front of you – describe what you see in them. Seek to answer the question: What have I found?  Your statements should progress in a logical sequence and be backed by the visual information. Since, at this point, you are simply explaining what everyone should be able to see for themselves, you can use a declarative tone: The figure X demonstrates that…

Tips for describing the research results :

• Answer the question: “ What have I found? “
• Use declarative tone since you are simply describing observations

Step 2: Explain the results

The core aspect of your research paper is not actually the results; it is the explanation of their meaning. In the second LEAP step, you will do some heavy lifting by guiding the readers through the results using logic backed by previous scientific research.

How to define the Message of a research paper

To define the central message of your research paper, imagine how you would explain your research to a colleague in 20 seconds . If you succeed in effectively communicating your paper’s message, a reader should be able to recount your findings in a similarly concise way even a year after reading it. This clarity will increase the chances that someone uses the knowledge you generated, which in turn raises the likelihood of citations to your research paper. 

Tips for defining the paper’s central message :

• Write the paper’s core message in a single sentence or two bullet points
• Write the core message in the header of the research paper manuscript

How to write the Discussion section of a research paper

In the discussion section you have to demonstrate why your research paper is worthy of publishing. In other words, you must now answer the all-important So what? question . How well you do so will ultimately define the success of your research paper.

Here are three steps to get started with writing the discussion section:

• Write bullet points of the things that convey the central message of the research article (these may evolve into subheadings later on).
• Make a list with the arguments or observations that support each idea.
• Finally, expand on each point to make full sentences and paragraphs.

Tips for writing the discussion section:

• What is the meaning of the results?
• Was the hypothesis confirmed?
• Write bullet points that support the core message
• List logical arguments for each bullet point, group them into sections
• Instead of repeating research timeline, use a presentation sequence that best supports your logic
• Convert arguments to full paragraphs; be confident but do not overhype
• Refer to both supportive and contradicting research papers for maximum credibility

How to write the Conclusions of a research paper

Since some readers might just skim through your research paper and turn directly to the conclusions, it is a good idea to make conclusion a standalone piece. In the first few sentences of the conclusions, briefly summarize the methodology and try to avoid using abbreviations (if you do, explain what they mean).

After this introduction, summarize the findings from the discussion section. Either paragraph style or bullet-point style conclusions can be used. I prefer the bullet-point style because it clearly separates the different conclusions and provides an easy-to-digest overview for the casual browser. It also forces me to be more succinct.

Tips for writing the conclusion section :

• Summarize the key findings, starting with the most important one
• Make conclusions standalone (short summary, avoid abbreviations)
• Add an optional take-home message and suggest future research in the last paragraph

How to refine the Objective of a research paper

The objective is a short, clear statement defining the paper’s research goals. It can be included either in the final paragraph of the introduction, or as a separate subsection after the introduction. Avoid writing long paragraphs with in-depth reasoning, references, and explanation of methodology since these belong in other sections. The paper’s objective can often be written in a single crisp sentence.

Tips for writing the objective section :

• The objective should ask the question that is answered by the central message of the research paper
• The research objective should be clear long before writing a paper. At this point, you are simply refining it to make sure it is addressed in the body of the paper.

How to write the Methodology section of your research paper

When writing the methodology section, aim for a depth of explanation that will allow readers to reproduce the study . This means that if you are using a novel method, you will have to describe it thoroughly. If, on the other hand, you applied a standardized method, or used an approach from another paper, it will be enough to briefly describe it with reference to the detailed original source.

Remember to also detail the research population, mention how you ensured representative sampling, and elaborate on what statistical methods you used to analyze the results.

Tips for writing the methodology section :

• Include enough detail to allow reproducing the research
• Provide references if the methods are known
• Create a methodology flow chart to add clarity
• Describe the research population, sampling methodology, statistical methods for result analysis
• Describe what methodology, test methods, materials, and sample groups were used in the research.

Step 3: Advertize the research

Step 3 of the LEAP writing approach is designed to entice the casual browser into reading your research paper. This advertising can be done with an informative title, an intriguing abstract, as well as a thorough explanation of the underlying need for doing the research within the introduction.

How to write the Introduction of a research paper

The introduction section should leave no doubt in the mind of the reader that what you are doing is important and that this work could push scientific knowledge forward. To do this convincingly, you will need to have a good knowledge of what is state-of-the-art in your field. You also need be able to see the bigger picture in order to demonstrate the potential impacts of your research work.

Think of the introduction as a funnel, going from wide to narrow, as shown in the figure below:

• Start with a brief context to explain what do we already know,
• Follow with the motivation for the research study and explain why should we care about it,
• Explain the research gap you are going to bridge within this research paper,
• Describe the approach you will take to solve the problem.

Tips for writing the introduction section :

• Follow the Context – Motivation – Research gap – Approach funnel for writing the introduction
• Explain how others tried and how you plan to solve the research problem
• Do a thorough literature review before writing the introduction
• Start writing the introduction by using your own words, then add references from the literature

How to prepare the Abstract of a research paper

The abstract acts as your paper’s elevator pitch and is therefore best written only after the main text is finished. In this one short paragraph you must convince someone to take on the time-consuming task of reading your whole research article. So, make the paper easy to read, intriguing, and self-explanatory; avoid jargon and abbreviations.

How to structure the abstract of a research paper:

• The abstract is a single paragraph that follows this structure:
• Problem: why did we research this
• Methodology: typically starts with the words “Here we…” that signal the start of own contribution.
• Results: what we found from the research.
• Conclusions: show why are the findings important

How to compose a research paper Title

The title is the ultimate summary of a research paper. It must therefore entice someone looking for information to click on a link to it and continue reading the article. A title is also used for indexing purposes in scientific databases, so a representative and optimized title will play large role in determining if your research paper appears in search results at all.

Tips for coming up with a research paper title:

• Capture curiosity of potential readers using a clear and descriptive title
• Include broad terms that are often searched
• Add details that uniquely identify the researched subject of your research paper
• Avoid jargon and abbreviations
• Use keywords as title extension (instead of duplicating the words) to increase the chance of appearing in search results

How to prepare Highlights and Graphical Abstract

Highlights are three to five short bullet-point style statements that convey the core findings of the research paper. Notice that the focus is on the findings, not on the process of getting there.

A graphical abstract placed next to the textual abstract visually summarizes the entire research paper in a single, easy-to-follow figure. I show how to create a graphical abstract in my book Research Data Visualization and Scientific Graphics.

Tips for preparing highlights and graphical abstract:

• In highlights show core findings of the research paper (instead of what you did in the study).
• In graphical abstract show take-home message or methodology of the research paper. Learn more about creating a graphical abstract in this article.

Step 4: Prepare for submission

Sometimes it seems that nuclear fusion will stop on the star closest to us (read: the sun will stop to shine) before a submitted manuscript is published in a scientific journal. The publication process routinely takes a long time, and after submitting the manuscript you have very little control over what happens. To increase the chances of a quick publication, you must do your homework before submitting the manuscript. In the fourth LEAP step, you make sure that your research paper is published in the most appropriate journal as quickly and painlessly as possible.

How to select a scientific Journal for your research paper

The best way to find a journal for your research paper is it to review which journals you used while preparing your manuscript. This source listing should provide some assurance that your own research paper, once published, will be among similar articles and, thus, among your field’s trusted sources.

After this initial selection of hand-full of scientific journals, consider the following six parameters for selecting the most appropriate journal for your research paper (read this article to review each step in detail):

• Scope and publishing history
• Ranking and Recognition
• Publishing time
• Acceptance rate
• Content requirements
• Access and Fees

How to select a journal for your research paper:

• Use the six parameters to select the most appropriate scientific journal for your research paper
• Use the following tools for journal selection: https://peerrecognized.com/journals
• Follow the journal’s “Authors guide” formatting requirements

How to Edit you manuscript

No one can write a finished research paper on their first attempt. Before submitting, make sure to take a break from your work for a couple of days, or even weeks. Try not to think about the manuscript during this time. Once it has faded from your memory, it is time to return and edit. The pause will allow you to read the manuscript from a fresh perspective and make edits as necessary.

I have summarized the most useful research paper editing tools in this article.

Tips for editing a research paper:

• Take time away from the research paper to forget about it; then returning to edit,
• Start by editing the content: structure, headings, paragraphs, logic, figures
• Continue by editing the grammar and language; perform a thorough language check using academic writing tools
• Read the entire paper out loud and correct what sounds weird

How to write a compelling Cover Letter for your paper

Begin the cover letter by stating the paper’s title and the type of paper you are submitting (review paper, research paper, short communication). Next, concisely explain why your study was performed, what was done, and what the key findings are. State why the results are important and what impact they might have in the field. Make sure you mention how your approach and findings relate to the scope of the journal in order to show why the article would be of interest to the journal’s readers.

I wrote a separate article that explains what to include in a cover letter here. You can also download a cover letter template from the article.

Tips for writing a cover letter:

• Explain how the findings of your research relate to journal’s scope
• Tell what impact the research results will have
• Show why the research paper will interest the journal’s audience
• Add any legal statements as required in journal’s guide for authors

How to Answer the Reviewers

Reviewers will often ask for new experiments, extended discussion, additional details on the experimental setup, and so forth. In principle, your primary winning tactic will be to agree with the reviewers and follow their suggestions whenever possible. After all, you must earn their blessing in order to get your paper published.

Be sure to answer each review query and stick to the point. In the response to the reviewers document write exactly where in the paper you have made any changes. In the paper itself, highlight the changes using a different color. This way the reviewers are less likely to re-read the entire article and suggest new edits.

In cases when you don’t agree with the reviewers, it makes sense to answer more thoroughly. Reviewers are scientifically minded people and so, with enough logical and supported argument, they will eventually be willing to see things your way.

Tips for answering the reviewers:

• Agree with most review comments, but if you don’t, thoroughly explain why
• Highlight changes in the manuscript
• Do not take the comments personally and cool down before answering

The LEAP research paper writing cheat sheet

Imagine that you are back in grad school and preparing to take an exam on the topic: “How to write a research paper”. As an exemplary student, you would, most naturally, create a cheat sheet summarizing the subject… Well, I did it for you.

This one-page summary of the LEAP research paper writing technique will remind you of the key research paper writing steps. Print it out and stick it to a wall in your office so that you can review it whenever you are writing a new research paper.

Now that we have gone through the four LEAP research paper writing steps, I hope you have a good idea of how to write a research paper. It can be an enjoyable process and once you get the hang of it, the four LEAP writing steps should even help you think about and interpret the research results. This process should enable you to write a well-structured, concise, and compelling research paper.

Have fund with writing your next research paper. I hope it will turn out great!

Learn writing papers that get cited

The LEAP writing approach is a blueprint for writing research papers. But to be efficient and write papers that get cited, you need more than that.

My name is Martins Zaumanis and in my interactive course Research Paper Writing Masterclass I will show you how to  visualize  your research results,  frame a message  that convinces your readers, and write  each section  of the paper. Step-by-step.

And of course – you will learn to respond the infamous  Reviewer No.2.

Hey! My name is Martins Zaumanis and I am a materials scientist in Switzerland ( Google Scholar ). As the first person in my family with a PhD, I have first-hand experience of the challenges starting scientists face in academia. With this blog, I want to help young researchers succeed in academia. I call the blog “Peer Recognized”, because peer recognition is what lifts academic careers and pushes science forward.

Besides this blog, I have written the Peer Recognized book series and created the Peer Recognized Academy offering interactive online courses.

Related articles:

One comment

• Pingback: Research Paper Outline with Key Sentence Skeleton (+Paper Template)

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

I want to join the Peer Recognized newsletter!

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Privacy Overview

Copyright © 2024 Martins Zaumanis

Contacts:  [email protected]  

Privacy Policy 

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing
• Research Papers

How to Write and Publish Your Research in a Journal

Last Updated: May 26, 2024 Fact Checked

Choosing a Journal

Writing the research paper, editing & revising your paper, submitting your paper, navigating the peer review process, research paper help.

This article was co-authored by Matthew Snipp, PhD and by wikiHow staff writer, Cheyenne Main . C. Matthew Snipp is the Burnet C. and Mildred Finley Wohlford Professor of Humanities and Sciences in the Department of Sociology at Stanford University. He is also the Director for the Institute for Research in the Social Science’s Secure Data Center. He has been a Research Fellow at the U.S. Bureau of the Census and a Fellow at the Center for Advanced Study in the Behavioral Sciences. He has published 3 books and over 70 articles and book chapters on demography, economic development, poverty and unemployment. He is also currently serving on the National Institute of Child Health and Development’s Population Science Subcommittee. He holds a Ph.D. in Sociology from the University of Wisconsin—Madison. There are 13 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 702,093 times.

Publishing a research paper in a peer-reviewed journal allows you to network with other scholars, get your name and work into circulation, and further refine your ideas and research. Before submitting your paper, make sure it reflects all the work you’ve done and have several people read over it and make comments. Keep reading to learn how you can choose a journal, prepare your work for publication, submit it, and revise it after you get a response back.

Things You Should Know

• Create a list of journals you’d like to publish your work in and choose one that best aligns with your topic and your desired audience.
• Prepare your manuscript using the journal’s requirements and ask at least 2 professors or supervisors to review your paper.
• Write a cover letter that “sells” your manuscript, says how your research adds to your field and explains why you chose the specific journal you’re submitting to.

• Ask your professors or supervisors for well-respected journals that they’ve had good experiences publishing with and that they read regularly.
• Many journals also only accept specific formats, so by choosing a journal before you start, you can write your article to their specifications and increase your chances of being accepted.
• If you’ve already written a paper you’d like to publish, consider whether your research directly relates to a hot topic or area of research in the journals you’re looking into.

• Review the journal’s peer review policies and submission process to see if you’re comfortable creating or adjusting your work according to their standards.
• Open-access journals can increase your readership because anyone can access them.

• Scientific research papers: Instead of a “thesis,” you might write a “research objective” instead. This is where you state the purpose of your research.
• “This paper explores how George Washington’s experiences as a young officer may have shaped his views during difficult circumstances as a commanding officer.”
• “This paper contends that George Washington’s experiences as a young officer on the 1750s Pennsylvania frontier directly impacted his relationship with his Continental Army troops during the harsh winter at Valley Forge.”

• Scientific research papers: Include a “materials and methods” section with the step-by-step process you followed and the materials you used. [5] X Research source
• Read other research papers in your field to see how they’re written. Their format, writing style, subject matter, and vocabulary can help guide your own paper. [6] X Research source

• If you’re writing about George Washington’s experiences as a young officer, you might emphasize how this research changes our perspective of the first president of the U.S.
• Link this section to your thesis or research objective.
• If you’re writing a paper about ADHD, you might discuss other applications for your research.

• Scientific research papers: You might include your research and/or analytical methods, your main findings or results, and the significance or implications of your research.
• Try to get as many people as you can to read over your abstract and provide feedback before you submit your paper to a journal.

• They might also provide templates to help you structure your manuscript according to their specific guidelines. [11] X Research source

• Not all journal reviewers will be experts on your specific topic, so a non-expert “outsider’s perspective” can be valuable.

• If you have a paper on the purification of wastewater with fungi, you might use both the words “fungi” and “mushrooms.”
• Use software like iThenticate, Turnitin, or PlagScan to check for similarities between the submitted article and published material available online. [15] X Research source

• Header: Address the editor who will be reviewing your manuscript by their name, include the date of submission, and the journal you are submitting to.
• First paragraph: Include the title of your manuscript, the type of paper it is (like review, research, or case study), and the research question you wanted to answer and why.
• Second paragraph: Explain what was done in your research, your main findings, and why they are significant to your field.
• Third paragraph: Explain why the journal’s readers would be interested in your work and why your results are important to your field.
• Conclusion: State the author(s) and any journal requirements that your work complies with (like ethical standards”).
• “We confirm that this manuscript has not been published elsewhere and is not under consideration by another journal.”
• “All authors have approved the manuscript and agree with its submission to [insert the name of the target journal].”

• Submit your article to only one journal at a time.
• When submitting online, use your university email account. This connects you with a scholarly institution, which can add credibility to your work.

• Accept: Only minor adjustments are needed, based on the provided feedback by the reviewers. A first submission will rarely be accepted without any changes needed.
• Revise and Resubmit: Changes are needed before publication can be considered, but the journal is still very interested in your work.
• Reject and Resubmit: Extensive revisions are needed. Your work may not be acceptable for this journal, but they might also accept it if significant changes are made.
• Reject: The paper isn’t and won’t be suitable for this publication, but that doesn’t mean it might not work for another journal.

• Try organizing the reviewer comments by how easy it is to address them. That way, you can break your revisions down into more manageable parts.
• If you disagree with a comment made by a reviewer, try to provide an evidence-based explanation when you resubmit your paper.

• If you’re resubmitting your paper to the same journal, include a point-by-point response paper that talks about how you addressed all of the reviewers’ comments in your revision. [22] X Research source
• If you’re not sure which journal to submit to next, you might be able to ask the journal editor which publications they recommend.

Expert Q&A

You might also like.

• If reviewers suspect that your submitted manuscript plagiarizes another work, they may refer to a Committee on Publication Ethics (COPE) flowchart to see how to move forward. [23] X Research source Thanks Helpful 0 Not Helpful 0

• ↑ https://www.wiley.com/en-us/network/publishing/research-publishing/choosing-a-journal/6-steps-to-choosing-the-right-journal-for-your-research-infographic
• ↑ https://link.springer.com/article/10.1007/s13187-020-01751-z
• ↑ https://libguides.unomaha.edu/c.php?g=100510&p=651627
• ↑ https://www.canberra.edu.au/library/start-your-research/research_help/publishing-research
• ↑ https://writingcenter.fas.harvard.edu/conclusions
• ↑ https://writing.wisc.edu/handbook/assignments/writing-an-abstract-for-your-research-paper/
• ↑ https://www.springer.com/gp/authors-editors/book-authors-editors/your-publication-journey/manuscript-preparation
• ↑ https://apus.libanswers.com/writing/faq/2391
• ↑ https://academicguides.waldenu.edu/library/keyword/search-strategy
• ↑ https://ifis.libguides.com/journal-publishing-guide/submitting-your-paper
• ↑ https://www.springer.com/kr/authors-editors/authorandreviewertutorials/submitting-to-a-journal-and-peer-review/cover-letters/10285574
• ↑ https://www.apa.org/monitor/sep02/publish.aspx
• ↑ Matthew Snipp, PhD. Research Fellow, U.S. Bureau of the Census. Expert Interview. 26 March 2020.

About This Article

To publish a research paper, ask a colleague or professor to review your paper and give you feedback. Once you've revised your work, familiarize yourself with different academic journals so that you can choose the publication that best suits your paper. Make sure to look at the "Author's Guide" so you can format your paper according to the guidelines for that publication. Then, submit your paper and don't get discouraged if it is not accepted right away. You may need to revise your paper and try again. To learn about the different responses you might get from journals, see our reviewer's explanation below. Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

RAMDEV GOHIL

Oct 16, 2017

Did this article help you?

David Okandeji

Oct 23, 2019

Revati Joshi

Feb 13, 2017

Shahzad Khan

Jul 1, 2017

Apr 7, 2017

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Get all the best how-tos!

Sign up for wikiHow's weekly email newsletter

How to Write and Publish a Research Paper for a Peer-Reviewed Journal

• Open access
• Published: 30 April 2020
• Volume 36 , pages 909–913, ( 2021 )

Cite this article

You have full access to this open access article

• Clara Busse   ORCID: orcid.org/0000-0002-0178-1000 1 &
• Ella August   ORCID: orcid.org/0000-0001-5151-1036 1 , 2  

275k Accesses

15 Citations

719 Altmetric

Explore all metrics

Communicating research findings is an essential step in the research process. Often, peer-reviewed journals are the forum for such communication, yet many researchers are never taught how to write a publishable scientific paper. In this article, we explain the basic structure of a scientific paper and describe the information that should be included in each section. We also identify common pitfalls for each section and recommend strategies to avoid them. Further, we give advice about target journal selection and authorship. In the online resource 1 , we provide an example of a high-quality scientific paper, with annotations identifying the elements we describe in this article.

Similar content being viewed by others

How to Choose the Right Journal

The Point Is…to Publish?

Writing and publishing a scientific paper

Avoid common mistakes on your manuscript.

Introduction

Writing a scientific paper is an important component of the research process, yet researchers often receive little formal training in scientific writing. This is especially true in low-resource settings. In this article, we explain why choosing a target journal is important, give advice about authorship, provide a basic structure for writing each section of a scientific paper, and describe common pitfalls and recommendations for each section. In the online resource 1 , we also include an annotated journal article that identifies the key elements and writing approaches that we detail here. Before you begin your research, make sure you have ethical clearance from all relevant ethical review boards.

Select a Target Journal Early in the Writing Process

We recommend that you select a “target journal” early in the writing process; a “target journal” is the journal to which you plan to submit your paper. Each journal has a set of core readers and you should tailor your writing to this readership. For example, if you plan to submit a manuscript about vaping during pregnancy to a pregnancy-focused journal, you will need to explain what vaping is because readers of this journal may not have a background in this topic. However, if you were to submit that same article to a tobacco journal, you would not need to provide as much background information about vaping.

Information about a journal’s core readership can be found on its website, usually in a section called “About this journal” or something similar. For example, the Journal of Cancer Education presents such information on the “Aims and Scope” page of its website, which can be found here: https://www.springer.com/journal/13187/aims-and-scope .

Peer reviewer guidelines from your target journal are an additional resource that can help you tailor your writing to the journal and provide additional advice about crafting an effective article [ 1 ]. These are not always available, but it is worth a quick web search to find out.

Identify Author Roles Early in the Process

Early in the writing process, identify authors, determine the order of authors, and discuss the responsibilities of each author. Standard author responsibilities have been identified by The International Committee of Medical Journal Editors (ICMJE) [ 2 ]. To set clear expectations about each team member’s responsibilities and prevent errors in communication, we also suggest outlining more detailed roles, such as who will draft each section of the manuscript, write the abstract, submit the paper electronically, serve as corresponding author, and write the cover letter. It is best to formalize this agreement in writing after discussing it, circulating the document to the author team for approval. We suggest creating a title page on which all authors are listed in the agreed-upon order. It may be necessary to adjust authorship roles and order during the development of the paper. If a new author order is agreed upon, be sure to update the title page in the manuscript draft.

In the case where multiple papers will result from a single study, authors should discuss who will author each paper. Additionally, authors should agree on a deadline for each paper and the lead author should take responsibility for producing an initial draft by this deadline.

Structure of the Introduction Section

The introduction section should be approximately three to five paragraphs in length. Look at examples from your target journal to decide the appropriate length. This section should include the elements shown in Fig.  1 . Begin with a general context, narrowing to the specific focus of the paper. Include five main elements: why your research is important, what is already known about the topic, the “gap” or what is not yet known about the topic, why it is important to learn the new information that your research adds, and the specific research aim(s) that your paper addresses. Your research aim should address the gap you identified. Be sure to add enough background information to enable readers to understand your study. Table 1 provides common introduction section pitfalls and recommendations for addressing them.

The main elements of the introduction section of an original research article. Often, the elements overlap

Methods Section

The purpose of the methods section is twofold: to explain how the study was done in enough detail to enable its replication and to provide enough contextual detail to enable readers to understand and interpret the results. In general, the essential elements of a methods section are the following: a description of the setting and participants, the study design and timing, the recruitment and sampling, the data collection process, the dataset, the dependent and independent variables, the covariates, the analytic approach for each research objective, and the ethical approval. The hallmark of an exemplary methods section is the justification of why each method was used. Table 2 provides common methods section pitfalls and recommendations for addressing them.

Results Section

The focus of the results section should be associations, or lack thereof, rather than statistical tests. Two considerations should guide your writing here. First, the results should present answers to each part of the research aim. Second, return to the methods section to ensure that the analysis and variables for each result have been explained.

Begin the results section by describing the number of participants in the final sample and details such as the number who were approached to participate, the proportion who were eligible and who enrolled, and the number of participants who dropped out. The next part of the results should describe the participant characteristics. After that, you may organize your results by the aim or by putting the most exciting results first. Do not forget to report your non-significant associations. These are still findings.

Tables and figures capture the reader’s attention and efficiently communicate your main findings [ 3 ]. Each table and figure should have a clear message and should complement, rather than repeat, the text. Tables and figures should communicate all salient details necessary for a reader to understand the findings without consulting the text. Include information on comparisons and tests, as well as information about the sample and timing of the study in the title, legend, or in a footnote. Note that figures are often more visually interesting than tables, so if it is feasible to make a figure, make a figure. To avoid confusing the reader, either avoid abbreviations in tables and figures, or define them in a footnote. Note that there should not be citations in the results section and you should not interpret results here. Table 3 provides common results section pitfalls and recommendations for addressing them.

Discussion Section

Opposite the introduction section, the discussion should take the form of a right-side-up triangle beginning with interpretation of your results and moving to general implications (Fig.  2 ). This section typically begins with a restatement of the main findings, which can usually be accomplished with a few carefully-crafted sentences.

Major elements of the discussion section of an original research article. Often, the elements overlap

Next, interpret the meaning or explain the significance of your results, lifting the reader’s gaze from the study’s specific findings to more general applications. Then, compare these study findings with other research. Are these findings in agreement or disagreement with those from other studies? Does this study impart additional nuance to well-accepted theories? Situate your findings within the broader context of scientific literature, then explain the pathways or mechanisms that might give rise to, or explain, the results.

Journals vary in their approach to strengths and limitations sections: some are embedded paragraphs within the discussion section, while some mandate separate section headings. Keep in mind that every study has strengths and limitations. Candidly reporting yours helps readers to correctly interpret your research findings.

The next element of the discussion is a summary of the potential impacts and applications of the research. Should these results be used to optimally design an intervention? Does the work have implications for clinical protocols or public policy? These considerations will help the reader to further grasp the possible impacts of the presented work.

Finally, the discussion should conclude with specific suggestions for future work. Here, you have an opportunity to illuminate specific gaps in the literature that compel further study. Avoid the phrase “future research is necessary” because the recommendation is too general to be helpful to readers. Instead, provide substantive and specific recommendations for future studies. Table 4 provides common discussion section pitfalls and recommendations for addressing them.

Follow the Journal’s Author Guidelines

After you select a target journal, identify the journal’s author guidelines to guide the formatting of your manuscript and references. Author guidelines will often (but not always) include instructions for titles, cover letters, and other components of a manuscript submission. Read the guidelines carefully. If you do not follow the guidelines, your article will be sent back to you.

Finally, do not submit your paper to more than one journal at a time. Even if this is not explicitly stated in the author guidelines of your target journal, it is considered inappropriate and unprofessional.

Your title should invite readers to continue reading beyond the first page [ 4 , 5 ]. It should be informative and interesting. Consider describing the independent and dependent variables, the population and setting, the study design, the timing, and even the main result in your title. Because the focus of the paper can change as you write and revise, we recommend you wait until you have finished writing your paper before composing the title.

Be sure that the title is useful for potential readers searching for your topic. The keywords you select should complement those in your title to maximize the likelihood that a researcher will find your paper through a database search. Avoid using abbreviations in your title unless they are very well known, such as SNP, because it is more likely that someone will use a complete word rather than an abbreviation as a search term to help readers find your paper.

After you have written a complete draft, use the checklist (Fig. 3 ) below to guide your revisions and editing. Additional resources are available on writing the abstract and citing references [ 5 ]. When you feel that your work is ready, ask a trusted colleague or two to read the work and provide informal feedback. The box below provides a checklist that summarizes the key points offered in this article.

Checklist for manuscript quality

Data Availability

Michalek AM (2014) Down the rabbit hole…advice to reviewers. J Cancer Educ 29:4–5

Article   Google Scholar  

International Committee of Medical Journal Editors. Defining the role of authors and contributors: who is an author? http://www.icmje.org/recommendations/browse/roles-and-responsibilities/defining-the-role-of-authosrs-and-contributors.html . Accessed 15 January, 2020

Vetto JT (2014) Short and sweet: a short course on concise medical writing. J Cancer Educ 29(1):194–195

Brett M, Kording K (2017) Ten simple rules for structuring papers. PLoS ComputBiol. https://doi.org/10.1371/journal.pcbi.1005619

Lang TA (2017) Writing a better research article. J Public Health Emerg. https://doi.org/10.21037/jphe.2017.11.06

Download references

Acknowledgments

Ella August is grateful to the Sustainable Sciences Institute for mentoring her in training researchers on writing and publishing their research.

Code Availability

Not applicable.

Author information

Authors and affiliations.

Department of Maternal and Child Health, University of North Carolina Gillings School of Global Public Health, 135 Dauer Dr, 27599, Chapel Hill, NC, USA

Clara Busse & Ella August

Department of Epidemiology, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI, 48109-2029, USA

Ella August

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Ella August .

Ethics declarations

Conflicts of interests.

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

(PDF 362 kb)

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ .

Reprints and permissions

About this article

Busse, C., August, E. How to Write and Publish a Research Paper for a Peer-Reviewed Journal. J Canc Educ 36 , 909–913 (2021). https://doi.org/10.1007/s13187-020-01751-z

Download citation

Published : 30 April 2020

Issue Date : October 2021

DOI : https://doi.org/10.1007/s13187-020-01751-z

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Manuscripts
• Scientific writing
• Find a journal
• Publish with us
• Track your research

• Privacy Policy

Home » How to Publish a Research Paper – Step by Step Guide

How to Publish a Research Paper – Step by Step Guide

Table of Contents

Publishing a research paper is an important step for researchers to disseminate their findings to a wider audience and contribute to the advancement of knowledge in their field. Whether you are a graduate student, a postdoctoral fellow, or an established researcher, publishing a paper requires careful planning, rigorous research, and clear writing. In this process, you will need to identify a research question , conduct a thorough literature review , design a methodology, analyze data, and draw conclusions. Additionally, you will need to consider the appropriate journals or conferences to submit your work to and adhere to their guidelines for formatting and submission. In this article, we will discuss some ways to publish your Research Paper.

How to Publish a Research Paper

To Publish a Research Paper follow the guide below:

• Conduct original research : Conduct thorough research on a specific topic or problem. Collect data, analyze it, and draw conclusions based on your findings.
• Write the paper : Write a detailed paper describing your research. It should include an abstract, introduction, literature review, methodology, results, discussion, and conclusion.
• Choose a suitable journal or conference : Look for a journal or conference that specializes in your research area. You can check their submission guidelines to ensure your paper meets their requirements.
• Prepare your submission: Follow the guidelines and prepare your submission, including the paper, abstract, cover letter, and any other required documents.
• Submit the paper: Submit your paper online through the journal or conference website. Make sure you meet the submission deadline.
• Peer-review process : Your paper will be reviewed by experts in the field who will provide feedback on the quality of your research, methodology, and conclusions.
• Revisions : Based on the feedback you receive, revise your paper and resubmit it.
• Acceptance : Once your paper is accepted, you will receive a notification from the journal or conference. You may need to make final revisions before the paper is published.
• Publication : Your paper will be published online or in print. You can also promote your work through social media or other channels to increase its visibility.

How to Choose Journal for Research Paper Publication

Here are some steps to follow to help you select an appropriate journal:

• Identify your research topic and audience : Your research topic and intended audience should guide your choice of journal. Identify the key journals in your field of research and read the scope and aim of the journal to determine if your paper is a good fit.
• Analyze the journal’s impact and reputation : Check the impact factor and ranking of the journal, as well as its acceptance rate and citation frequency. A high-impact journal can give your paper more visibility and credibility.
• Consider the journal’s publication policies : Look for the journal’s publication policies such as the word count limit, formatting requirements, open access options, and submission fees. Make sure that you can comply with the requirements and that the journal is in line with your publication goals.
• Look at recent publications : Review recent issues of the journal to evaluate whether your paper would fit in with the journal’s current content and style.
• Seek advice from colleagues and mentors: Ask for recommendations and suggestions from your colleagues and mentors in your field, especially those who have experience publishing in the same or similar journals.
• Be prepared to make changes : Be prepared to revise your paper according to the requirements and guidelines of the chosen journal. It is also important to be open to feedback from the editor and reviewers.

List of Journals for Research Paper Publications

There are thousands of academic journals covering various fields of research. Here are some of the most popular ones, categorized by field:

General/Multidisciplinary

• Nature: https://www.nature.com/
• Science: https://www.sciencemag.org/
• PLOS ONE: https://journals.plos.org/plosone/
• Proceedings of the National Academy of Sciences (PNAS): https://www.pnas.org/
• The Lancet: https://www.thelancet.com/
• JAMA (Journal of the American Medical Association): https://jamanetwork.com/journals/jama

Social Sciences/Humanities

• Journal of Personality and Social Psychology: https://www.apa.org/pubs/journals/psp
• Journal of Consumer Research: https://www.journals.uchicago.edu/journals/jcr
• Journal of Educational Psychology: https://www.apa.org/pubs/journals/edu
• Journal of Applied Psychology: https://www.apa.org/pubs/journals/apl
• Journal of Communication: https://academic.oup.com/joc
• American Journal of Political Science: https://ajps.org/
• Journal of International Business Studies: https://www.jibs.net/
• Journal of Marketing Research: https://www.ama.org/journal-of-marketing-research/

Natural Sciences

• Journal of Biological Chemistry: https://www.jbc.org/
• Cell: https://www.cell.com/
• Science Advances: https://advances.sciencemag.org/
• Chemical Reviews: https://pubs.acs.org/journal/chreay
• Angewandte Chemie: https://onlinelibrary.wiley.com/journal/15213765
• Physical Review Letters: https://journals.aps.org/prl/
• Journal of Geophysical Research: https://agupubs.onlinelibrary.wiley.com/journal/2156531X
• Journal of High Energy Physics: https://link.springer.com/journal/13130

Engineering/Technology

• IEEE Transactions on Neural Networks and Learning Systems: https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=5962385
• IEEE Transactions on Power Systems: https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=59
• IEEE Transactions on Medical Imaging: https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=42
• IEEE Transactions on Control Systems Technology: https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=87
• Journal of Engineering Mechanics: https://ascelibrary.org/journal/jenmdt
• Journal of Materials Science: https://www.springer.com/journal/10853
• Journal of Chemical Engineering of Japan: https://www.jstage.jst.go.jp/browse/jcej
• Journal of Mechanical Design: https://asmedigitalcollection.asme.org/mechanicaldesign

Medical/Health Sciences

• New England Journal of Medicine: https://www.nejm.org/
• The BMJ (formerly British Medical Journal): https://www.bmj.com/
• Journal of the American Medical Association (JAMA): https://jamanetwork.com/journals/jama
• Annals of Internal Medicine: https://www.acpjournals.org/journal/aim
• American Journal of Epidemiology: https://academic.oup.com/aje
• Journal of Clinical Oncology: https://ascopubs.org/journal/jco
• Journal of Infectious Diseases: https://academic.oup.com/jid

List of Conferences for Research Paper Publications

There are many conferences that accept research papers for publication. The specific conferences you should consider will depend on your field of research. Here are some suggestions for conferences in a few different fields:

Computer Science and Information Technology:

• IEEE International Conference on Computer Communications (INFOCOM): https://www.ieee-infocom.org/
• ACM SIGCOMM Conference on Data Communication: https://conferences.sigcomm.org/sigcomm/
• IEEE Symposium on Security and Privacy (SP): https://www.ieee-security.org/TC/SP/
• ACM Conference on Computer and Communications Security (CCS): https://www.sigsac.org/ccs/
• ACM Conference on Human-Computer Interaction (CHI): https://chi2022.acm.org/

Engineering:

• IEEE International Conference on Robotics and Automation (ICRA): https://www.ieee-icra.org/
• International Conference on Mechanical and Aerospace Engineering (ICMAE): http://www.icmae.org/
• International Conference on Civil and Environmental Engineering (ICCEE): http://www.iccee.org/
• International Conference on Materials Science and Engineering (ICMSE): http://www.icmse.org/
• International Conference on Energy and Power Engineering (ICEPE): http://www.icepe.org/

Natural Sciences:

• American Chemical Society National Meeting & Exposition: https://www.acs.org/content/acs/en/meetings/national-meeting.html
• American Physical Society March Meeting: https://www.aps.org/meetings/march/
• International Conference on Environmental Science and Technology (ICEST): http://www.icest.org/
• International Conference on Natural Science and Environment (ICNSE): http://www.icnse.org/
• International Conference on Life Science and Biological Engineering (LSBE): http://www.lsbe.org/

Social Sciences:

• Annual Meeting of the American Sociological Association (ASA): https://www.asanet.org/annual-meeting-2022
• International Conference on Social Science and Humanities (ICSSH): http://www.icssh.org/
• International Conference on Psychology and Behavioral Sciences (ICPBS): http://www.icpbs.org/
• International Conference on Education and Social Science (ICESS): http://www.icess.org/
• International Conference on Management and Information Science (ICMIS): http://www.icmis.org/

How to Publish a Research Paper in Journal

Publishing a research paper in a journal is a crucial step in disseminating scientific knowledge and contributing to the field. Here are the general steps to follow:

• Choose a research topic : Select a topic of your interest and identify a research question or problem that you want to investigate. Conduct a literature review to identify the gaps in the existing knowledge that your research will address.
• Conduct research : Develop a research plan and methodology to collect data and conduct experiments. Collect and analyze data to draw conclusions that address the research question.
• Write a paper: Organize your findings into a well-structured paper with clear and concise language. Your paper should include an introduction, literature review, methodology, results, discussion, and conclusion. Use academic language and provide references for your sources.
• Choose a journal: Choose a journal that is relevant to your research topic and audience. Consider factors such as impact factor, acceptance rate, and the reputation of the journal.
• Follow journal guidelines : Review the submission guidelines and formatting requirements of the journal. Follow the guidelines carefully to ensure that your paper meets the journal’s requirements.
• Submit your paper : Submit your paper to the journal through the online submission system or by email. Include a cover letter that briefly explains the significance of your research and why it is suitable for the journal.
• Wait for reviews: Your paper will be reviewed by experts in the field. Be prepared to address their comments and make revisions to your paper.
• Revise and resubmit: Make revisions to your paper based on the reviewers’ comments and resubmit it to the journal. If your paper is accepted, congratulations! If not, consider revising and submitting it to another journal.
• Address reviewer comments : Reviewers may provide comments and suggestions for revisions to your paper. Address these comments carefully and thoughtfully to improve the quality of your paper.
• Submit the final version: Once your revisions are complete, submit the final version of your paper to the journal. Be sure to follow any additional formatting guidelines and requirements provided by the journal.
• Publication : If your paper is accepted, it will be published in the journal. Some journals provide online publication while others may publish a print version. Be sure to cite your published paper in future research and communicate your findings to the scientific community.

How to Publish a Research Paper for Students

Here are some steps you can follow to publish a research paper as an Under Graduate or a High School Student:

• Select a topic: Choose a topic that is relevant and interesting to you, and that you have a good understanding of.
• Conduct research : Gather information and data on your chosen topic through research, experiments, surveys, or other means.
• Write the paper : Start with an outline, then write the introduction, methods, results, discussion, and conclusion sections of the paper. Be sure to follow any guidelines provided by your instructor or the journal you plan to submit to.
• Edit and revise: Review your paper for errors in spelling, grammar, and punctuation. Ask a peer or mentor to review your paper and provide feedback for improvement.
• Choose a journal : Look for journals that publish papers in your field of study and that are appropriate for your level of research. Some popular journals for students include PLOS ONE, Nature, and Science.
• Submit the paper: Follow the submission guidelines for the journal you choose, which typically include a cover letter, abstract, and formatting requirements. Be prepared to wait several weeks to months for a response.
• Address feedback : If your paper is accepted with revisions, address the feedback from the reviewers and resubmit your paper. If your paper is rejected, review the feedback and consider revising and resubmitting to a different journal.

How to Publish a Research Paper for Free

Publishing a research paper for free can be challenging, but it is possible. Here are some steps you can take to publish your research paper for free:

• Choose a suitable open-access journal: Look for open-access journals that are relevant to your research area. Open-access journals allow readers to access your paper without charge, so your work will be more widely available.
• Check the journal’s reputation : Before submitting your paper, ensure that the journal is reputable by checking its impact factor, publication history, and editorial board.
• Follow the submission guidelines : Every journal has specific guidelines for submitting papers. Make sure to follow these guidelines carefully to increase the chances of acceptance.
• Submit your paper : Once you have completed your research paper, submit it to the journal following their submission guidelines.
• Wait for the review process: Your paper will undergo a peer-review process, where experts in your field will evaluate your work. Be patient during this process, as it can take several weeks or even months.
• Revise your paper : If your paper is rejected, don’t be discouraged. Revise your paper based on the feedback you receive from the reviewers and submit it to another open-access journal.
• Promote your research: Once your paper is published, promote it on social media and other online platforms. This will increase the visibility of your work and help it reach a wider audience.

Journals and Conferences for Free Research Paper publications

Here are the websites of the open-access journals and conferences mentioned:

Open-Access Journals:

• PLOS ONE – https://journals.plos.org/plosone/
• BMC Research Notes – https://bmcresnotes.biomedcentral.com/
• Frontiers in… – https://www.frontiersin.org/
• Journal of Open Research Software – https://openresearchsoftware.metajnl.com/
• PeerJ – https://peerj.com/

Conferences:

• IEEE Global Communications Conference (GLOBECOM) – https://globecom2022.ieee-globecom.org/
• IEEE International Conference on Computer Communications (INFOCOM) – https://infocom2022.ieee-infocom.org/
• IEEE International Conference on Data Mining (ICDM) – https://www.ieee-icdm.org/
• ACM SIGCOMM Conference on Data Communication (SIGCOMM) – https://conferences.sigcomm.org/sigcomm/
• ACM Conference on Computer and Communications Security (CCS) – https://www.sigsac.org/ccs/CCS2022/

Importance of Research Paper Publication

Research paper publication is important for several reasons, both for individual researchers and for the scientific community as a whole. Here are some reasons why:

• Advancing scientific knowledge : Research papers provide a platform for researchers to present their findings and contribute to the body of knowledge in their field. These papers often contain novel ideas, experimental data, and analyses that can help to advance scientific understanding.
• Building a research career : Publishing research papers is an essential component of building a successful research career. Researchers are often evaluated based on the number and quality of their publications, and having a strong publication record can increase one’s chances of securing funding, tenure, or a promotion.
• Peer review and quality control: Publication in a peer-reviewed journal means that the research has been scrutinized by other experts in the field. This peer review process helps to ensure the quality and validity of the research findings.
• Recognition and visibility : Publishing a research paper can bring recognition and visibility to the researchers and their work. It can lead to invitations to speak at conferences, collaborations with other researchers, and media coverage.
• Impact on society : Research papers can have a significant impact on society by informing policy decisions, guiding clinical practice, and advancing technological innovation.

Advantages of Research Paper Publication

There are several advantages to publishing a research paper, including:

• Recognition: Publishing a research paper allows researchers to gain recognition for their work, both within their field and in the academic community as a whole. This can lead to new collaborations, invitations to conferences, and other opportunities to share their research with a wider audience.
• Career advancement : A strong publication record can be an important factor in career advancement, particularly in academia. Publishing research papers can help researchers secure funding, grants, and promotions.
• Dissemination of knowledge : Research papers are an important way to share new findings and ideas with the broader scientific community. By publishing their research, scientists can contribute to the collective body of knowledge in their field and help advance scientific understanding.
• Feedback and peer review : Publishing a research paper allows other experts in the field to provide feedback on the research, which can help improve the quality of the work and identify potential flaws or limitations. Peer review also helps ensure that research is accurate and reliable.
• Citation and impact : Published research papers can be cited by other researchers, which can help increase the impact and visibility of the research. High citation rates can also help establish a researcher’s reputation and credibility within their field.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Delimitations in Research – Types, Examples and...

Research Objectives – Types, Examples and...

Research Paper Format – Types, Examples and...

Limitations in Research – Types, Examples and...

Informed Consent in Research – Types, Templates...

Theoretical Framework – Types, Examples and...

You are using an outdated browser . Please upgrade your browser today !

How to Write and Publish a Research Paper in 7 Steps

What comes next after you're done with your research? Publishing the results in a journal of course! We tell you how to present your work in the best way possible.

This post is part of a series, which serves to provide hands-on information and resources for authors and editors.

Things have gotten busy in scholarly publishing: These days, a new article gets published in the 50,000 most important peer-reviewed journals every few seconds, while each one takes on average 40 minutes to read. Hundreds of thousands of papers reach the desks of editors and reviewers worldwide each year and 50% of all submissions end up rejected at some stage.

In a nutshell: there is a lot of competition, and the people who decide upon the fate of your manuscript are short on time and overworked. But there are ways to make their lives a little easier and improve your own chances of getting your work published!

Well, it may seem obvious, but before submitting an academic paper, always make sure that it is an excellent reflection of the research you have done and that you present it in the most professional way possible. Incomplete or poorly presented manuscripts can create a great deal of frustration and annoyance for editors who probably won’t even bother wasting the time of the reviewers!

This post will discuss 7 steps to the successful publication of your research paper:

• Check whether your research is publication-ready
• Choose an article type
• Choose a journal
• Construct your paper
• Decide the order of authors
• Check and double-check
• Submit your paper

1. Check Whether Your Research Is Publication-Ready

Should you publish your research at all?

If your work holds academic value – of course – a well-written scholarly article could open doors to your research community. However, if you are not yet sure, whether your research is ready for publication, here are some key questions to ask yourself depending on your field of expertise:

• Have you done or found something new and interesting? Something unique?
• Is the work directly related to a current hot topic?
• Have you checked the latest results or research in the field?
• Have you provided solutions to any difficult problems?
• Have the findings been verified?
• Have the appropriate controls been performed if required?
• Are your findings comprehensive?

If the answers to all relevant questions are “yes”, you need to prepare a good, strong manuscript. Remember, a research paper is only useful if it is clearly understood, reproducible and if it is read and used .

2. Choose An Article Type

The first step is to determine which type of paper is most appropriate for your work and what you want to achieve. The following list contains the most important, usually peer-reviewed article types in the natural sciences:

Full original research papers disseminate completed research findings. On average this type of paper is 8-10 pages long, contains five figures, and 25-30 references. Full original research papers are an important part of the process when developing your career.

Review papers present a critical synthesis of a specific research topic. These papers are usually much longer than original papers and will contain numerous references. More often than not, they will be commissioned by journal editors. Reviews present an excellent way to solidify your research career.

Letters, Rapid or Short Communications are often published for the quick and early communication of significant and original advances. They are much shorter than full articles and usually limited in length by the journal. Journals specifically dedicated to short communications or letters are also published in some fields. In these the authors can present short preliminary findings before developing a full-length paper.

3. Choose a Journal

Are you looking for the right place to publish your paper? Find out here whether a De Gruyter journal might be the right fit.

Submit to journals that you already read, that you have a good feel for. If you do so, you will have a better appreciation of both its culture and the requirements of the editors and reviewers.

Other factors to consider are:

• The specific subject area
• The aims and scope of the journal
• The type of manuscript you have written
• The significance of your work
• The reputation of the journal
• The reputation of the editors within the community
• The editorial/review and production speeds of the journal
• The community served by the journal
• The coverage and distribution
• The accessibility ( open access vs. closed access)

4. Construct Your Paper

Each element of a paper has its purpose, so you should make these sections easy to index and search.

Don’t forget that requirements can differ highly per publication, so always make sure to apply a journal’s specific instructions – or guide – for authors to your manuscript, even to the first draft (text layout, paper citation, nomenclature, figures and table, etc.) It will save you time, and the editor’s.

Also, even in these days of Internet-based publishing, space is still at a premium, so be as concise as possible. As a good journalist would say: “Never use three words when one will do!”

Let’s look at the typical structure of a full research paper, but bear in mind certain subject disciplines may have their own specific requirements so check the instructions for authors on the journal’s home page.

4.1 The Title

It’s important to use the title to tell the reader what your paper is all about! You want to attract their attention, a bit like a newspaper headline does. Be specific and to the point. Keep it informative and concise, and avoid jargon and abbreviations (unless they are universally recognized like DNA, for example).

4.2 The Abstract

This could be termed as the “advertisement” for your article. Make it interesting and easily understood without the reader having to read the whole article. Be accurate and specific, and keep it as brief and concise as possible. Some journals (particularly in the medical fields) will ask you to structure the abstract in distinct, labeled sections, which makes it even more accessible.

A clear abstract will influence whether or not your work is considered and whether an editor should invest more time on it or send it for review.

4.3 Keywords

Keywords are used by abstracting and indexing services, such as PubMed and Web of Science. They are the labels of your manuscript, which make it “searchable” online by other researchers.

Include words or phrases (usually 4-8) that are closely related to your topic but not “too niche” for anyone to find them. Make sure to only use established abbreviations. Think about what scientific terms and its variations your potential readers are likely to use and search for. You can also do a test run of your selected keywords in one of the common academic search engines. Do similar articles to your own appear? Yes? Then that’s a good sign.

4.4 Introduction

This first part of the main text should introduce the problem, as well as any existing solutions you are aware of and the main limitations. Also, state what you hope to achieve with your research.

Do not confuse the introduction with the results, discussion or conclusion.

4.5 Methods

Every research article should include a detailed Methods section (also referred to as “Materials and Methods”) to provide the reader with enough information to be able to judge whether the study is valid and reproducible.

Include detailed information so that a knowledgeable reader can reproduce the experiment. However, use references and supplementary materials to indicate previously published procedures.

4.6 Results

In this section, you will present the essential or primary results of your study. To display them in a comprehensible way, you should use subheadings as well as illustrations such as figures, graphs, tables and photos, as appropriate.

4.7 Discussion

Here you should tell your readers what the results mean .

Do state how the results relate to the study’s aims and hypotheses and how the findings relate to those of other studies. Explain all possible interpretations of your findings and the study’s limitations.

Do not make “grand statements” that are not supported by the data. Also, do not introduce any new results or terms. Moreover, do not ignore work that conflicts or disagrees with your findings. Instead …

Be brave! Address conflicting study results and convince the reader you are the one who is correct.

4.8 Conclusion

Your conclusion isn’t just a summary of what you’ve already written. It should take your paper one step further and answer any unresolved questions.

Sum up what you have shown in your study and indicate possible applications and extensions. The main question your conclusion should answer is: What do my results mean for the research field and my community?

4.9 Acknowledgments and Ethical Statements

It is extremely important to acknowledge anyone who has helped you with your paper, including researchers who supplied materials or reagents (e.g. vectors or antibodies); and anyone who helped with the writing or English, or offered critical comments about the content.

Learn more about academic integrity in our blog post “Scholarly Publication Ethics: 4 Common Mistakes You Want To Avoid” .

Remember to state why people have been acknowledged and ask their permission . Ensure that you acknowledge sources of funding, including any grant or reference numbers.

Furthermore, if you have worked with animals or humans, you need to include information about the ethical approval of your study and, if applicable, whether informed consent was given. Also, state whether you have any competing interests regarding the study (e.g. because of financial or personal relationships.)

4.10 References

The end is in sight, but don’t relax just yet!

De facto, there are often more mistakes in the references than in any other part of the manuscript. It is also one of the most annoying and time-consuming problems for editors.

Remember to cite the main scientific publications on which your work is based. But do not inflate the manuscript with too many references. Avoid excessive – and especially unnecessary – self-citations. Also, avoid excessive citations of publications from the same institute or region.

5. Decide the Order of Authors

In the sciences, the most common way to order the names of the authors is by relative contribution.

Generally, the first author conducts and/or supervises the data analysis and the proper presentation and interpretation of the results. They put the paper together and usually submit the paper to the journal.

Co-authors make intellectual contributions to the data analysis and contribute to data interpretation. They review each paper draft. All of them must be able to present the paper and its results, as well as to defend the implications and discuss study limitations.

Do not leave out authors who should be included or add “gift authors”, i.e. authors who did not contribute significantly.

6. Check and Double-Check

As a final step before submission, ask colleagues to read your work and be constructively critical .

Make sure that the paper is appropriate for the journal – take a last look at their aims and scope. Check if all of the requirements in the instructions for authors are met.

Ensure that the cited literature is balanced. Are the aims, purpose and significance of the results clear?

Conduct a final check for language, either by a native English speaker or an editing service.

7. Submit Your Paper

When you and your co-authors have double-, triple-, quadruple-checked the manuscript: submit it via e-mail or online submission system. Along with your manuscript, submit a cover letter, which highlights the reasons why your paper would appeal to the journal and which ensures that you have received approval of all authors for submission.

It is up to the editors and the peer-reviewers now to provide you with their (ideally constructive and helpful) comments and feedback. Time to take a breather!

If the paper gets rejected, do not despair – it happens to literally everybody. If the journal suggests major or minor revisions, take the chance to provide a thorough response and make improvements as you see fit. If the paper gets accepted, congrats!

It’s now time to get writing and share your hard work – good luck!

If you are interested, check out this related blog post

[Title Image by Nick Morrison via Unsplash]

David Sleeman

David Sleeman worked as Senior Journals Manager in the field of Physical Sciences at De Gruyter.

You might also be interested in

Academia & Publishing

Taking Libraries into the Future, Part 1: An Interview with Mark Hughes

Library community gives back: 2023 webinar speakers’ charity picks, from error to excellence: embracing mistakes in library practice, visit our shop.

De Gruyter publishes over 1,300 new book titles each year and more than 750 journals in the humanities, social sciences, medicine, mathematics, engineering, computer sciences, natural sciences, and law.

Pin It on Pinterest

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Research paper

How to Write a Research Paper | A Beginner's Guide

A research paper is a piece of academic writing that provides analysis, interpretation, and argument based on in-depth independent research.

Research papers are similar to academic essays , but they are usually longer and more detailed assignments, designed to assess not only your writing skills but also your skills in scholarly research. Writing a research paper requires you to demonstrate a strong knowledge of your topic, engage with a variety of sources, and make an original contribution to the debate.

This step-by-step guide takes you through the entire writing process, from understanding your assignment to proofreading your final draft.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Understand the assignment, choose a research paper topic, conduct preliminary research, develop a thesis statement, create a research paper outline, write a first draft of the research paper, write the introduction, write a compelling body of text, write the conclusion, the second draft, the revision process, research paper checklist, free lecture slides.

Completing a research paper successfully means accomplishing the specific tasks set out for you. Before you start, make sure you thoroughly understanding the assignment task sheet:

• Read it carefully, looking for anything confusing you might need to clarify with your professor.
• Identify the assignment goal, deadline, length specifications, formatting, and submission method.
• Make a bulleted list of the key points, then go back and cross completed items off as you’re writing.

Carefully consider your timeframe and word limit: be realistic, and plan enough time to research, write, and edit.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

There are many ways to generate an idea for a research paper, from brainstorming with pen and paper to talking it through with a fellow student or professor.

You can try free writing, which involves taking a broad topic and writing continuously for two or three minutes to identify absolutely anything relevant that could be interesting.

You can also gain inspiration from other research. The discussion or recommendations sections of research papers often include ideas for other specific topics that require further examination.

Once you have a broad subject area, narrow it down to choose a topic that interests you, m eets the criteria of your assignment, and i s possible to research. Aim for ideas that are both original and specific:

• A paper following the chronology of World War II would not be original or specific enough.
• A paper on the experience of Danish citizens living close to the German border during World War II would be specific and could be original enough.

Note any discussions that seem important to the topic, and try to find an issue that you can focus your paper around. Use a variety of sources , including journals, books, and reliable websites, to ensure you do not miss anything glaring.

Do not only verify the ideas you have in mind, but look for sources that contradict your point of view.

• Is there anything people seem to overlook in the sources you research?
• Are there any heated debates you can address?
• Do you have a unique take on your topic?
• Have there been some recent developments that build on the extant research?

In this stage, you might find it helpful to formulate some research questions to help guide you. To write research questions, try to finish the following sentence: “I want to know how/what/why…”

A thesis statement is a statement of your central argument — it establishes the purpose and position of your paper. If you started with a research question, the thesis statement should answer it. It should also show what evidence and reasoning you’ll use to support that answer.

The thesis statement should be concise, contentious, and coherent. That means it should briefly summarize your argument in a sentence or two, make a claim that requires further evidence or analysis, and make a coherent point that relates to every part of the paper.

You will probably revise and refine the thesis statement as you do more research, but it can serve as a guide throughout the writing process. Every paragraph should aim to support and develop this central claim.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

A research paper outline is essentially a list of the key topics, arguments, and evidence you want to include, divided into sections with headings so that you know roughly what the paper will look like before you start writing.

A structure outline can help make the writing process much more efficient, so it’s worth dedicating some time to create one.

Your first draft won’t be perfect — you can polish later on. Your priorities at this stage are as follows:

• Maintaining forward momentum — write now, perfect later.
• Paying attention to clear organization and logical ordering of paragraphs and sentences, which will help when you come to the second draft.
• Expressing your ideas as clearly as possible, so you know what you were trying to say when you come back to the text.

You do not need to start by writing the introduction. Begin where it feels most natural for you — some prefer to finish the most difficult sections first, while others choose to start with the easiest part. If you created an outline, use it as a map while you work.

Do not delete large sections of text. If you begin to dislike something you have written or find it doesn’t quite fit, move it to a different document, but don’t lose it completely — you never know if it might come in useful later.

Paragraph structure

Paragraphs are the basic building blocks of research papers. Each one should focus on a single claim or idea that helps to establish the overall argument or purpose of the paper.

Example paragraph

George Orwell’s 1946 essay “Politics and the English Language” has had an enduring impact on thought about the relationship between politics and language. This impact is particularly obvious in light of the various critical review articles that have recently referenced the essay. For example, consider Mark Falcoff’s 2009 article in The National Review Online, “The Perversion of Language; or, Orwell Revisited,” in which he analyzes several common words (“activist,” “civil-rights leader,” “diversity,” and more). Falcoff’s close analysis of the ambiguity built into political language intentionally mirrors Orwell’s own point-by-point analysis of the political language of his day. Even 63 years after its publication, Orwell’s essay is emulated by contemporary thinkers.

Citing sources

It’s also important to keep track of citations at this stage to avoid accidental plagiarism . Each time you use a source, make sure to take note of where the information came from.

You can use our free citation generators to automatically create citations and save your reference list as you go.

APA Citation Generator MLA Citation Generator

The research paper introduction should address three questions: What, why, and how? After finishing the introduction, the reader should know what the paper is about, why it is worth reading, and how you’ll build your arguments.

What? Be specific about the topic of the paper, introduce the background, and define key terms or concepts.

Why? This is the most important, but also the most difficult, part of the introduction. Try to provide brief answers to the following questions: What new material or insight are you offering? What important issues does your essay help define or answer?

How? To let the reader know what to expect from the rest of the paper, the introduction should include a “map” of what will be discussed, briefly presenting the key elements of the paper in chronological order.

The major struggle faced by most writers is how to organize the information presented in the paper, which is one reason an outline is so useful. However, remember that the outline is only a guide and, when writing, you can be flexible with the order in which the information and arguments are presented.

One way to stay on track is to use your thesis statement and topic sentences . Check:

• topic sentences against the thesis statement;
• topic sentences against each other, for similarities and logical ordering;
• and each sentence against the topic sentence of that paragraph.

Be aware of paragraphs that seem to cover the same things. If two paragraphs discuss something similar, they must approach that topic in different ways. Aim to create smooth transitions between sentences, paragraphs, and sections.

The research paper conclusion is designed to help your reader out of the paper’s argument, giving them a sense of finality.

Trace the course of the paper, emphasizing how it all comes together to prove your thesis statement. Give the paper a sense of finality by making sure the reader understands how you’ve settled the issues raised in the introduction.

You might also discuss the more general consequences of the argument, outline what the paper offers to future students of the topic, and suggest any questions the paper’s argument raises but cannot or does not try to answer.

You should not :

• Offer new arguments or essential information
• Take up any more space than necessary
• Begin with stock phrases that signal you are ending the paper (e.g. “In conclusion”)

There are four main considerations when it comes to the second draft.

• Check how your vision of the paper lines up with the first draft and, more importantly, that your paper still answers the assignment.
• Identify any assumptions that might require (more substantial) justification, keeping your reader’s perspective foremost in mind. Remove these points if you cannot substantiate them further.
• Be open to rearranging your ideas. Check whether any sections feel out of place and whether your ideas could be better organized.
• If you find that old ideas do not fit as well as you anticipated, you should cut them out or condense them. You might also find that new and well-suited ideas occurred to you during the writing of the first draft — now is the time to make them part of the paper.

The goal during the revision and proofreading process is to ensure you have completed all the necessary tasks and that the paper is as well-articulated as possible. You can speed up the proofreading process by using the AI proofreader .

Global concerns

• Confirm that your paper completes every task specified in your assignment sheet.
• Check for logical organization and flow of paragraphs.
• Check paragraphs against the introduction and thesis statement.

Fine-grained details

Check the content of each paragraph, making sure that:

• each sentence helps support the topic sentence.
• no unnecessary or irrelevant information is present.
• all technical terms your audience might not know are identified.

Next, think about sentence structure , grammatical errors, and formatting . Check that you have correctly used transition words and phrases to show the connections between your ideas. Look for typos, cut unnecessary words, and check for consistency in aspects such as heading formatting and spellings .

Finally, you need to make sure your paper is correctly formatted according to the rules of the citation style you are using. For example, you might need to include an MLA heading  or create an APA title page .

Scribbr’s professional editors can help with the revision process with our award-winning proofreading services.

Discover our paper editing service

Checklist: Research paper

I have followed all instructions in the assignment sheet.

My introduction presents my topic in an engaging way and provides necessary background information.

My introduction presents a clear, focused research problem and/or thesis statement .

My paper is logically organized using paragraphs and (if relevant) section headings .

Each paragraph is clearly focused on one central idea, expressed in a clear topic sentence .

Each paragraph is relevant to my research problem or thesis statement.

I have used appropriate transitions  to clarify the connections between sections, paragraphs, and sentences.

My conclusion provides a concise answer to the research question or emphasizes how the thesis has been supported.

My conclusion shows how my research has contributed to knowledge or understanding of my topic.

My conclusion does not present any new points or information essential to my argument.

I have provided an in-text citation every time I refer to ideas or information from a source.

I have included a reference list at the end of my paper, consistently formatted according to a specific citation style .

I have thoroughly revised my paper and addressed any feedback from my professor or supervisor.

I have followed all formatting guidelines (page numbers, headers, spacing, etc.).

You've written a great paper. Make sure it's perfect with the help of a Scribbr editor!

Open Google Slides Download PowerPoint

Is this article helpful?

Other students also liked.

• Writing a Research Paper Introduction | Step-by-Step Guide
• Writing a Research Paper Conclusion | Step-by-Step Guide
• Research Paper Format | APA, MLA, & Chicago Templates

More interesting articles

• Academic Paragraph Structure | Step-by-Step Guide & Examples
• Checklist: Writing a Great Research Paper
• How to Create a Structured Research Paper Outline | Example
• How to Write a Discussion Section | Tips & Examples
• How to Write Recommendations in Research | Examples & Tips
• How to Write Topic Sentences | 4 Steps, Examples & Purpose
• Research Paper Appendix | Example & Templates
• Research Paper Damage Control | Managing a Broken Argument
• What Is a Theoretical Framework? | Guide to Organizing

"I thought AI Proofreading was useless but.."

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List

How to Write and Publish a Research Paper for a Peer-Reviewed Journal

Clara busse.

1 Department of Maternal and Child Health, University of North Carolina Gillings School of Global Public Health, 135 Dauer Dr, 27599 Chapel Hill, NC USA

Ella August

2 Department of Epidemiology, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI 48109-2029 USA

Associated Data

Communicating research findings is an essential step in the research process. Often, peer-reviewed journals are the forum for such communication, yet many researchers are never taught how to write a publishable scientific paper. In this article, we explain the basic structure of a scientific paper and describe the information that should be included in each section. We also identify common pitfalls for each section and recommend strategies to avoid them. Further, we give advice about target journal selection and authorship. In the online resource 1 , we provide an example of a high-quality scientific paper, with annotations identifying the elements we describe in this article.

Electronic supplementary material

The online version of this article (10.1007/s13187-020-01751-z) contains supplementary material, which is available to authorized users.

Introduction

Writing a scientific paper is an important component of the research process, yet researchers often receive little formal training in scientific writing. This is especially true in low-resource settings. In this article, we explain why choosing a target journal is important, give advice about authorship, provide a basic structure for writing each section of a scientific paper, and describe common pitfalls and recommendations for each section. In the online resource 1 , we also include an annotated journal article that identifies the key elements and writing approaches that we detail here. Before you begin your research, make sure you have ethical clearance from all relevant ethical review boards.

Select a Target Journal Early in the Writing Process

We recommend that you select a “target journal” early in the writing process; a “target journal” is the journal to which you plan to submit your paper. Each journal has a set of core readers and you should tailor your writing to this readership. For example, if you plan to submit a manuscript about vaping during pregnancy to a pregnancy-focused journal, you will need to explain what vaping is because readers of this journal may not have a background in this topic. However, if you were to submit that same article to a tobacco journal, you would not need to provide as much background information about vaping.

Information about a journal’s core readership can be found on its website, usually in a section called “About this journal” or something similar. For example, the Journal of Cancer Education presents such information on the “Aims and Scope” page of its website, which can be found here: https://www.springer.com/journal/13187/aims-and-scope .

Peer reviewer guidelines from your target journal are an additional resource that can help you tailor your writing to the journal and provide additional advice about crafting an effective article [ 1 ]. These are not always available, but it is worth a quick web search to find out.

Identify Author Roles Early in the Process

Early in the writing process, identify authors, determine the order of authors, and discuss the responsibilities of each author. Standard author responsibilities have been identified by The International Committee of Medical Journal Editors (ICMJE) [ 2 ]. To set clear expectations about each team member’s responsibilities and prevent errors in communication, we also suggest outlining more detailed roles, such as who will draft each section of the manuscript, write the abstract, submit the paper electronically, serve as corresponding author, and write the cover letter. It is best to formalize this agreement in writing after discussing it, circulating the document to the author team for approval. We suggest creating a title page on which all authors are listed in the agreed-upon order. It may be necessary to adjust authorship roles and order during the development of the paper. If a new author order is agreed upon, be sure to update the title page in the manuscript draft.

In the case where multiple papers will result from a single study, authors should discuss who will author each paper. Additionally, authors should agree on a deadline for each paper and the lead author should take responsibility for producing an initial draft by this deadline.

Structure of the Introduction Section

The introduction section should be approximately three to five paragraphs in length. Look at examples from your target journal to decide the appropriate length. This section should include the elements shown in Fig.  1 . Begin with a general context, narrowing to the specific focus of the paper. Include five main elements: why your research is important, what is already known about the topic, the “gap” or what is not yet known about the topic, why it is important to learn the new information that your research adds, and the specific research aim(s) that your paper addresses. Your research aim should address the gap you identified. Be sure to add enough background information to enable readers to understand your study. Table ​ Table1 1 provides common introduction section pitfalls and recommendations for addressing them.

The main elements of the introduction section of an original research article. Often, the elements overlap

Common introduction section pitfalls and recommendations

Methods Section

The purpose of the methods section is twofold: to explain how the study was done in enough detail to enable its replication and to provide enough contextual detail to enable readers to understand and interpret the results. In general, the essential elements of a methods section are the following: a description of the setting and participants, the study design and timing, the recruitment and sampling, the data collection process, the dataset, the dependent and independent variables, the covariates, the analytic approach for each research objective, and the ethical approval. The hallmark of an exemplary methods section is the justification of why each method was used. Table ​ Table2 2 provides common methods section pitfalls and recommendations for addressing them.

Common methods section pitfalls and recommendations

Results Section

The focus of the results section should be associations, or lack thereof, rather than statistical tests. Two considerations should guide your writing here. First, the results should present answers to each part of the research aim. Second, return to the methods section to ensure that the analysis and variables for each result have been explained.

Begin the results section by describing the number of participants in the final sample and details such as the number who were approached to participate, the proportion who were eligible and who enrolled, and the number of participants who dropped out. The next part of the results should describe the participant characteristics. After that, you may organize your results by the aim or by putting the most exciting results first. Do not forget to report your non-significant associations. These are still findings.

Tables and figures capture the reader’s attention and efficiently communicate your main findings [ 3 ]. Each table and figure should have a clear message and should complement, rather than repeat, the text. Tables and figures should communicate all salient details necessary for a reader to understand the findings without consulting the text. Include information on comparisons and tests, as well as information about the sample and timing of the study in the title, legend, or in a footnote. Note that figures are often more visually interesting than tables, so if it is feasible to make a figure, make a figure. To avoid confusing the reader, either avoid abbreviations in tables and figures, or define them in a footnote. Note that there should not be citations in the results section and you should not interpret results here. Table ​ Table3 3 provides common results section pitfalls and recommendations for addressing them.

Common results section pitfalls and recommendations

Discussion Section

Opposite the introduction section, the discussion should take the form of a right-side-up triangle beginning with interpretation of your results and moving to general implications (Fig.  2 ). This section typically begins with a restatement of the main findings, which can usually be accomplished with a few carefully-crafted sentences.

Major elements of the discussion section of an original research article. Often, the elements overlap

Next, interpret the meaning or explain the significance of your results, lifting the reader’s gaze from the study’s specific findings to more general applications. Then, compare these study findings with other research. Are these findings in agreement or disagreement with those from other studies? Does this study impart additional nuance to well-accepted theories? Situate your findings within the broader context of scientific literature, then explain the pathways or mechanisms that might give rise to, or explain, the results.

Journals vary in their approach to strengths and limitations sections: some are embedded paragraphs within the discussion section, while some mandate separate section headings. Keep in mind that every study has strengths and limitations. Candidly reporting yours helps readers to correctly interpret your research findings.

The next element of the discussion is a summary of the potential impacts and applications of the research. Should these results be used to optimally design an intervention? Does the work have implications for clinical protocols or public policy? These considerations will help the reader to further grasp the possible impacts of the presented work.

Finally, the discussion should conclude with specific suggestions for future work. Here, you have an opportunity to illuminate specific gaps in the literature that compel further study. Avoid the phrase “future research is necessary” because the recommendation is too general to be helpful to readers. Instead, provide substantive and specific recommendations for future studies. Table ​ Table4 4 provides common discussion section pitfalls and recommendations for addressing them.

Common discussion section pitfalls and recommendations

Follow the Journal’s Author Guidelines

After you select a target journal, identify the journal’s author guidelines to guide the formatting of your manuscript and references. Author guidelines will often (but not always) include instructions for titles, cover letters, and other components of a manuscript submission. Read the guidelines carefully. If you do not follow the guidelines, your article will be sent back to you.

Finally, do not submit your paper to more than one journal at a time. Even if this is not explicitly stated in the author guidelines of your target journal, it is considered inappropriate and unprofessional.

Your title should invite readers to continue reading beyond the first page [ 4 , 5 ]. It should be informative and interesting. Consider describing the independent and dependent variables, the population and setting, the study design, the timing, and even the main result in your title. Because the focus of the paper can change as you write and revise, we recommend you wait until you have finished writing your paper before composing the title.

Be sure that the title is useful for potential readers searching for your topic. The keywords you select should complement those in your title to maximize the likelihood that a researcher will find your paper through a database search. Avoid using abbreviations in your title unless they are very well known, such as SNP, because it is more likely that someone will use a complete word rather than an abbreviation as a search term to help readers find your paper.

After you have written a complete draft, use the checklist (Fig. ​ (Fig.3) 3 ) below to guide your revisions and editing. Additional resources are available on writing the abstract and citing references [ 5 ]. When you feel that your work is ready, ask a trusted colleague or two to read the work and provide informal feedback. The box below provides a checklist that summarizes the key points offered in this article.

Checklist for manuscript quality

(PDF 362 kb)

Acknowledgments

Ella August is grateful to the Sustainable Sciences Institute for mentoring her in training researchers on writing and publishing their research.

Code Availability

Not applicable.

Data Availability

Compliance with ethical standards.

The authors declare that they have no conflict of interest.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections

Welcome to the PLOS Writing Center

Your source for scientific writing & publishing essentials.

A collection of free, practical guides and hands-on resources for authors looking to improve their scientific publishing skillset.

ARTICLE-WRITING ESSENTIALS

Your title is the first thing anyone who reads your article is going to see, and for many it will be where they stop reading. Learn how to write a title that helps readers find your article, draws your audience in and sets the stage for your research!

The abstract is your chance to let your readers know what they can expect from your article. Learn how to write a clear, and concise abstract that will keep your audience reading.

A clear methods section impacts editorial evaluation and readers’ understanding, and is also the backbone of transparency and replicability. Learn what to include in your methods section, and how much detail is appropriate.

In many fields, a statistical analysis forms the heart of both the methods and results sections of a manuscript. Learn how to report statistical analyses, and what other context is important for publication success and future reproducibility.

The discussion section contains the results and outcomes of a study. An effective discussion informs readers what can be learned from your experiment and provides context for the results.

Ensuring your manuscript is well-written makes it easier for editors, reviewers and readers to understand your work. Avoiding language errors can help accelerate review and minimize delays in the publication of your research.

The PLOS Writing Toolbox

Delivered to your inbox every two weeks, the Writing Toolbox features practical advice and tools you can use to prepare a research manuscript for submission success and build your scientific writing skillset. 

Discover how to navigate the peer review and publishing process, beyond writing your article.

The path to publication can be unsettling when you’re unsure what’s happening with your paper. Learn about staple journal workflows to see the detailed steps required for ensuring a rigorous and ethical publication.

Reputable journals screen for ethics at submission—and inability to pass ethics checks is one of the most common reasons for rejection. Unfortunately, once a study has begun, it’s often too late to secure the requisite ethical reviews and clearances. Learn how to prepare for publication success by ensuring your study meets all ethical requirements before work begins.

From preregistration, to preprints, to publication—learn how and when to share your study.

How you store your data matters. Even after you publish your article, your data needs to be accessible and useable for the long term so that other researchers can continue building on your work. Good data management practices make your data discoverable and easy to use, promote a strong foundation for reproducibility and increase your likelihood of citations.

You’ve just spent months completing your study, writing up the results and submitting to your top-choice journal. Now the feedback is in and it’s time to revise. Set out a clear plan for your response to keep yourself on-track and ensure edits don’t fall through the cracks.

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher.

Are you actively preparing a submission for a PLOS journal? Select the relevant journal below for more detailed guidelines. 

How to Write an Article  

Share the lessons of the Writing Center in a live, interactive training.

Access tried-and-tested training modules, complete with slides and talking points, workshop activities, and more.

Home → Get Published → How to Publish a Research Paper: A Step-by-Step Guide

How to Publish a Research Paper: A Step-by-Step Guide

Jordan Kruszynski

• January 4, 2024

You’re in academia.

You’re going steady.

Your research is going well and you begin to wonder: ‘ How exactly do I get a research paper published?’

If this is the question on your lips, then this step-by-step guide is the one for you. We’ll be walking you through the whole process of how to publish a research paper.

Publishing a research paper is a significant milestone for researchers and academics, as it allows you to share your findings, contribute to your field of study, and start to gain serious recognition within the wider academic community. So, want to know how to publish a research paper? By following our guide, you’ll get a firm grasp of the steps involved in this process, giving you the best chance of successfully navigating the publishing process and getting your work out there.

Understanding the Publishing Process

To begin, it’s crucial to understand that getting a research paper published is a multi-step process. From beginning to end, it could take as little as 2 months before you see your paper nestled in the pages of your chosen journal. On the other hand, it could take as long as a year .

Below, we set out the steps before going into more detail on each one. Getting a feel for these steps will help you to visualise what lies ahead, and prepare yourself for each of them in turn. It’s important to remember that you won’t actually have control over every step – in fact, some of them will be decided by people you’ll probably never meet. However, knowing which parts of the process are yours to decide will allow you to adjust your approach and attitude accordingly.

Each of the following stages will play a vital role in the eventual publication of your paper:

• Preparing Your Research Paper
• Finding the Right Journal
• Crafting a Strong Manuscript
• Navigating the Peer-Review Process
• Submitting Your Paper
• Dealing with Rejections and Revising Your Paper

Step 1: Preparing Your Research Paper

It all starts here. The quality and content of your research paper is of fundamental importance if you want to get it published. This step will be different for every researcher depending on the nature of your research, but if you haven’t yet settled on a topic, then consider the following advice:

• Choose an interesting and relevant topic that aligns with current trends in your field. If your research touches on the passions and concerns of your academic peers or wider society, it may be more likely to capture attention and get published successfully.
• Conduct a comprehensive literature review (link to lit. review article once it’s published) to identify the state of existing research and any knowledge gaps within it. Aiming to fill a clear gap in the knowledge of your field is a great way to increase the practicality of your research and improve its chances of getting published.
• Structure your paper in a clear and organised manner, including all the necessary sections such as title, abstract, introduction (link to the ‘how to write a research paper intro’ article once it’s published) , methodology, results, discussion, and conclusion.
• Adhere to the formatting guidelines provided by your target journal to ensure that your paper is accepted as viable for publishing. More on this in the next section…

Step 2: Finding the Right Journal

Understanding how to publish a research paper involves selecting the appropriate journal for your work. This step is critical for successful publication, and you should take several factors into account when deciding which journal to apply for:

• Conduct thorough research to identify journals that specialise in your field of study and have published similar research. Naturally, if you submit a piece of research in molecular genetics to a journal that specialises in geology, you won’t be likely to get very far.
• Consider factors such as the journal’s scope, impact factor, and target audience. Today there is a wide array of journals to choose from, including traditional and respected print journals, as well as numerous online, open-access endeavours. Some, like Nature , even straddle both worlds.
• Review the submission guidelines provided by the journal and ensure your paper meets all the formatting requirements and word limits. This step is key. Nature, for example, offers a highly informative series of pages that tells you everything you need to know in order to satisfy their formatting guidelines (plus more on the whole submission process).
• Note that these guidelines can differ dramatically from journal to journal, and details really do matter. You might submit an outstanding piece of research, but if it includes, for example, images in the wrong size or format, this could mean a lengthy delay to getting it published. If you get everything right first time, you’ll save yourself a lot of time and trouble, as well as strengthen your publishing chances in the first place.

Step 3: Crafting a Strong Manuscript

Crafting a strong manuscript is crucial to impress journal editors and reviewers. Look at your paper as a complete package, and ensure that all the sections tie together to deliver your findings with clarity and precision.

• Begin by creating a clear and concise title that accurately reflects the content of your paper.
• Compose an informative abstract that summarises the purpose, methodology, results, and significance of your study.
• Craft an engaging introduction (link to the research paper introduction article) that draws your reader in.
• Develop a well-structured methodology section, presenting your results effectively using tables and figures.
• Write a compelling discussion and conclusion that emphasise the significance of your findings.

Step 4: Navigating the Peer-Review Process

Once you submit your research paper to a journal, it undergoes a rigorous peer-review process to ensure its quality and validity. In peer-review, experts in your field assess your research and provide feedback and suggestions for improvement, ultimately determining whether your paper is eligible for publishing or not. You are likely to encounter several models of peer-review, based on which party – author, reviewer, or both – remains anonymous throughout the process.

When your paper undergoes the peer-review process, be prepared for constructive criticism and address the comments you receive from your reviewer thoughtfully, providing clear and concise responses to their concerns or suggestions. These could make all the difference when it comes to making your next submission.

The peer-review process can seem like a closed book at times. Check out our discussion of the issue with philosopher and academic Amna Whiston in The Research Beat podcast!

Step 5: Submitting Your Paper

As we’ve already pointed out, one of the key elements in how to publish a research paper is ensuring that you meticulously follow the journal’s submission guidelines. Strive to comply with all formatting requirements, including citation styles, font, margins, and reference structure.

Before the final submission, thoroughly proofread your paper for errors, including grammar, spelling, and any inconsistencies in your data or analysis. At this stage, consider seeking feedback from colleagues or mentors to further improve the quality of your paper.

Step 6: Dealing with Rejections and Revising Your Paper

Rejection is a common part of the publishing process, but it shouldn’t discourage you. Analyse reviewer comments objectively and focus on the constructive feedback provided. Make necessary revisions and improvements to your paper to address the concerns raised by reviewers. If needed, consider submitting your paper to a different journal that is a better fit for your research.

For more tips on how to publish your paper out there, check out this thread by Dr. Asad Naveed ( @dr_asadnaveed ) – and if you need a refresher on the basics of how to publish under the Open Access model, watch this 5-minute video from Audemic Academy !

Final Thoughts

Successfully understanding how to publish a research paper requires dedication, attention to detail, and a systematic approach. By following the advice in our guide, you can increase your chances of navigating the publishing process effectively and achieving your goal of publication.

Remember, the journey may involve revisions, peer feedback, and potential rejections, but each step is an opportunity for growth and improvement. Stay persistent, maintain a positive mindset, and continue to refine your research paper until it reaches the standards of your target journal. Your contribution to your wider discipline through published research will not only advance your career, but also add to the growing body of collective knowledge in your field. Embrace the challenges and rewards that come with the publication process, and may your research paper make a significant impact in your area of study!

Looking for inspiration for your next big paper? Head to Audemic , where you can organise and listen to all the best and latest research in your field!

Keep striving, researchers! ✨

Table of Contents

Related articles.

You’re in academia. You’re going steady. Your research is going well and you begin to wonder: ‘How exactly do I get a

Behind the Scenes: What Does a Research Assistant Do?

Have you ever wondered what goes on behind the scenes in a research lab? Does it involve acting out the whims of

How to Write a Research Paper Introduction: Hook, Line, and Sinker

Want to know how to write a research paper introduction that dazzles? Struggling to hook your reader in with your opening sentences?

Blog Podcast

Privacy policy Terms of service

Subscribe to our newsletter!

Discover more from Audemic: Access any academic research via audio

Subscribe now to keep reading and get access to the full archive.

Type your email…

Continue reading

• Search Menu
• Sign in through your institution
• Advance articles
• Editor's Choice
• Supplements
• French Abstracts
• Portuguese Abstracts
• Spanish Abstracts
• Author Guidelines
• Submission Site
• Open Access
• About International Journal for Quality in Health Care
• About the International Society for Quality in Health Care
• Editorial Board
• Advertising and Corporate Services
• Journals Career Network
• Self-Archiving Policy
• Dispatch Dates
• Contact ISQua
• Journals on Oxford Academic
• Books on Oxford Academic

Article Contents

Primacy of the research question, structure of the paper, writing a research article: advice to beginners.

• Article contents
• Figures & tables
• Supplementary Data

Thomas V. Perneger, Patricia M. Hudelson, Writing a research article: advice to beginners, International Journal for Quality in Health Care , Volume 16, Issue 3, June 2004, Pages 191–192, https://doi.org/10.1093/intqhc/mzh053

• Permissions Icon Permissions

Writing research papers does not come naturally to most of us. The typical research paper is a highly codified rhetorical form [ 1 , 2 ]. Knowledge of the rules—some explicit, others implied—goes a long way toward writing a paper that will get accepted in a peer-reviewed journal.

A good research paper addresses a specific research question. The research question—or study objective or main research hypothesis—is the central organizing principle of the paper. Whatever relates to the research question belongs in the paper; the rest doesn’t. This is perhaps obvious when the paper reports on a well planned research project. However, in applied domains such as quality improvement, some papers are written based on projects that were undertaken for operational reasons, and not with the primary aim of producing new knowledge. In such cases, authors should define the main research question a posteriori and design the paper around it.

Generally, only one main research question should be addressed in a paper (secondary but related questions are allowed). If a project allows you to explore several distinct research questions, write several papers. For instance, if you measured the impact of obtaining written consent on patient satisfaction at a specialized clinic using a newly developed questionnaire, you may want to write one paper on the questionnaire development and validation, and another on the impact of the intervention. The idea is not to split results into ‘least publishable units’, a practice that is rightly decried, but rather into ‘optimally publishable units’.

What is a good research question? The key attributes are: (i) specificity; (ii) originality or novelty; and (iii) general relevance to a broad scientific community. The research question should be precise and not merely identify a general area of inquiry. It can often (but not always) be expressed in terms of a possible association between X and Y in a population Z, for example ‘we examined whether providing patients about to be discharged from the hospital with written information about their medications would improve their compliance with the treatment 1 month later’. A study does not necessarily have to break completely new ground, but it should extend previous knowledge in a useful way, or alternatively refute existing knowledge. Finally, the question should be of interest to others who work in the same scientific area. The latter requirement is more challenging for those who work in applied science than for basic scientists. While it may safely be assumed that the human genome is the same worldwide, whether the results of a local quality improvement project have wider relevance requires careful consideration and argument.

Once the research question is clearly defined, writing the paper becomes considerably easier. The paper will ask the question, then answer it. The key to successful scientific writing is getting the structure of the paper right. The basic structure of a typical research paper is the sequence of Introduction, Methods, Results, and Discussion (sometimes abbreviated as IMRAD). Each section addresses a different objective. The authors state: (i) the problem they intend to address—in other terms, the research question—in the Introduction; (ii) what they did to answer the question in the Methods section; (iii) what they observed in the Results section; and (iv) what they think the results mean in the Discussion.

In turn, each basic section addresses several topics, and may be divided into subsections (Table 1 ). In the Introduction, the authors should explain the rationale and background to the study. What is the research question, and why is it important to ask it? While it is neither necessary nor desirable to provide a full-blown review of the literature as a prelude to the study, it is helpful to situate the study within some larger field of enquiry. The research question should always be spelled out, and not merely left for the reader to guess.

Typical structure of a research paper

The Methods section should provide the readers with sufficient detail about the study methods to be able to reproduce the study if so desired. Thus, this section should be specific, concrete, technical, and fairly detailed. The study setting, the sampling strategy used, instruments, data collection methods, and analysis strategies should be described. In the case of qualitative research studies, it is also useful to tell the reader which research tradition the study utilizes and to link the choice of methodological strategies with the research goals [ 3 ].

The Results section is typically fairly straightforward and factual. All results that relate to the research question should be given in detail, including simple counts and percentages. Resist the temptation to demonstrate analytic ability and the richness of the dataset by providing numerous tables of non-essential results.

The Discussion section allows the most freedom. This is why the Discussion is the most difficult to write, and is often the weakest part of a paper. Structured Discussion sections have been proposed by some journal editors [ 4 ]. While strict adherence to such rules may not be necessary, following a plan such as that proposed in Table 1 may help the novice writer stay on track.

References should be used wisely. Key assertions should be referenced, as well as the methods and instruments used. However, unless the paper is a comprehensive review of a topic, there is no need to be exhaustive. Also, references to unpublished work, to documents in the grey literature (technical reports), or to any source that the reader will have difficulty finding or understanding should be avoided.

Having the structure of the paper in place is a good start. However, there are many details that have to be attended to while writing. An obvious recommendation is to read, and follow, the instructions to authors published by the journal (typically found on the journal’s website). Another concerns non-native writers of English: do have a native speaker edit the manuscript. A paper usually goes through several drafts before it is submitted. When revising a paper, it is useful to keep an eye out for the most common mistakes (Table 2 ). If you avoid all those, your paper should be in good shape.

Common mistakes seen in manuscripts submitted to this journal

Huth EJ . How to Write and Publish Papers in the Medical Sciences , 2nd edition. Baltimore, MD: Williams & Wilkins, 1990 .

Browner WS . Publishing and Presenting Clinical Research . Baltimore, MD: Lippincott, Williams & Wilkins, 1999 .

Devers KJ , Frankel RM. Getting qualitative research published. Educ Health 2001 ; 14 : 109 –117.

Docherty M , Smith R. The case for structuring the discussion of scientific papers. Br Med J 1999 ; 318 : 1224 –1225.

Email alerts

Citing articles via.

• Recommend to your Library

Affiliations

• Online ISSN 1464-3677
• Print ISSN 1353-4505
• Copyright © 2024 International Society for Quality in Health Care and Oxford University Press
• About Oxford Academic
• Publish journals with us
• University press partners
• What we publish
• New features  
• Open access
• Institutional account management
• Rights and permissions
• Get help with access
• Accessibility
• Advertising
• Media enquiries
• Oxford University Press
• Oxford Languages
• University of Oxford

Oxford University Press is a department of the University of Oxford. It furthers the University's objective of excellence in research, scholarship, and education by publishing worldwide

• Copyright © 2024 Oxford University Press
• Cookie settings
• Cookie policy
• Privacy policy
• Legal notice

This Feature Is Available To Subscribers Only

Sign In or Create an Account

This PDF is available to Subscribers Only

For full access to this pdf, sign in to an existing account, or purchase an annual subscription.

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings
• My Bibliography
• Collections
• Citation manager

Save citation to file

Email citation, add to collections.

• Create a new collection
• Add to an existing collection

Add to My Bibliography

Your saved search, create a file for external citation management software, your rss feed.

• Search in PubMed
• Search in NLM Catalog
• Add to Search

How to Write and Publish a Research Paper for a Peer-Reviewed Journal

Affiliations.

• 1 Department of Maternal and Child Health, University of North Carolina Gillings School of Global Public Health, 135 Dauer Dr, 27599, Chapel Hill, NC, USA.
• 2 Department of Maternal and Child Health, University of North Carolina Gillings School of Global Public Health, 135 Dauer Dr, 27599, Chapel Hill, NC, USA. [email protected].
• 3 Department of Epidemiology, University of Michigan School of Public Health, 1415 Washington Heights, Ann Arbor, MI, 48109-2029, USA. [email protected].
• PMID: 32356250
• PMCID: PMC8520870
• DOI: 10.1007/s13187-020-01751-z

Communicating research findings is an essential step in the research process. Often, peer-reviewed journals are the forum for such communication, yet many researchers are never taught how to write a publishable scientific paper. In this article, we explain the basic structure of a scientific paper and describe the information that should be included in each section. We also identify common pitfalls for each section and recommend strategies to avoid them. Further, we give advice about target journal selection and authorship. In the online resource 1, we provide an example of a high-quality scientific paper, with annotations identifying the elements we describe in this article.

Keywords: Manuscripts; Publishing; Scientific writing.

© 2020. The Author(s).

PubMed Disclaimer

Conflict of interest statement

The authors declare that they have no conflict of interest.

The main elements of the…

The main elements of the introduction section of an original research article. Often,…

Major elements of the discussion…

Major elements of the discussion section of an original research article. Often, the…

Checklist for manuscript quality

Similar articles

• Publishing particulars: Part 1. The big picture. Seals DR. Seals DR. Am J Physiol Regul Integr Comp Physiol. 2023 Mar 1;324(3):R381-R392. doi: 10.1152/ajpregu.00265.2022. Epub 2023 Feb 7. Am J Physiol Regul Integr Comp Physiol. 2023. PMID: 36749295
• Writing biomedical manuscripts part I: fundamentals and general rules. Ohwovoriole AE. Ohwovoriole AE. West Afr J Med. 2011 May-Jun;30(3):151-7. West Afr J Med. 2011. PMID: 22120477 Review.
• Strategies to successfully publish your first manuscript. Veness M. Veness M. J Med Imaging Radiat Oncol. 2010 Aug;54(4):395-400. doi: 10.1111/j.1754-9485.2010.02186.x. J Med Imaging Radiat Oncol. 2010. PMID: 20718922
• [Preparing a manuscript for publication in a scientific journal]. Claes L, Rosenbaum D. Claes L, et al. Unfallchirurg. 1999 May;102(5):377-83. doi: 10.1007/s001130050421. Unfallchirurg. 1999. PMID: 10409911 Review. German.
• How to write and publish scientific papers: scribing information for pharmacists. Hamilton CW. Hamilton CW. Am J Hosp Pharm. 1992 Oct;49(10):2477-84. Am J Hosp Pharm. 1992. PMID: 1442826
• Writing a manuscript for publication in a peer-reviewed scientific journal: Guidance from the European Society of Clinical Pharmacy. Wirth F, Cadogan CA, Fialová D, Hazen A, Lutters M, Paudyal V, Weidmann AE, Okuyan B, Henman MC. Wirth F, et al. Int J Clin Pharm. 2024 Apr;46(2):548-554. doi: 10.1007/s11096-023-01695-6. Epub 2024 Feb 8. Int J Clin Pharm. 2024. PMID: 38332208 Free PMC article.
• Lessons learnt from a scientific peer-review training programme designed to support research capacity and professional development in a global community. Buser JM, Morris KL, Millicent Dzomeku V, Endale T, Smith YR, August E. Buser JM, et al. BMJ Glob Health. 2023 Apr;8(4):e012224. doi: 10.1136/bmjgh-2023-012224. BMJ Glob Health. 2023. PMID: 37185299 Free PMC article.
• A guide to backward paper writing for the data sciences. Zelner J, Broen K, August E. Zelner J, et al. Patterns (N Y). 2022 Jan 3;3(3):100423. doi: 10.1016/j.patter.2021.100423. eCollection 2022 Mar 11. Patterns (N Y). 2022. PMID: 35510182 Free PMC article. Review.
• Practical guide for the use of medical evidence in scientific publication: Recommendations for the medical student: Narrative review. Lozada-Martínez ID, Acevedo-Aguilar LM, Mass-Hernández LM, Matta-Rodríguez D, Jiménez-Filigrana JA, Garzón-Gutiérrez KE, Barahona-Botache SA, Vásquez-Castañeda DL, Caicedo-Giraldo SDR, Rahman S. Lozada-Martínez ID, et al. Ann Med Surg (Lond). 2021 Oct 9;71:102932. doi: 10.1016/j.amsu.2021.102932. eCollection 2021 Nov. Ann Med Surg (Lond). 2021. PMID: 34659747 Free PMC article. Review.
• Michalek AM. Down the rabbit hole…advice to reviewers. J Cancer Educ. 2014;29:4–5. doi: 10.1007/s13187-013-0602-x. - DOI - PubMed
• International Committee of Medical Journal Editors. Defining the role of authors and contributors: who is an author? http://www.icmje.org/recommendations/browse/roles-and-responsibilities/d... . Accessed 15 January, 2020
• Vetto JT. Short and sweet: a short course on concise medical writing. J Cancer Educ. 2014;29(1):194–195. doi: 10.1007/s13187-013-0584-8. - DOI - PubMed
• Brett M, Kording K (2017) Ten simple rules for structuring papers. PLoS ComputBiol. 10.1371/journal.pcbi.1005619 - PMC - PubMed
• Lang TA (2017) Writing a better research article. J Public Health Emerg. 10.21037/jphe.2017.11.06
• Search in MeSH

Related information

Linkout - more resources, full text sources.

• Europe PubMed Central
• PubMed Central
• Citation Manager

NCBI Literature Resources

MeSH PMC Bookshelf Disclaimer

The PubMed wordmark and PubMed logo are registered trademarks of the U.S. Department of Health and Human Services (HHS). Unauthorized use of these marks is strictly prohibited.

How to publish your research

A step-by-step guide to getting published.

Publishing your research is an important step in your academic career. While there isn’t a one-size-fits-all approach, this guide is designed to take you through the typical steps in publishing a research paper.

Discover how to get your paper published, from choosing the right journal and understanding what a peer reviewed article is, to responding to reviewers and navigating the production process.

Step 1: Choosing a journal

Choosing which journal to publish your research paper in is one of the most significant decisions you have to make as a researcher. Where you decide to submit your work can make a big difference to the reach and impact your research has.

It’s important to take your time to consider your options carefully and analyze each aspect of journal submission – from shortlisting titles to your preferred method of publication, for example open access .

Don’t forget to think about publishing options beyond the traditional journals format – for example, open research platform F1000Research , which offers rapid, open publication for a wide range of outputs.

Why choose your target journal before you start writing?

The first step in publishing a research paper should always be selecting the journal you want to publish in. Choosing your target journal before you start writing means you can tailor your work to build on research that’s already been published in that journal. This can help editors to see how a paper adds to the ‘conversation’ in their journal.

In addition, many journals only accept specific manuscript formats of article. So, by choosing a journal before you start, you can write your article to their specifications and audience, and ultimately improve your chances of acceptance.

To save time and for peace of mind, you can consider using manuscript formatting experts while you focus on your research.

How to select the journal to publish your research in

Choosing which journal to publish your research in can seem like an overwhelming task. So, for all the details of how to navigate this important step in publishing your research paper, take a look at our choosing a journal guide . This will take you through the selection process, from understanding the aims and scope of the journals you’re interested in to making sure you choose a trustworthy journal.

Don’t forget to explore our Journal Suggester to see which Taylor & Francis journals could be right for your research.

Go to guidance on choosing a journal

Step 2: Writing your paper

Writing an effective, compelling research paper  is vital to getting your research published. But if you’re new to putting together academic papers, it can feel daunting to start from scratch.

The good news is that if you’ve chosen the journal you want to publish in, you’ll have lots of examples already published in that journal to base your own paper on. We’ve gathered advice on every aspect of writing your paper, to make sure you get off to a great start.

How to write your paper

How you write your paper will depend on your chosen journal, your subject area, and the type of paper you’re writing. Everything from the style and structure you choose to the audience you should have in mind while writing will differ, so it’s important to think about these things before you get stuck in.

Our  writing your paper guidance  will take you through everything you need to know to put together your research article and prepare it for submission. This includes getting to know your target journal, understanding your audiences, and how to choose appropriate keywords.

You can also use this guide to take you through your research publication journey .

You should also make sure you’re aware of all the Editorial Policies  for the journal you plan to submit to. Don’t forget that you can contact our  editing services  to help you refine your manuscript.

Discover advice and guidance for writing your paper

Step 3: Making your submission

Once you’ve chosen the right journal and written your manuscript, the next step in publishing your research paper is  to make your submission .

Each journal will have specific submission requirements, so make sure you visit  Taylor & Francis Online  and carefully check through the  instructions for authors  for your chosen journal.

How to submit your manuscript

To submit your manuscript you’ll need to ensure that you’ve gone through all the steps in our  making your submission  guide. This includes thoroughly understanding your chosen journal’s instructions for authors, writing an effective cover letter, navigating the journal’s submission system, and making sure your research data is prepared as required.

You can also  improve your submission experience  with our guide to avoid obstacles and complete a seamless submission.

To make sure you’ve covered everything before you hit ‘submit’ you can also take a look at our  ‘ready to submit’ checklist  (don’t forget, you should only submit to one journal at a time).

Understand the process of making your submission

Step 4: Navigating the peer review process

Now you’ve submitted your manuscript, you need to get to grips with one of the most important parts of publishing your research paper –  the peer review process .

What is peer review?

Peer review is the independent assessment of your research article by independent experts in your field. Reviewers, also sometimes called ‘referees’, are asked to judge the validity, significance, and originality of your work.

This process ensures that a peer-reviewed article has been through a rigorous process to make sure the methodology is sound, the work can be replicated, and it fits with the aims and scope of the journal that is considering it for publication. It acts as an important form of quality control for research papers.

Peer review is also a very useful source of feedback, helping you to improve your paper before it’s published. It is intended to be a collaborative process, where authors engage in a dialogue with their peers and receive constructive feedback and support to advance their work.

Almost all research articles go through peer review, although in some cases the journal may operate post-publication peer review, which means that reviews and reader comments are invited after the paper is published.

If you’ll like to feel more confident before getting your work peer reviewed by the journal, you may want to consider using an  in-depth technical review service from experts.

Understanding peer review

Peer review can be a complex process to get your head around. That’s why we’ve put together a  comprehensive guide to understanding peer review . This explains everything from the many different types of peer review to the step-by-step peer review process and how to revise your manuscript. It also has helpful advice on what to do if your manuscript is rejected.

Visit our peer review guide for authors

Step 5: The production process

If your paper is accepted for publication, it will then head into  production . At this stage of the process, the paper will be prepared for publishing in your chosen journal.

A lot of the work to produce the final version of your paper will be done by the journal production team, but your input will be required at various stages of the process.

What do you need to do during production?

During production, you’ll have a variety of tasks to complete and decisions to make. For example, you’ll need to check and correct proofs of your article and consider whether or not you want to  produce a video abstract  to accompany it.

Take a look at  our guide to the production process  to find out what you’ll need to do in this final step to getting your research published.

Your research is published – now what?

You’ve successfully navigated publishing a research paper – congratulations! But the process doesn’t stop there. Now your research is published in a journal for the world to see, you’ll need to know  how to access your article  and  make sure it has an impact .

Here’s a  quick tip on how to boost your research impact  by investing in making your accomplishments stand out.

Below you’ll find helpful tips and post-publication support. From how to communicate about your research to how to request corrections or translations.

How to access your published article

When you publish with Taylor & Francis, you’ll have access to a new section on Taylor & Francis Online called  Authored Works . This will give you and all other named authors perpetual access to your article, regardless of whether or not you have a subscription to the journal you have published in.

You can also  order print copies of your article .

How to make sure your research has an impact

Taking the time to make sure your research has an impact can help drive your career progression, build your networks, and secure funding for new research. So, it’s worth investing in.

Creating a real impact with your work can be a challenging and time-consuming task, which can feel difficult to fit into an already demanding academic career.

To help you understand what impact means for you and your work, take a look at  our guide to research impact . It covers why impact is important, the different types of impact you can have, how to achieve impact – including tips on communicating with a variety of audiences – and how to measure your success.

Keeping track of your article’s progress

Through your  Authored Works access , you’ll be able to get real-time insights about your article, such as views, downloads and citation numbers.

In addition, when you publish an article with us, you’ll be offered the option to sign up for email updates. These emails will be sent to you three, six and twelve months after your article is published to let you know how many views and citations the article has had.

Corrections and translations of published articles

Sometimes after an article has been published it may be necessary to make a change to the  Version of Record . Take a look at our dedicated  guide to corrections, expressions of concern, retractions and removals  to find out more.

You may also be interested in translating your article into another language. If that’s the case, take a look at our  information on article translations .

Go to your guide on moving through production

Explore related posts

Insights topic: Get published

5 practical tips for writing an academic article 

5 ways to avoid the wrong journal and find the right one

5 key benefits of using an academic editing service

Our websites may use cookies to personalize and enhance your experience. By continuing without changing your cookie settings, you agree to this collection. For more information, please see our University Websites Privacy Notice .

Office of Undergraduate Research

Writing an academic paper as an undergraduate researcher, by ariane garrett, our peer research ambassador.

Publishing papers is the primary way that scientific knowledge is disseminated within the academic community. Therefore an essential part of becoming a successful researcher is learning how to write an academic paper. Throughout your undergraduate research career you may or may not have the opportunity to be published. Regardless, learning how academic papers are written is useful knowledge for anyone interested in pursuing a research career. Whether or not you have the opportunity to be published as an undergrad depends on a variety of factors, including the nature of your project, how often your faculty advisor publishes papers, and your particular role in the research lab. If you haven’t been published as an undergrad, no need to stress. There are many other ways your research can shine on an application.

I was tasked with writing my first paper in the spring of my junior year. As I am the primary person working on my research project, my faculty advisor expected me to write the paper by myself with his help and feedback. At first, this seemed to be a very daunting task. I had never written an entire academic paper by myself before, and I had no idea where to begin. The writing process took much longer than I expected (I didn’t finish until Fall 2019), and the paper I submitted is currently under review. In this blog post, I will share what I learned while writing my first academic paper. As a biomedical engineering major, my experience is a reflection of the norms within the engineering field. However, I hope that some of these tips will prove useful for those in all majors.

Getting Started

I began my first draft of my paper as I had begun many other papers I have written- with an introduction. When I showed my first draft to my PI, he told me that it is actually most common in the engineering field to begin writing an academic paper by constructing the figures. At first, I thought this seemed rather counterintuitive. Shouldn’t the figures be based on the writing, rather than the other way around? There are several reasons why the opposite is actually true. Firstly, the figures are the most eye-catching part of every paper and sometimes the only thing a reader will look at. In addition, many journals have figure limitations so the figures that are chosen must be carefully thought out in order to maximize their effectiveness. Lastly, constructing the figures first establishes a clear outline that you can follow as you write the rest of the paper.

Writing the Paper

Writing the actual paper is a long process that typically involves many revisions. I found it helpful to read papers from the same journal I was submitting to in order to get an idea of typical paper formats in that journal. I would also recommend seeking feedback at several stages of the writing process. Don’t wait until the entire paper is finished before showing it to your PI, instead, ask for feedback after the first draft of each section is finished. As an academic paper can have anywhere from five to hundreds of sources, I would also suggest using a citation manager as you write. This will save you from having to constantly update the sources in the paper as you add and revise.

Submitting the Paper

In my case, my PI submitted the paper and is the primary contact with the journal. However, I was expected to fully format the paper before I gave it to him to submit. If you visit the website of the journal you are submitting to, there will be details on the formatting expectations. Reformatting the entire paper after it has been written can be a lot of work, so it’s helpful to review these before you begin writing. Often, it is expected that you include a letter to the editor requesting for your paper to be considered, which you may or may not have to write depending on your PI.

After Submission

Depending on the journal, it can be up to several months before you hear back about your submission. In my case, I heard back from the reviewers about two months after submission. There were two reviewers for the paper I submitted, though this number will likely vary depending on the journal. The comments that were made were useful and provided good insight into an outsider’s perspective on my research. It is very common for journals to request revision and resubmission, so don’t expect the first paper you submit to be published!

Although writing an academic paper is challenging, I found it to be a very rewarding experience. I now appreciate how much work it takes to write a good paper and I feel like I grew as a scientific writer throughout the process. If you feel that your research deserves to be published, don’t be afraid to reach out to your PI and ask them if they think you could write a paper. Even if it is never published, writing about your research is an excellent way to become a better writer and also understand your own research area more fully.

Ariane is a senior majoring in biomedical engineering and Spanish. Click here to learn more about Ariane.

• Discoveries
• Right Journal
• Journal Metrics
• Journal Fit
• Abbreviation
• In-Text Citations
• Bibliographies
• Writing an Article
• Peer Review Types
• Acknowledgements
• Withdrawing a Paper
• Form Letter
• ISO, ANSI, CFR
• Google Scholar
• Journal Manuscript Editing
• Research Manuscript Editing

Book Editing

• Manuscript Editing Services

Medical Editing

• Bioscience Editing
• Physical Science Editing
• PhD Thesis Editing Services
• PhD Editing
• Master’s Proofreading
• Bachelor’s Editing
• Dissertation Proofreading Services
• Best Dissertation Proofreaders
• Masters Dissertation Proofreading
• PhD Proofreaders
• Proofreading PhD Thesis Price
• Journal Article Editing
• Book Editing Service
• Editing and Proofreading Services
• Research Paper Editing
• Medical Manuscript Editing
• Academic Editing
• Social Sciences Editing
• Academic Proofreading
• PhD Theses Editing
• Dissertation Proofreading
• Proofreading Rates UK
• Medical Proofreading
• PhD Proofreading Services UK
• Academic Proofreading Services UK

Medical Editing Services

• Life Science Editing
• Biomedical Editing
• Environmental Science Editing
• Pharmaceutical Science Editing
• Economics Editing
• Psychology Editing
• Sociology Editing
• Archaeology Editing
• History Paper Editing
• Anthropology Editing
• Law Paper Editing
• Engineering Paper Editing
• Technical Paper Editing
• Philosophy Editing
• PhD Dissertation Proofreading
• Lektorat Englisch
• Akademisches Lektorat
• Lektorat Englisch Preise
• Wissenschaftliches Lektorat
• Lektorat Doktorarbeit

PhD Thesis Editing

• Thesis Proofreading Services
• PhD Thesis Proofreading
• Proofreading Thesis Cost
• Proofreading Thesis
• Thesis Editing Services
• Professional Thesis Editing
• Thesis Editing Cost
• Proofreading Dissertation
• Dissertation Proofreading Cost
• Dissertation Proofreader
• Correção de Artigos Científicos
• Correção de Trabalhos Academicos
• Serviços de Correção de Inglês
• Correção de Dissertação
• Correção de Textos Precos
• 定額 ネイティブチェック
• Copy Editing
• FREE Courses
• Revision en Ingles
• Revision de Textos en Ingles
• Revision de Tesis
• Revision Medica en Ingles
• Revision de Tesis Precio
• Revisão de Artigos Científicos
• Revisão de Trabalhos Academicos
• Serviços de Revisão de Inglês
• Revisão de Dissertação
• Revisão de Textos Precos
• Corrección de Textos en Ingles
• Corrección de Tesis
• Corrección de Tesis Precio
• Corrección Medica en Ingles
• Corrector ingles

Select Page

How To Write a Research Paper Step by Step

Posted by Rene Tetzner | Aug 5, 2021 | Paper Writing Advice | 0 |

How To Write a Research Paper Step by Step This step-by-step guide to how to write a successful academic or scientific research paper outlines the steps that must be taken when writing about advanced research for formal publication, conference presentation, university credit, online sharing and other means of professional dissemination. Beginning with the development of an engaging and relevant research topic and one or more research questions or hypotheses, authors are advised to follow eight essential steps to meet requirements and prepare a well-written and carefully organised research paper that clearly communicates with readers.

The arrangement of the steps as I present them here will prove effective for most research papers in the arts and sciences, but it is important to remember that there can be considerable overlap among these steps, and the order in which they are completed may vary depending on the topic and the author’s approach to research and writing. The different aspects of a research paper tend to develop gradually as the planning and writing process advances, with work on one step frequently affecting work on earlier as well as later steps. A flexible approach to the writing process that accommodates the unique nature of the current research and the positive role of reflection and revision will enable the best use of this step-by-step guide.

Eight Essential Steps for Writing an Excellent Research Paper STEP 1: Choosing and Developing the Research Topic An interesting and relevant research topic is an absolute necessity for a successful academic or scientific research paper. There will always be trendy or fashionable topics that prove, at least for a fleeting moment, interesting to an extremely wide audience, but most advanced research is reported primarily for rather specific groups of readers, such as fellow researchers within a discipline and professional practitioners. Those targeted or ideal readers should therefore be anticipated and kept firmly in mind to inspire the development and refinement of a robust topic that will demand original research and help the author generate valuable new knowledge.

The topic of a research paper should also fit, in both focus and range, the intended venue, so learning about the goals and objectives of the peer-reviewed journal, scholarly website, professional conference or other destination for a research paper is vital. Remember as you work that the most engaging and promising research topics are not usually finalised in a moment, a day or even a week. Alterations and refinements are often motivated by writing about the new research as well as by reading about the similar work of fellow researchers, and even careful rereading of one’s own fully drafted paper can lead to significant and productive shifts in a research topic.

STEP 2: Designing Research Questions and Hypotheses An excellent way to focus the report and discussion of original research is to design one or more research questions or hypotheses that can be answered or tested via the current research and the author’s interpretation of its findings. Research questions and hypotheses can help the researcher as well as his or her readers understand the purpose and value of the research. Designing them early, presenting them clearly in the paper’s introductory material and returning to answer and discuss them after the results have been reported provide a solid thread on which to weave a focussed and logical argument.

It is essential to give considerable thought to the nature and wording of research questions and hypotheses in relation to the research methods employed, ensuring in all cases that any questions can in fact be answered and any hypotheses tested through the chosen methods. For this reason research questions and hypotheses are often designed in conjunction with the research methods for a project. For some types of papers research questions and hypotheses are mandatory. Even if they are not, however, they can usually be included in any type of research paper and are especially useful writing tools, enabling the author to address a research problem and future readers to understand it in clear and constructive ways.

STEP 3: Preparing a Working Outline of the Research Paper Although some successful academic and scientific authors claim never to bother with outlines for their research papers, many others would never proceed without a carefully designed outline. A working outline offers the author, particularly an author new to writing about research, an excellent way in which to plan the content and structure of a research paper that will meet the many requirements usually associated with reporting advanced research in a professional and publishable manner. Obviously, whatever sections, subsections and other elements are needed to report and discuss the current research should be incorporated along with notes about the contents of these parts, but so too should the preferences indicated by a publisher’s guidelines for authors, a website’s instructions for contributors’ posts, a conference organiser’s rules for presenters or an instructor’s template for course papers.

For some papers the guidelines and requirements will be detailed and extensive; for others they will be brief or vague or virtually nonexistent. The trick in all cases is to discover the relevant guidelines and observe them with as much precision and consistency as possible as you plan a paper that also presents your work as clearly and concisely as possible. The length of a paper, its structure and the documentation style of its references are often determined by guidelines, so keep an eye open for details about these aspects of the paper in particular. Although preparing a detailed outline that includes internal headings and subheadings as well as notes about what each part of the paper should contain and achieve can be time consuming, such an outline can also serve as a working template for drafting the paper itself and thereby significantly increase the efficiency of the writing process.

STEP 4: Creating Tables, Figures and Other Support Documents Another strategy for rendering the writing of a research paper a more efficient and successful process is to assign certain information to tables, figures, appendices and other visual and support documents before beginning to draft the paper itself. Research results that consist of complex numerical data, detailed descriptions of research methods or in-depth case studies are examples of the kind of information that can effectively be presented in these visual and support documents. Such elements should be carefully designed to communicate their contents as clearly as possible, and consistency of design across elements of the same kind or those serving a similar purpose is advisable to enable comparative analysis.

If the visual and support documents for a research paper are designed and created before the main text is drafted, unnecessary repetition of information can be more easily avoided. In addition, arranging complicated information in the visual formats of tables and figures can help the researcher as well as future readers detect and better understand important patterns and trends in the results. This can, in turn, significantly enhance the interpretation and discussion of the findings, particularly when an author is dealing with complex data. Furthermore, separating helpful but not strictly necessary details from the running text of a paper and placing them in appendices or archives can make them more readily digestible while streamlining the main argument and rendering the research paper as a whole more appealing to general as well as specialist audiences.

STEP 5: Drafting the Research Paper Section by Section With a working outline and an early version of the tables, figures and other support documents in hand, the process of drafting the main text of the research paper can begin. Because every necessary part and detail of the paper must ultimately be completed and included in the right place, the outline should always be followed with care, ensuring that each section and element is drafted in some form on the first attempt, including any required preliminary and final material.

While every part of the paper should be drafted, however, the bits and pieces need not be drafted in the order in which they will finally appear for readers. A more practical approach may be to work at the first draft in whatever order proves easiest, starting, for instance, with the description of methods or the report of results, following those with drafts of the discussion and conclusion, and finishing at the beginning with background or introductory material. The title, abstract, keywords and other preliminary and final matter such as acknowledgements, image credits and professional declarations can be added at any time, but some of them – the abstract and acknowledgements, for instance – will be best written after all parts of the main text are drafted.

Each and every element of the research paper should be carefully written to achieve its specific purposes, whether those may be increasing accessibility and attracting potential readers or analysing and discussing research results. Language that is specific and precise in explaining facts and ideas is advisable for a research paper, and it is always essential to write well, using a concise and formal style, complete sentences and accurate grammar, spelling and punctuation to ensure clear and professional communication of all aspects of the research.

STEP 6: Adding Scholarly Citations and References Among the many aspects of an academic or scientific research paper that must never be neglected are the citations and references that acknowledge the work, publications and ideas of other authors and researchers. These should, of course, be included among the various parts of the research paper drafted in Step 5, but it is so very important to acknowledge sources, give credit where credit is due and generally tie one’s own research and its implications into the broader network of original research and advancing knowledge that I consider the addition of in-text citations and complete bibliographical references as a separate step here.

Many scholarly authors add the in-text citations, at least in a rough or cursory form, as they draft each section of the paper. Although this approach may not be strictly necessary, it is an extremely effective way to ensure that all the necessary citations are present and to avoid the dangers of unintentional plagiarism and embarrassing errors. These in-text citations can then be checked and finalised when the complete bibliographical references are listed at the end of the paper. As a general rule, every source cited should appear in the list of references and every source in that list should be cited in the text. Since most disciplines, publishers and instructors have stylistic preferences for scholarly references, guidelines must always be consulted, and correct and thorough information in the right style and order must be provided for every source used.

STEP 7: Proofreading, Editing and Refining the Paper It is a very rare and exceptional first draft of an academic or scientific research paper that ends up published by a reputable journal or awarded with a top-notch grade. Successful research papers are, generally speaking, papers that have been carefully written, revised, edited, proofread and often revised and edited all over again by their authors. Such careful attention and reflection enable the improvement of language and style, the clarification of content and structure, the refinement of argument and interpretation, the correction of errors and confusing information, and the development of logical transitions between the various sections and elements of the paper.

Numerical data, tables and figures, bibliographical references and any information that is repeated in different places in the paper are among those aspects that usually require special checks to ensure accuracy and consistency. If language problems prevent clear communication, the help of a professional proofreader or editor may be advisable, and asking a trusted mentor or colleague, particularly one who has successfully published research similar to your own, to read and comment on the paper is also an excellent idea. Remember, however, that this strategy will prove most useful to authors who are willing to receive the feedback in a constructive manner and seriously consider alterations and improvements.

STEP 8: Sharing or Submitting the Research Paper Appropriately Having dedicated so much time and effort to planning, drafting and perfecting a research paper, an academic or scientific author might be thought mad indeed to submit the paper to a potential publisher in any other manner than that required to ensure the best possible reception. Yet too any researchers come to the end of the writing process only to neglect submission requirements and generate a less than desirable initial response. This disappointment can easily be prevented by checking the guidelines or instructions carefully and submitting, for example, a perfectly formatted paper of the right length to a journal editor and accompanying it with a well-written and informative cover letter.

Never forget the importance of providing exactly what is wanted and expected. The organisers of a conference do not want a fifteen-minute paper that runs on for half an hour and the creators of a website do not want blogs formatted in ways that simply do not work on their site. The paper you provide must be appropriate for the venue, and professionalism should be maintained in this and other ways when working to publish and otherwise share advanced research. A professional perspective can be especially challenging to maintain when faced with less than positive comments from editors, peer reviewers and other early readers with strong opinions, so remember that achieving some degree of objectivity and focussing on producing the best research paper possible can be immensely helpful approaches.

You might be interested in Services offered by Proof-Reading-Service.com

Journal editing.

Journal article editing services

PhD thesis editing services

Scientific Editing

Manuscript editing.

Manuscript editing services

Expert Editing

Expert editing for all papers

Research Editing

Research paper editing services

Professional book editing services

How To Write an Academic Research Paper in 8 Steps

Related posts.

How To Write a Journal Article

September 6, 2021

How To Write the Findings Section of a Research Paper

September 2, 2021

Tips on How To Write a Journal Article

August 30, 2021

How To Write Highlights for an Academic or Scientific Paper

September 7, 2021

Our Recent Posts

Our review ratings

• Examples of Research Paper Topics in Different Study Areas Score: 98%
• Dealing with Language Problems – Journal Editor’s Feedback Score: 95%
• Making Good Use of a Professional Proofreader Score: 92%
• How To Format Your Journal Paper Using Published Articles Score: 95%
• Journal Rejection as Inspiration for a New Perspective Score: 95%

Explore our Categories

• Abbreviation in Academic Writing (4)
• Career Advice for Academics (5)
• Dealing with Paper Rejection (11)
• Grammar in Academic Writing (5)
• Help with Peer Review (7)
• How To Get Published (146)
• Paper Writing Advice (17)
• Referencing & Bibliographies (16)

How to write an abstract for a research paper

Read about three elements to include in your research paper abstract and some tips for making yours stand out

Ankitha Shetty

• More on this topic

Created in partnership with

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} The secrets to success as a provost

Using non verbal cues to build rapport with students, emotionally challenging research and researcher well-being, augmenting the doctoral thesis in preparation for a viva, how hard can it be testing ai detection tools.

Writing an abstract might not seem to be at the top of your list of priorities when writing your PhD dissertation , but it’s probably the first thing a reader will see when they encounter your research, so it’s worth putting the effort in to get it right. Here are some ways to make it sing. 

What is an abstract?

An abstract is a concise overview of an extensive piece of research work such as a thesis, dissertation or research paper. Depending on the discipline, it usually contains the purpose of the research, the methodologies employed and the conclusions derived. Abstracts typically range from 500 to 800 words and appear on a separate page after the title page and acknowledgements, but preceding the table of contents. Although it might be tempting to start your thesis by drafting your abstract, I advise postponing until you’ve completed a first draft so that you ensure you cover all topics discussed in your thesis.

What to include in your abstract

Purpose of the study.

Begin your abstract by concisely defining the problems your study addresses or outlining the gaps in knowledge it fills. It should provide the reader with new and useful information regarding your research in the present or past tense. Use verbs such as “test”, “evaluate” and “analyse” to make the research objective specific, measurable, attainable and time-bound. Avoid providing detailed background information and personal opinions at this stage.

In this part of your abstract, explain how you designed and conducted your research and how it addresses your research questions in the past tense. The aim here is to give the reader a prompt insight into your approach, not to evaluate challenges, validity and reliability. Highlight the samples you used and the data collection and analysis tools you employed. 

• Campus resource collection: What I wish I’d known about academia
• Campus resource collection: Resources on academic writing
• What is your academic writing temperament?

Results and conclusion

Summarise and highlight the most significant findings that will allow the reader to understand the conclusions in the present or past tense. At the end of your abstract, the reader ought to have a firm grasp of the main argument. If the motive of the research is to resolve a real-world issue, you can include practical implications and suggestions in the findings. Briefly offer future recommendations for further research, if applicable. 

When writing your abstract, imagine who might read your research; a curious reader, not necessarily an expert in the field, expects the information to be accessible and not overly complex. 

Tips on how to write an abstract for a research paper

• Explain why you chose this area of research and the significance of the study
• Ask yourself “why?” “what?” “how?” and “so what?” and use the abstract to address these questions. 
• Highlight the novelty of your research 
• Explain how your research adds to the existing body of literature on the topic
• Explain your research design, highlighting elements such as approach, demographics, sampling and geographical information
• Explain how your research is relevant and significant
• Address practical implications to potential interested parties – for example, any issues relating to policy 
• Avoid technical jargon, generalised statements and vague claims that make your work difficult to read
• Avoid acronyms and abbreviations at this stage. Add them into the introduction instead 
• Provide concise, consistent and accurate details
• Adhere to the word count limit specified in your instructions
• Include essential keywords for search engine optimisation
• There’s no need to include references at this stage
• Never copy and paste content directly from elsewhere in the thesis; use new vocabulary and phrases to differentiate the abstract from the rest of the text.

These tips will help to make the abstract writing process smoother, allowing you to make a good first impression on whoever comes across your work when you’re ready to send it out into the world.

Ankitha Shetty is an assistant professor (senior scale) at the department of commerce and a coordinator at the Centre for Doctoral Studies at Manipal Academy of Higher Education, India.

If you would like advice and insight from academics and university staff delivered direct to your inbox each week, sign up for the Campus newsletter.

The secrets to success as a provost

Emotions and learning: what role do emotions play in how and why students learn, the podcast: bringing an outsider’s eye to primary sources, a diy guide to starting your own journal, formative, summative or diagnostic assessment a guide, harnessing the power of data to drive student success.

Register for free

and unlock a host of features on the THE site

5 Tips Before You Publish Your Dissertation

5 essential tips for graduate students to prepare their dissertations for publication, from conducting a literature review to meeting requirements.

Kate Windsor

Jun 11, 2024

Publishing a dissertation is a significant milestone for any graduate student. It marks the culmination of years of hard work, research, and dedication. However, before submitting your dissertation for publication, there are several essential steps you should take to ensure that your work is polished, error-free, and meets the requirements of your chosen journal or publisher.

In this article, we'll explore five crucial tips that every graduate student should follow before publishing their dissertation.

Dissertation Writing Essentials

Conduct a thorough literature review.

A comprehensive literature review is a critical component of any dissertation. It provides a foundation for your research by summarizing and synthesizing existing knowledge in your field. Conducting a thorough literature review involves identifying relevant sources, critically analyzing their content, and synthesizing the information to identify gaps in current research.

By doing so, you can establish a strong theoretical framework for your dissertation and demonstrate your ability to engage with complex ideas and concepts.

To conduct a successful literature review, start by defining your research question and identifying key search terms. Use academic databases and search engines to find relevant books, articles, and other sources. As you read, take detailed notes and organize your findings by theme or topic.

Remember to evaluate the quality and relevance of each source and consider how it contributes to your central argument.

Crafting Your Writing Style

Develop a clear and concise writing style.

A well-written dissertation chapter is essential for effectively communicating your research findings to your target audience. Developing a clear and concise book writing style involves using proper sentence structure, avoiding jargon and technical language, and organizing your ideas in a logical and coherent manner.

When engaging in academic writing, it's crucial to keep your writing style in mind to ensure that your dissertation is accessible and engaging to your readers.

When writing your dissertation chapter, aim for clarity and simplicity. Use short, direct sentences and avoid using unnecessary words or phrases. Break up long paragraphs into shorter, more manageable sections, and use headings and subheadings to guide your reader through your argument.

By adopting a clear and concise writing style, you can make your dissertation chapter more readable and easier to understand, even for readers who may not be experts in your field.

It's also essential to ensure that your academic writing is free of grammatical and punctuation errors. Consider using a grammar checker or asking a friend or colleague to proofread your work. Remember, a poorly written dissertation chapter can undermine the credibility of your research, so take the time to refine your writing style before submitting your work for publication.

By paying attention to your writing style and ensuring that your dissertation chapter is error-free, you can demonstrate your commitment to producing high-quality academic writing that effectively communicates your research findings.

Understanding Academic Publishing

Familiarize yourself with academic publishing guidelines

Academic publishing guidelines vary depending on the journal or publisher you choose. However, understanding the basics of academic publishing can help streamline the publishing process and increase your chances of success.

When preparing your dissertation for publication, it's essential to familiarize yourself with the conventions of your field, including the structure of journal articles and the use of qualitative research methods.

Start by researching the submission guidelines for your target journal or publisher. Pay attention to details such as word count, formatting requirements, and citation style. Some publications may also have specific requirements for the structure of your manuscript, such as the order of sections or the inclusion of particular elements like an abstract or keywords. Understanding these guidelines is crucial when preparing a book proposal or manuscript for academic publishing.

It's also essential to understand the conventions of your field, such as the use of qualitative or quantitative research methods, the structure of journal articles, and the expectations for data analysis and interpretation. For example, if you're preparing a book proposal for academic publishing, you may need to include a detailed outline of your manuscript, a sample chapter, and a description of your target audience.

By familiarizing yourself with these conventions, you can ensure that your dissertation meets the standards of your academic community and increases your chances of successful publication in academic publishing outlets, such as scholarly journal articles or academic books.

Easily pronounces technical words in any field

When preparing your manuscript for academic publishing, it's important to keep in mind that the structure and content of journal articles can vary significantly depending on your field and the specific journal you're targeting. Some journals may require a specific format for the abstract, introduction, methods, results, and discussion sections, while others may have more flexible guidelines.

By researching the requirements of your target journal and understanding the conventions of journal articles in your field, you can tailor your manuscript to meet the expectations of academic publishing and increase your chances of acceptance.

Similarly, if you're preparing a book proposal for academic publishing , it's important to understand the expectations of publishers in your field. This may include providing a detailed overview of your manuscript, outlining the key arguments and contributions of your work, and demonstrating how your book fits into the broader landscape of academic publishing.

By crafting a compelling book proposal that meets the standards of academic publishing, you can increase your chances of securing a publishing contract and sharing your research with a wider audience.

Edit and proofread your dissertation carefully

Editing and proofreading are critical steps in the dissertation writing process. They involve reviewing your work for clarity, coherence, and consistency, and making revisions as necessary to improve the overall quality of your manuscript and avoid unnecessary re writing.

When you are at the editing portion of your dissertation writing process, focus on the big picture elements such as the structure of your argument, the flow of your ideas, and the clarity of your writing. Look for opportunities to streamline your prose, eliminate redundancies, and ensure that your ideas are presented in a logical and coherent manner.

Once you've finished editing, it's time to proofread your work for errors in grammar, punctuation, and spelling. Read your dissertation carefully, line by line, and consider using a spelling and grammar checker to catch any mistakes you may have missed.

It's also a good idea to seek feedback from your supervisor, committee members, or a professional editor or proofreader. Fresh eyes can help identify areas for improvement and ensure that your dissertation writing is polished and ready for publication.

Preparing for Submission

Ensure your dissertation meets the requirements

Before submitting your dissertation for publication, it's crucial to ensure that it meets all the necessary requirements. This includes formatting your book manuscript according to the guidelines provided by your chosen journal or publisher, ensuring that your abstract and keywords are accurate and informative, and preparing a cover letter or other materials as required.

When preparing your book manuscript for publication, pay close attention to details such as page numbering, heading styles, and citation format. Many publications have strict guidelines for these elements, and failing to follow them can result in your manuscript being rejected outright.

By carefully reviewing and adhering to these guidelines, you can ensure that your book manuscript meets the requirements of the publishing process and increases your chances of acceptance.

It's also essential to ensure that your dissertation is free of plagiarism and that all sources are properly cited. Consider using a plagiarism checker to identify any potential issues and make sure to review your work carefully to ensure that all sources are accurately referenced.

This is a critical step in the book publication process, as plagiarism can lead to serious consequences and damage your reputation as a researcher.

Before submitting your dissertation for book publication, take the time to review the submission guidelines carefully. Make sure you have included all required materials, such as a cover letter, author bio, or acknowledgments, and that your book manuscript is submitted in the correct format and through the appropriate channels.

By thoroughly reviewing the submission guidelines and ensuring that your manuscript meets all the necessary requirements, you can streamline the publishing process and increase your chances of successful book publication.

Remember, the book publication process can be complex and time-consuming, but by taking the time to carefully prepare your book manuscript and follow the submission guidelines, you can navigate the process successfully and share your research with a wider audience.

Whether you're submitting your dissertation to a scholarly press or exploring other book publication options, ensuring that your manuscript meets the necessary requirements is a critical step in the publishing process.

With careful preparation and attention to detail, you can successfully navigate the publishing process and share your research with the wider academic community.

Publishing your dissertation is a significant milestone that reflects years of hard work, dedication, and intellectual growth. By following these five essential tips – conducting a thorough literature review, developing a clear and concise writing style, understanding academic publishing guidelines, editing and proofreading carefully, and ensuring your manuscript meets all submission requirements – you can enhance the quality and impact of your final publication.

Whether you're submitting to a scholarly journal or exploring book publication options, attention to detail and adherence to guidelines are crucial for success in the competitive world of academic publishing.

Ultimately, publishing your dissertation is not just a personal achievement; it's a contribution to the collective knowledge and understanding of your field. By sharing your research with the wider academic community, you have the opportunity to spark new ideas, inspire further research, and make a lasting impact on your discipline.

As you embark on this exciting new chapter, approach the publishing process with diligence, patience, and a commitment to excellence, knowing that your hard work and dedication will pay off in the form of a successfully published dissertation that showcases your expertise and advances your academic career.

Dissertation Submission Requirements

How to Publish Your Dissertation

Preparing Your Dissertation for Publication

Dissertation Writing Best Practices

Academic Publishing Guidelines

Dissertation Publishing Tips

Recent articles

30 ChatGPT Prompts for Academic Writing

Amethyst Rayne

Jun 19, 2024

Writing Tips

Academic Success

ChatGPT Prompts

I Want to Study but Can't Focus: 9 Tips to Improve Concentration

Physical Health

Concentration

Mindfulness

How to Write a Thesis Conclusion: 5 Tips

Jun 20, 2024

Writing Skills

Research Tips

Academic Writing

Thesis Conclusion

Speed Reading: What is Considered a Fast Reader?

Derek Pankaew

Reading Efficiency

Speed Reading Techniques

Reading Comprehension

Words Per Minute (WPM)

Reading Speed

Writing Lab

Research papers.

• Research Paper Basics
• Credible Sources
• Reading Scholarly Articles
• Summarizing and Paraphrasing
• Paraphrasing and Student Voice
• Direct Quotations
• Synthesis in Writing
• Citing Sources

How to Read an Academic Article

Sections of an academic article.

Most academic journal articles include the following sections:

• Abstract  (An executive summary of the study)
• Introduction (Definition of the research question to be studied)
• Literature Review (A summary of past research noting where gaps exist)
• Methods (The research design including variables, sample size, measurements)
• Data (Information gathered through the study often displayed in tables and charts)
• Results (Conclusions reached at the end of the study) Conclusion (Discussion of whether the study proved the thesis; may suggest opportunities for further research) Bibliography (A list of works cited in the journal article)

TIP: To begin selecting articles for your research, read the highlighted sections to determine whether the academic journal article includes information relevant to your research topic.

Step 1: Skim the Article

When sorting through multiple articles discovered in the research process, skimming through these sections of the article will help you determine whether the article will be useful in your research.

• Article title  and subject headings assigned to the article
• Introduction

If the article fits your information needs, go back and read the article thoroughly. TIP: Create a folder on your computer to save copies of articles you plan to use, and save your references.

Step 2: Determine Your Purpose

Think about how you will evaluate the academic articles you find and how you will determine whether to include them in your research project.  Ask yourself the following questions to focus your search in the academic literature: ​

• Are you looking for an overview of a topic or an explanation of a specific concept, idea, or position?
• Are you exploring gaps in the research to identify a new area for academic study?
• Are you looking for research that supports or disagrees with your thesis or research question?
• Are you looking for examples of a research design and/or research methods you are considering for your own research project?

Step 3: Read Critically

Before reading the article, ask yourself the following:

• What is my research question? What position am I trying to support?
• What do I already know about this topic?  What do I need to learn?
• How will I evaluate the article?  Author's reputation? Research design? Treatment of topic? 
• What are my biases about the topic?

As you read the article make note of the following:

• Who is the intended audience for this article?
• What is the author's purpose in writing this article?
• What is the main point?
• How was the main point proven or supported?  
• Were scientific methods used in conducting the research? Do you agree or disagree with the author? Why?
• How does this article compare or connect with other articles on the topic?
• Does the author recommend areas for further study?
• How does this article help to answer your research question?
• << Previous: Credible Sources
• Next: Summarizing and Paraphrasing >>
• Last Updated: Jun 18, 2024 4:44 PM
• URL: https://guides.rasmussen.edu/research-papers

• Publication Process

How to Write a Cover Letter for Your Manuscript? Here are the Tips and Examples

• 3 minute read

Table of Contents

A cover letter is often the first thing an editor reads when reviewing your submission. As your first pitch to the editor, the cover letter helps them gauge the suitability of your manuscript for publication in their journal. Imagine your work shaping the future of your field, gathering citations, and sparking discussions. A powerful cover letter is thus the first step to making that vision into a reality.   

In this article, we will guide you through the process of writing an effective cover letter and explain how you can get it right every time with examples. First, let us get started with the basics!  

Getting the Basics Right  

When writing a cover letter, it is crucial to address the editor by their correct and complete name¹ . If there are multiple co-editors, you can address your letter to the right person, based on their specialization or designated responsibilities. If unsure, it is okay to go with a more general salutation, such as “Dear Editors”¹ .   

Presenting your Research  

Provide a clear and concise title for your submission and specify whether it is an article, communication, review, perspective, or a manuscript belonging to some other category. If the journal guideline recommends, consider including a list of all authors in the manuscript.   

After covering the preliminary information, briefly explain your paper’s central theme or focus to give the editor an idea of its contents. Ensure this stays a brief outline, without going into too much detail.   

Conveying the Importance of Your Work  

How you communicate the impact of your work can make or break your cover letter. To make a strong impression on the editor, articulate the significance of your research clearly, emphasizing its relevance to the field. Additionally, show how your work aligns with the journal’s scope and mission.  

Including a Formal Declaration  

Some journals require a set of declarations from you to ensure that your manuscript adheres to its ethical code and the larger ethical standards of scientific publishing. Here are the required declarations in a cover letter:  

• Originality of work:  
• Confirm that your work is original and has not been published elsewhere. This tells the editor your research is unique.  
• Conflict of interest statement:  
• Be clear about any potential conflicts of interest. This includes any personal, financial, or professional connections that might affect your research.  
• Funding source (if applicable):  
• Tell where your research funding came from, if any. This includes any support or grants from organizations.   

Including Personal Suggestions for Reviewers on a Separate Page (optional)  

If there is no part of the submission process that collects researcher suggestions for reviewers, and there are special requests from the researcher for reviewers (e.g., recommending the inclusion or suggesting the exclusion of a specific reviewer, etc.), you may also make a note about this in the cover letter.  

Combining these five points, here is a good example of a cover letter for researchers’ reference:  

(This image is intended to demonstrate the norms of formatting and tone of expression in a cover letter, it is to be used only by the researcher as a reference in writing² .)  

Conclusion  

A strong cover letter can go a long way in ensuring success for researchers looking to publish their manuscripts! Your cover letter is the opening act, setting the stage for how editors perceive your manuscript. So, look at it not as just another formality but as a crucial opportunity to make a strong impression.   

Understanding what to include, what is optional, and what is best left unsaid can be tricky. That is where our team of experts at Elsevier Language Services can step in. We will provide personalized recommendations and expert guidance to help you craft a cover letter that perfectly complements your manuscript. Reach out to us today to make a great first impression and embark on a successful academic journey!  

Reference  

• Nicholas, D. (2019). How to choose a journal and write a cover letter. Saudi Journal of Anaesthesia, 13(5), 35. https://doi.org/10.4103/sja.sja_691_18  
• Loyola University Chicago. (n.d.). JCSHESA Sample Cover Letter. https://ecommons.luc.edu/jcshesa/cover_letter_template.pdf  

• Manuscript Preparation

Page-Turner Articles are More Than Just Good Arguments: Be Mindful of Tone and Structure!

You may also like.

Publishing Biomedical Research: What Rules Should You Follow?

Writing an Effective Cover Letter for Manuscript Resubmission

Journal Acceptance Rates: Everything You Need to Know

Research Data Storage and Retention

How to Find and Select Reviewers for Journal Articles

How to Request the Addition of an Extra Author Before Publication

Paper Rejection: Common Reasons

How to Write a Journal Article from a Thesis

Input your search keywords and press Enter.

Unfortunately we don't fully support your browser. If you have the option to, please upgrade to a newer version or use Mozilla Firefox , Microsoft Edge , Google Chrome , or Safari 14 or newer. If you are unable to, and need support, please send us your feedback .

We'd appreciate your feedback. Tell us what you think! opens in new tab/window

CRediT author statement

CRediT (Contributor Roles Taxonomy) was introduced with the intention of recognizing individual author contributions, reducing authorship disputes and facilitating collaboration. The idea came about following a 2012 collaborative workshop led by Harvard University and the Wellcome Trust, with input from researchers, the International Committee of Medical Journal Editors (ICMJE) and publishers, including Elsevier, represented by Cell Press.

CRediT offers authors the opportunity to share an accurate and detailed description of their diverse contributions to the published work.

The corresponding author is responsible for ensuring that the descriptions are accurate and agreed by all authors

The role(s) of all authors should be listed, using the relevant above categories

Authors may have contributed in multiple roles

CRediT in no way changes the journal’s criteria to qualify for authorship

CRediT statements should be provided during the submission process and will appear above the acknowledgment section of the published paper as shown further below.

*Reproduced from Brand et al. (2015), Learned Publishing 28(2), with permission of the authors.

Sample CRediT author statement

Zhang San:  Conceptualization, Methodology, Software  Priya Singh. : Data curation, Writing- Original draft preparation.  Wang Wu : Visualization, Investigation.  Jan Jansen :  Supervision. : Ajay Kumar : Software, Validation.:  Sun Qi:  Writing- Reviewing and Editing,

Read more about CRediT  here opens in new tab/window  or check out this  article from  Authors' Updat e:  CRediT where credit's due .

• Undergraduate Students
• Masters Students
• PhD/Doctoral Students
• Postdoctoral Scholars
• Faculty & Staff
• Families & Supporters
• Prospective Students
• Explore Your Interests / Self-Assessment
• Build your Network / LinkedIn
• Search for a Job / Internship
• Create a Resume / Cover Letter
• Prepare for an Interview
• Negotiate an Offer
• Prepare for Graduate School
• Find Funding Opportunities
• Prepare for the Academic Job Market
• Search for a Job or Internship
• Advertising, Marketing, and Public Relations
• Arts & Entertainment
• Consulting & Financial Services
• Engineering & Technology
• Government, Law & Policy
• Hospitality
• Management & Human Resources
• Non-Profit, Social Justice & Education
• Retail & Consumer Services
• BIPOC Students & Scholars
• Current & Former Foster Youth
• Disabled Students & Scholars
• First-Generation Students & Scholars
• Formerly Incarcerated Students & Scholars
• International Students & Scholars
• LGBTQ+ Students & Scholars
• Students & Scholars with Dependents
• Transfer Students
• Undocumented Students & Scholars
• Women-Identifying Students & Scholars

Graduate Writing Center: Strategies for Publishing Scientific Papers

• Share This: Share Graduate Writing Center: Strategies for Publishing Scientific Papers on Facebook Share Graduate Writing Center: Strategies for Publishing Scientific Papers on LinkedIn Share Graduate Writing Center: Strategies for Publishing Scientific Papers on X

Presenter: Adriana Mendez Leal, Psychology, Graduate Writing ConsultantThis workshop will focus on the process of getting an article published that most differ from other graduate writing projects, such as selecting appropriate journals and interacting with editors. We will also discuss strategies for revising articles for a target journal.

One more step:

Spread the word by sharing this event with your social networks, save it to your calendar, add to calendar.